Search

Search Results

1. Microstructural Evolution of Co₃₅Cr₂₅Fe₃₀Ni₁₀ TRIP Complex Concentrated Alloy with the Addition of Minor Cu and Its Effect on Mechanical Properties

   The influences of minor Cu addition (2 and 4 at.%) on the microstructural evolution and room-temperature mechanical property of metastable Co ₃₅ Cr ₂₅ Fe _30...

   Haoyang Yu, Wei Fang, ... Fuxing Yin in Acta Metallurgica Sinica (English Letters)

   Article 02 February 2022
   

2. Microstructural Analysis of Cast and Heat-Treated Mg–3.2Ce–2Mn Alloy

   Abstract

   A distingtive eutectic structure with Mn particles observed in as-cast Mg–3.2Ce–2Mn (wt %) alloy was investigated in detail in the present...

   H. Sang, S. S. A. Shah, ... G. S. Song in Russian Journal of Non-Ferrous Metals

   Article 01 May 2021
   

3. Fatigue Fracture of Pie Channel Weld of Sinter Screen: A Metallurgical Insight

   Sintering is an agglomeration process to convert iron ore fines into a larger mass suitable to be charged directly into the blast furnaces. A screen...

   Kaushal Kishore, Manashi Adhikary, Anup Kumar in Journal of Failure Analysis and Prevention

   Article 10 October 2020
   

4. Carburization and Stress Profiles Characterized by High-Energy X-ray Diffraction in 316L Austenitic Stainless Steel After Exposure at 500 °C and 600 °C in Carburizing Liquid Sodium

   316L austenitic stainless steel was carburized in sodium containing a high-carbon activity at two different temperatures, 500 °C and 600 °C for...

   Mohamed Fares Slim, Guillaume Geandier, ... Benoit Malard in Oxidation of Metals

   Article 29 June 2021
   

5. Study on Microstructure-Property Relationship of Inconel 617 Alloy/304L SS Steel Dissimilar Welds Joint

   Welding of Inconel 617 (IN617) alloy and austenitic 304L SS steel has been attempted using the autogenous Laser Beam Welding (LBW) process....

   Amit Kumar, Krishna Guguloth, ... Chandan Pandey in Metallurgical and Materials Transactions A

   Article 18 July 2023
   

6. Inclusion Characteristics and Acicular Ferrite Formation in the Simulated Heat-Affected Zone of Ti-Zr-Killed Low-Carbon Steel

   In this paper, high temperature hot rolling and weld simulations were performed in Al-killed and Ti-Zr-killed steels. The microstructure and impact...

   Fangce Liu, Yue Bi, ... Guo Yuan in Metals and Materials International

   Article 06 July 2022
   

7. Effect of Heat on Organic and Inorganic Components in Some Non-coking Lower Gondwana Coals

   The concentration of different maceral groups and minerals in coal influence the quality as each of them behaves differently during heat treatment....

   Rajesh Bhatta, Nilima Dash, Bibhuranjan Nayak in Transactions of the Indian Institute of Metals

   Article 05 January 2021
   

8. Preparation, Structure, and Characterization of SFCA-I

   SFCA-ISFCA-I, which is the most ideal binder phase in ironIron ore sinteringSintering, was prepared via a solid-state reaction with analytical...

   Yongda Li, Junjie Zeng, ... Xuewei Lv in TMS 2024 153rd Annual Meeting & Exhibition Supplemental Proceedings

   Conference paper 2024
   

9. Experimental Study of Leachability of Amorphous PbO-CuO-CaO-FeO-MgO-SiO2 Slag: Methodology Development and Initial Results

   There is a lot of potential in reusing metallurgical slag in geotechnical applications, with the primary concern for it is the susceptibility to...

   Igor Babaian, Siyu Cheng, ... Evgueni Jak in Proceedings of the 62nd Conference of Metallurgists, COM 2023

   Conference paper 2023
   

10. Phase Stability and Deformation Modes in Functionally Graded Metastable Austenitic Stainless Steel; A Novel Approach to Evaluate the Role of Nitrogen

    An austenitic stainless steel AISI 304 plate was functionally graded by interstitial alloying with nitrogen by high-temperature solution nitriding,...

