Search

Search Results

1. Significantly Enhanced Strength of a Drawn Twinning-Induced Plasticity Steel Wire and its Deformation Twinning Dependency

   This study describes a higher strength of drawn twinning-induced plasticity (TWIP) steel wire compared with its strain hardening exponent ( n ) and...

   Joong-Ki Hwang in Journal of Materials Engineering and Performance

   Article 27 June 2022
   

2. Dislocation-mediated and twinning-induced plasticity of CoCrFeMnNi in varying tribological loading scenarios

   Coarse-grained, metallic materials undergo microstructure refinement during tribological loading. This in turn results in changing tribological...

   Antje Dollmann, Alexander Kauffmann, ... Christian Greiner in Journal of Materials Science

   Article Open access 14 September 2022
   

3. A Feasible Thermomechanical Process of a Duplex-Phase Fe–Mn–Al–C Steel for Significantly Increasing Ductility Without Loss of Strength

   The controlled thermomechanical treatment was conducted for the mechanical property improvement of Fe–Mn–Al–C duplex low-density steels. The tensile...

   Y. Wang, P. Chen, ... X. W. Li in Metallurgical and Materials Transactions A

   Article 01 March 2024
   

4. Influence of sample preparation on nanoindentation results of twinning-induced plasticity steel

   Nanoindentation is an attractive characterization technique, as it not only measures the local properties of a material but also facilitates...

   Jiali Zhang, Stefan Zaefferer in International Journal of Minerals, Metallurgy and Materials

   Article 06 May 2021

5. Simultaneous Twinning and Microband-Induced Plasticity of a Compositionally Complex Alloy with Interstitial Carbon at Cryogenic Temperatures

   Intermediate to low stacking fault energy (SFE) high entropy alloys (HEA) have shown an excellent combination of strength and ductility as a result...

   A. S. Tirunilai, R. Osmundsen, ... A. Kauffmann in High Entropy Alloys & Materials

   Article Open access 14 June 2022
   

6. Effect of Aging on Structure and Properties of a Transformation-Induced Plasticity-Aided High-Manganese Steel

   This paper reports the results of investigation on 0.1C-17Mn-5.5Ni-1.8Al-2.7W-4.6Mo-2.3Cu-0.002B steel designed to assume excellent combination of...

   Mukesh Kr. Chowrasia, Akshay Kumar, ... U. Pandel in Journal of Materials Engineering and Performance

   Article 16 January 2020
   

7. Martensite Reversion Duality Behavior in a Cold-Rolled High Mn Transformation-Induced Plasticity Steel

   The martensite reversion behavior of a cold-rolled high Mn transformation-induced plasticity (TRIP) steel was investigated through an elaborate...

   P. Dastur, A. Zarei-Hanzaki, ... J. Mola in Metallurgical and Materials Transactions A

   Article 16 August 2019
   

8. Warm V-Bending and Hydrogen Embrittlement Properties of Ultrahigh-Strength TRIP-Aided Bainitic Ferrite Steel Sheets

   The warm V-bending and hydrogen embrittlement properties of the ultrahigh-strength transformation-induced plasticity (TRIP)-aided bainitic ferrite...

   Akihiko Nagasaka, Tomohiko Hojo, ... Chihaya Tabata in Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

   Conference paper 2024
   

9. Structural mechanisms of enhanced mechanical properties in amorphous–nanocrystalline ZrCu alloys under irradiation

   This study investigates the tensile deformation behavior of irradiated ZrCu amorphous–nanocrystalline (ANA) alloy with a view to capturing essential...

   Zong-yuan Gan, Peng-wei Wang, ... Liang Yang in Journal of Materials Science

   Article 08 March 2023
   

10. Texture Evolution During Hot Compression of CoCuFeMnNi Complex Concentrated Alloy Using Neutron Diffraction and Crystal Plasticity Simulations

    CoCuFeMnNi complex concentrated alloy was subjected to hot compression at different temperatures and strain rates. Texture evolution for four...

