Search
Search Results
-
The Influence of Operating Conditions on the Structure and Mechanical Properties of Die 4Kh4N5M4F2 Steel
The structure and mechanical properties of 4Kh4N5M4F2 steel in thermodeformed and cast states after quenching and tempering, and additional heating...
-
Effect of the Purity of Charge Materials and Heat Treatment Parameters on the Structure and the Mechanical Properties of U10A Forge Tool Steel
AbstractThe structure and mechanical properties of a high-carbon U10A tool steel (analogs are G51320 and 1.1545) melted in an electric arc furnace...
-
A Hybrid Optimization Approach of Single Point Incremental Sheet Forming of AISI 316L Stainless Steel Using Grey Relation Analysis Coupled with Principal Component Analysiss
We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis (GRA) coupled with...
-
The Material Removal Rate of AISI H13 Tool Steel in the Roughing EDM Process with Mixing Powder: Influence Analysis and Optimization of Major Process Parameters
In powder-mixed electric discharge machining, the evaluation of material removal rate (MRR) in the finishing, semi-finishing, and roughing processes... -
Analyses of Low-Power Microwave Drilling of Stainless Steel-304
Microwave machining is considered a potential technique to process some nonmetals and a few metals. The technique is found promising at low microwave...
-
Suitability of Pristine Carbon Nanotube Yarn Tool for Material Removal by Electrical Discharges
High-intensity electrical discharges are used in the unconventional technique known as electrical discharge machining (EDM) to machine metals of any...
-
Optimization of Machining Parameters and Analysis of the Surface Characteristics in Micro-electrical Discharge Machining of 310 and 316 Stainless Steel
An experimental investigation was performed using a tungsten carbide tool to study the micro-electrical discharge machining behavior of two different...
-
Application of nickel plating by galvanization on steel surface of brazed cemented carbide-maraging steel joints
Recently, the integration of a maraging steel heat treatment into a vacuum brazing has been conducted successfully to manufacture high-strength and...
-
Influence of Sulfur on the Splitting Fracture and Machining Performance of Microalloyed Medium-Carbon Steel 36MnVS4 Connecting Rods
The differences of 0.032% and 0.066% sulfur content on the splitting fracture and machining properties of microalloyed medium-carbon steel 36MnVS4...
-
Comparison of CrN and CrTiN Hard Coatings Developed on SiAlON Tool Inserts via Magnetron Sputtering Process
The present study comparatively examines the CrN and CrTiN hard coatings developed on SiAlON ceramic tool inserts via magnetron sputtering PVD...
-
The Microstructure Refinement and Mechanical Properties Improving of Friction Stir Processed Fe–Mn–Cr–N Steel
Fe–Mn–Cr–N austenitic stainless steel is widely used in engineering fields because of its good ductility, but its relatively low yield strength...
-
Characterization and Kinetics of Chromium Carbide Coatings on AISI O2 Tool Steel Performed by Pack Cementation
Chromium carbide coatings were grown on AISI O2 cold work tool steel via pack cementation method at the temperature of 900, 1000, and 1100 °C for 4,...
-
Study of Wear Resistance of Mandrels upon Piercing Workpieces Made of Steel 20Kh13
AbstractThe results of an experimental study regarding the influence of the material and calibration of the piercing mill mandrel on its wear...
-
Analysis of Detrimental Inclusions in Steel and Aluminum
This chapter presents results on the analysis of nonmetallic as well as intermetallic inclusions within a metal matrix. In both, steel and aluminum... -
Influence of the Powdered metal High-Speed Steel Production on the Property Package
AbstractThe state of tool production in Russia is analyzed. The main producers and material grades used in the production of household tools are...
-
Microstructural Effects in Hydrogen Embrittlement of Steel
As a help to steel design, microstructural and compositional effects on hydrogen embrittlement are reviewed for typical steel types. Control of a... -
Fine Piercing of Amorphous Electrical Steel Sheet Stack Using Micro-/Nano-Textured Punch
The amorphous electrical steel sheets were expected to be used for motor cores because of their high strength and low iron loss even in high... -
Friction Stir Alloying AZ61 Magnesium Alloy and Mild Steel with Zn-CNT Additive
The study investigated the impact of adding a Zn-CNT additive during friction stir alloying (FSA) of AZ61 magnesium alloy and SPHC mild steel. The...
-
Deviation from Roundness of Cylindrical Parts from Steel 45 with Reversible SPD
AbstractThe results of experimental studies to determine the influence of the parameters of reverse surface plastic deformation (SPD) on the...
-
Precipitation and Evolutionary Behavior of Eutectic Carbides in Electroslag Remelted 7Cr13N Steel
The precipitationPrecipitation andTechnology evolutionary behavior of eutectic carbidesEutectic carbides in 7Cr13N steelSteel were investigated and...