Search
Search Results
-
Improved Electrochemical Performance of Al2O3-Coated @ K and Cl Dual-Doped LiNi0.5Co0.2Mn0.3O2 Cathode Materials at High Cut-Off Voltage
The irreversible phase transition of LiNi 0.5 Co 0.2 Mn 0.3 O 2 (NCM523) cathode materials easily occurs in high voltage (> 4.5 V) charging processes, which...
-
RETRACTED ARTICLE: Minimization of Surface Roughness and Residual Stress in Grinding Operations of Inconel 718
The residual stress and surface roughness enhancement of ground surfaces can decrease the lifetime of workpiece by reducing its fatigue life. It is...
-
Shear Forging for Aluminum and Copper Materials
The features of shear forging for a pure aluminum A1100, aluminum alloy A5052 and pure copper C1100 were investigated using the simulations and... -
Forming Analysis on the Effect of Ultra-Thinning of Sheet Metals Based on a Stress Rate Direction-Dependent Constitutive Model
In formability evaluation, it is important to accurately predict the onset timing and morphology of fracture in a workpiece from a physical point of... -
Performance Optimization of Ti-6Al-4V Milling Process Using Sustainable Cooling Approach and Application of Rao Algorithms
Titanium alloy is the most promising superalloy widely used in avionics systems, because of its high strength and great corrosion resistance....
-
On the Formation of an Anti-Reflection Layer on the Surface of Single-Crystal Silicon by Ion-Beam Etching
AbstractA technique is proposed for the formation of a developed regular structure on the surface of a polished single-crystal silicon wafer by...
-
Influence of Guillotine Clearance on Cut-Edge Damage to Nonoriented Electrical Steel
Nonoriented electrical steel of 0.65 mm thickness was sheared to investigate the influence of guillotine clearance on cut-edge damage. The result...
-
Effect of Cutting Speeds on Wear Performance of 22MnB5 Boron Steel When Machining with Al 6061 Aluminum Alloy
22MnB5 boron steel is a new material with a high hardness that is classified as Ultra High Strength Steel. The goal of this paper was to characterize... -
Growth and characterization of organic 2,2′,4,4′-tetrahydroxybenzophenone single crystals for nonlinear optical applications
The organic 2,2′,4,4′-tetrahydroxybenzophenone single crystal was grown by slow evaporation solution growth technique. The single crystal X-ray...
-
Influence of Surface Morphology on Fatigue and Tribological Behavior of TRIP/TWIP Steels
Opposite to widely used austenitic stainless steels (see Chapter “Influence of Manufacturing and Load Conditions on the Phase Transformation and... -
Study on Selecting the Appropriate Process Parameters When CNC Cylindrical Grinding Heat-Treated Alloy Steel
The grinding method is often used for finishing parts made of materials with high mechanical strength and hardness. When manufacturing parts with... -
Influence of Iron Contamination on the Cutting Force of A356-T6 Alloys Used in Cylindrical Turning
A356 alloy is widely used in the automotive industry for applications such as cylinder heads, engine blocks and other components. Iron contamination...
-
Modified JAYA Algorithm for Machinability Assessment and Conflicting Response Optimization During Milling of Nanostructured Carbon Onions Reinforced Epoxy Composites
Polymer composites are extensively accepted in the material fraternity due to their lightweight, high-strength quality. The carbon nanomaterials...
-
Fabrication of Periodic Textures at Micron Level on Silicone Membrane Using Femtosecond Laser
MembranesMembrane in microfluidics have several uses, including separation/filtration such as particle separation, solute separation, and reverse... -
Investigation on Experimental Machinability & 3D Finite Element Turning Simulations of Al–4.5%Cu/TiB2/3p Composite
Present investigation examines the turning process of Al–4.5%Cu/TiB 2 /3p MMC composite on a HMT lathe machine. An attempt has been made to explore the...
-
Parameter Design of Abrasive Waterjet Machining Process for Machining Al6061/SiC MMC Using Taguchi—Simulated Annealing Algorithm (T-SAA)
Abrasive waterjet machining (AWJM) is a widely used eco-friendly subtractive manufacturing process for producing a smooth cut surface without... -
The Relationship Between the Extent of Indentation and Impact Damage in Carbon-Fibre Reinforced-Plastic Composites after a Low-Velocity Impact
The present paper investigates the low-velocity impact behaviour of carbon-fibre reinforced-plastic (CFRP) composite panels and the damage incurred...
-
An investigation of different parameters on the penetration depth and welding width of Ti-6Al-4V alloy by plasma arc welding
In this paper, the effect of plasma arc welding (PAW) process parameters on the mechanical properties and macro- and microstructure of Ti-6Al-4V...
-
Linear and nonlinear optical characteristics of PbMoO4 single crystal for optoelectronic applications
In the present paper, we studied linear and nonlinear optical properties of lead molybdate (PbMoO 4 ) single crystals grown by Czochralski method....
-
Growth and characterization of organic 4-chloroaniline single crystals for nonlinear optical applications
The organic 4-chloroaniline single crystal was grown by the slow evaporation solution growth technique using acetone solvent. The structure and the...