    Reshma Sonkusare, Krishanu Biswas, ... N. P. Gurao in Transactions of the Indian Institute of Metals

    Article 27 July 2022
    

11. Medium Mn Dual-Phase Nanotwinned Steel

    The nanotwinned alloys produced during the previous decades are generally single-phased. Here we propose a nanotwinned steel with dual-phase...

    X. K. Shang, Q. W. Guan, B. B. He in Metallurgical and Materials Transactions A

    Article 23 July 2022
    

12. Dynamic Tensile Behavior of Fiber Laser Welds of Medium Manganese Transformation-Induced Plasticity Steel

    During a crash situation, tailor-welded blanks (TWBs) are subjected to local high strain rate (HSR) deformations. Hence, understanding the effects of...

    M. H. Razmpoosh, E. Biro, ... Y. Zhou in Metallurgical and Materials Transactions A

    Article 23 May 2019
    

13. Mechanical Stability of Retained Austenite and Texture Evolution in Additively Manufactured Stainless Steel

    We employed two additive manufacturing (AM) strategies perpendicular to each other in AM stainless steel. In contrast to the vertically-built...

    Hobyung Chae, E-Wen Huang, ... Soo Yeol Lee in Metals and Materials International

    Article 08 December 2023
    

14. Nanomechanical Characterization of Metallic Materials

    Mechanical behavior of metallic materials on nanoscale is characterized by using Nanoindentation and Transmission Electron Microscope (TEM) to...

    Takahito Ohmura in The Plaston Concept

    Chapter Open access 2022
    

15. Functional Fatigue of NiTi Shape Memory Alloy: Effect of Loading Frequency and Source of Residual Strains

    Due to latent heat release and the consequent thermomechanical coupling, NiTi SMAs are highly rate sensitive. In this study, the effect of loading...

    R. Sidharth, A. S. K. Mohammed, H. Sehitoglu in Shape Memory and Superelasticity

    Article 16 November 2022
    

16. Effect of Warm Rolling on the Structure and Tensile Properties of a Metastable Fe-Based Medium Entropy Alloy

    The present study investigates the impact of warm rolling on the microstructure and tensile properties of Fe ₆₀ (CoNi) ₃₀ Cr ₁₀ Fe-based medium entropy...

    Hyo** Park, Jungwan Lee, ... Hyoung Seop Kim in Metals and Materials International

    Article 16 September 2023
    

17. Linear friction welding of equiaxed Ti17 titanium alloy: Effects of microstructure evolution on tensile and impact properties

    Linear friction welding of equiaxed Ti17 titanium alloy with great strength–plasticity matching was carried out in this study and the microstructure...

    Zhenguo Guo, Tiejun Ma, ... Achilles Vairis in Journal of Materials Science

    Article 16 June 2023
    

18. Effect of Cyclic Quenching on the Austenite Stability and Work Hardening Behavior of Medium-Mn Quenching and Partitioning Steel Enabled by Intercritical Annealing

    Abstract

    This paper investigates the effect of cyclic heating quenching pretreatment on the structural evolution and mechanical properties of...

    L. Liu, B. R. Shan, ... J. R. Zhao in Physics of Metals and Metallography

    Article 01 December 2022
    

19. Effect of First-Step Temperature and Time on the Microstructure and Mechanical Properties of the Two-Step Cu-Alloyed ADI

    In this study, Cu-alloyed ductile cast iron treated by different first-step temperatures and times was investigated. The influence of the amount,...

    Yi Pengyue, Guo Erjun, ... Wang Changliang in International Journal of Metalcasting

    Article 06 December 2023
    

20. Experimental Observations on Thermo-Mechanically Coupled Cyclic Deformation and Fatigue Failure of NiTi SMAs

    In this chapter, the thermo-mechanically coupled cyclic deformation features of super-elastic and shape memory NiTi SMAs are experimentally...

    Guozheng Kang, Chao Yu, Qianhua Kan in Thermo-Mechanically Coupled Cyclic Deformation and Fatigue Failure of NiTi Shape Memory Alloys

    Chapter 2023