    Bo Wang, Konstantin V. Werner, ... Marcel A. J. Somers in Metallurgical and Materials Transactions A

    Article 11 December 2022
    

11. The Effect of Diffusion Annealing of Nb₃Sn-Based Superconductors with Internal Tin Sources on the Conductivity of Stabilizing Copper

    Abstract

    To create the windings of the magnetic system of the Future Circular Collider, it is necessary to modernize the Nb ₃ Sn-based composite...

    D. S. Novosilova, M. V. Polikarpova, ... M. V. Alekseev in Physics of Metals and Metallography

    Article 01 January 2021
    

12. Measuring and Modeling Microsegregation in High-Pressure Die Cast Mg–Al Alloys

    This work provides a quantitative description of the microstructure and microsegregation behavior of high-pressure die-cast (HPDC) Mg–Al and Mg–Al–Mn...

    Tracy D. Berman, Zhenjie Yao, ... John E. Allison in Metallurgical and Materials Transactions A

    Article 07 May 2022
    

13. Effect of cooling rate on segregation characteristics of 254SMO super austenitic stainless steel and pitting corrosion resistance under simulated flue gas desulfurization environment

    The segregation behavior and pitting corrosion resistance under simulated flue gas desulfurization (FGD) environment of 254SMO super austenitic...

    Yunong Li, Dening Zou, ... Wei Zhang in Journal of Materials Science

    Article 18 February 2023
    

14. Refurbishment of Continuous Caster Rolls by Laser Cladded Fe-Cr-Ni-Mo-Co Alloy

    Laser cladded low carbon 12Cr-5Ni-3Mo-5Co-based Fe powder system has been implemented to improve the performance of the vertical section rolls....

    Nachiketa Yadav, Kumar Harsh, ... Debalay Chakrabarti in Journal of Materials Engineering and Performance

    Article 05 June 2023
    

15. Electron Probe Microanalysis

    When an accelerated electron strikes a substance, it sometimes ejects the inner shell electron of the atom existing in the substance and creates a...

    Hiroshi Sakamae in Compendium of Surface and Interface Analysis

    Chapter 2018
    

16. Temperature Gradient Induced Orientation Change of Bi Grains in Sn–Bi57–Ag0.7 Solder Joint

    Sn-Bi- X solders are widely used in electronic packaging industry. However, thermomigration (TM) behaviors of Sn-Bi- X solder joints and the...

    Yinbo Chen, Zhaoqing Gao, Zhi-Quan Liu in Acta Metallurgica Sinica (English Letters)

    Article 06 January 2022
    

17. Directional Solidification of a Nickel-Based Superalloy Product Structure Fabricated on Stainless Steel Substrate by Electron Beam Additive Manufacturing

    This article is the first to apply wire-feed electron beam additive manufacturing in vacuum to fabricate a part from a complex nickel-based...

    S. V. Fortuna, D. A. Gurianov, ... E. A.  Kolubaev in Metallurgical and Materials Transactions A

    Article 04 January 2021
    

18. Hydrogen Trap** by Nanoscale Fe₄C in MS1500 Advanced High Strength Steel

    The effect of hydrogen in advanced high strength steels can lead to a reduction in mechanical properties, a phenomenon known as hydrogen...

    M. Y. Rekha, I. Bikmukhametov, ... G. B. Thompson in Journal of Materials Engineering and Performance

    Article 20 December 2023
    

19. Exfoliation of an extruded Mg-4Li-1Ca alloy in presence of glucose and bovine serum albumin

    Exfoliation corrosion (EFC) on extruded Mg-4Li-1Ca alloys as bone implant materials has not been reported. This study aimed to elucidate the...

    Lei Cai, Mei-Qi Zeng, ... Rong-Chang Zeng in npj Materials Degradation

    Article Open access 17 January 2024
    

20. Extraction of Vanadium From Vanadium Slag Through a New Technique Route Including Na₂O₂-Briquetting Roasting Process

    The material accumulation during roasting in the practical production causes the hypoxia of the internal materials, leading to the relatively lower...

    Hong-Rui Yue, Jian-**ng Liu, ... Wei-Jun Zhang in Metallurgical and Materials Transactions B

    Article 20 April 2022