Search
Search Results
-
Microstructure and Mechanical Properties of Active Gas Arc Welding between 304 Austenitic Stainless Steel and Q235B Low Carbon Steel
In the present study, metal active gas arc welding was carried out for dissimilar welding of 304 austenitic stainless steel and Q235B low carbon...
-
Effect of Hardening Frictional Treatment on Features of Eddy Current Testing of Fatigue Degradation of Metastable Austenitic Steel under Gigacycle Contact Fatigue Loading
AbstractPrevious studies have shown the possibility of eddy current monitoring of fatigue degradation during contact loading of austenitic AISI 321...
-
The Effect of the Pre-strain Process on the Mechanical Properties, Microstructure, Fatigue Life, and Fracture Mode of 304 Austenitic Stainless Steel
In the present study, the effect of pre-strain process on the mechanical properties, microstructure, fatigue life, and fracture mode of 304...
-
Manufacturing and Characterization of Plasma Gas Tungsten Arc-Welded Pipes Made of a Ni-Reduced Austenitic Stainless CrMnNi Steel
In this study, a Ni-reduced austenitic stainless TRIP/TWIP steel with < 5 vol.% δ -ferrite was investigated before and after plasma arc welding and...
-
Effect of Alternating Cold Elastoplastic Deformation on Austenitic Decomposition during Tension of 08Kh18N10 Steel
AbstractThe effect of preliminary cold alternating elastoplastic deformation of 08Kh18N10 steel on the austenitic transformation caused by tension in...
-
Characterization of Armour Steel Welds Using Austenitic and Ferritic Filler Metals
In this study, fillet welding processes were performed on high strength Miilux Protection 500 (MIL-A-46100) steel, which is used as armour material...
-
A Study on Phase Evolutions and Tensile-Shear Performance of Dissimilar Resistance Spot Welds Formed Between AISI 430 Ferritic Stainless Steel and AISI 321 Austenitic Stainless Steel
This article addresses the phase evolutions and mechanical properties of dissimilar spot welds formed between AISI 430 stainless steel (FSS) and AISI...
-
High-Temperature Plasticity Enhanced by Multiple Secondary Phases in a High-Si Austenitic Stainless Steel
An austenitic stainless steel with 6 wt% Si and multiple secondary phases was produced with the aim to achieve enhanced plasticity during hot...
-
Temperature Dependency of Hydrogen Embrittlement in Thermally H-precharged STS 304 Austenitic Stainless Steel
In the present study, the resistance to hydrogen embrittlement (HE) of STS 304 austenitic stainless steel was investigated at a wide range of...
-
Phase Stability and Deformation Modes in Functionally Graded Metastable Austenitic Stainless Steel; A Novel Approach to Evaluate the Role of Nitrogen
An austenitic stainless steel AISI 304 plate was functionally graded by interstitial alloying with nitrogen by high-temperature solution nitriding,...
-
Influence of rare earth Ce on hot deformation behavior of as-cast Mn18Cr18N high nitrogen austenitic stainless steel
The hot deformation behavior of Mn18Cr18N and Mn18Cr18N+Ce high nitrogen austenitic stainless steels at 1173–1473 K and 0.01–1 s −1 were investigated...
-
Residual Stress Formation and Distortion in Austenitic AISI304 Steel Pipe Weldment with Consideration of Latent Heat using Novel Prescribed Weld Temperature
The utilization of Austenitic AISI304/SUS304/SS304 has become prevalent in the fabrication of superheaters and re-heaters tubes within advanced...
-
Wear and Electrochemical Behavior of High-Nitrogen, Nickel-Free Austenitic Stainless Steel Produced by Hot Powder Forging
The microstructure, wear-resistance, and electrochemical behavior of high-nitrogen, nickel-free, nanostructured austenitic stainless steel,...
-
Prediction of Surface Microstructure, Grain Size, Martensite Content, and Microhardness of 316L Austenitic Stainless Steel in Surface Mechanical Grinding Treatment Process
Surface mechanical grinding treatment (SMGT) is a promising surface strengthening technique by exerting gradient microstructure, phase...
-
Effect of Annealing on Precipitation Hardening Behavior of 4% Al Austenitic Steel During Creep
Austenitic steel AFA alloyed with 4% Al is studied in the state as delivered and after annealing at 1050 and 1230°C. The chemical composition of the...
-
Effect of Molybdenum Electron-Beam Cladding on the Heat and Wear Resistances of Surface Layers of Chromium-Nickel Austenitic Steel 12Kh18N9T
The structure and properties of surface layers of billets from steel 12Kh18N9T formed by vacuum electron beam surfacing of powder mixtures are...
-
Resource-Saving-Type High-Nitrogen Austenitic Stainless Steel
Since the addition of nitrogen to steel makes it brittle, it has long been discouraged to treat nitrogen as an alloying element.
-
Detwinning Phenomenon and Its Effect on Resulting Twinning Structure of an Austenitic Hadfield Steel
Hadfield Steel shows high strain hardening which can be linked to its ability to form twins during mechanical loading. Twinning in Hadfield Steel is...
-
Diagnostics of power boiler superheater tubes made of austenitic steel using the metal magnetic memory technique
Superheater tubes made of non-magnetic austenite steel are widely used in modern power boilers. During boilers operating process, as a result of...
-
Synergistic Effect of B and Y Micro-alloying on Oxide-Layer Formation on the Super-austenitic S31254 Stainless Steel
Aiming to address the Mo volatilization problem of super-austenitic stainless steel at high temperature, the S31254 steel containing B and rare earth...
