Search
Search Results
-
Recent trends in coating processes on various AISI steel substrates: A review
Various spraying techniques have been used to apply engineered coatings on different industrial parts and components. Enhancing the properties of...
-
A high-yield and size-controlled production of graphene by optimizing fluid forces
Efficient graphene production is critical for commercial applications. Liquid-phase exfoliation, one of the most promising methods for mass...
-
Detection of Cavitation Phenomenon within a Centrifugal Pump Based on Vibration Analysis Technique in both Time and Frequency Domains
Cavitation is an important problem that occurs in any pump and contributes highly towards the deterioration in the performance of the pump. In...
-
Comparative study of mechanical, corrosion and erosion—corrosion properties of cast hyper-duplex and super-duplex stainless steels
Duplex stainless steels (DSSs) used in subsea structures and desalination industries require high corrosion and erosion resistance as well as...
-
Characterization of (AlCrTiVZr)N High-Entropy Coating Produced by Cathodic Arc Evaporation
High-entropy alloy nitride (HEN) coating of (AlCrTiVZr)N was deposited onto 17-4PH stainless steel substrates using the cathodic arc evaporation...
-
Erosion–corrosion behavior of SAF3207 hyper-duplex stainless steel
Polarization curves and mass losses of SAF3207 hyper-duplex stainless steel under various conditions were measured. The damaged surfaces after...
-
Multifunctional hybrid sol-gel coatings for Marine Renewable Energy Applications: Synthesis, Characterization and Comparative Analysis with Organically Modified Silicon Precursor Coatings
Hybrid coatings for cavitation erosion protection of aluminum alloys, have been developed, based on a sol-gel process and applied by the dip coating...
-
Investigation of Single-Particle Erosion Behavior of Electroless Ni-P-Ti Composite Coatings
Electroless Ni-P-Ti composite coatings were deposited on AISI 1018 steel substrates by incorporating Ti nanoparticles into a Ni-P matrix. It was then...
-
A Study of Flow Pattern and Sedimentation in Hydraulic Physical Model
Sustainability of hydroelectric dams has been questioned due to the sedimentation, erosion and vortex formation at the dams. This study had assessed... -
Cohesion of Dissimilar Splats in Hybrid Plasma-Sprayed Coatings: A Case Study for Al2O3-TiO2
Hybrid plasma spraying combines deposition of coarse dry powders and liquids, i.e., suspensions or solutions, thus expanding range of microstructures...
-
Selecting the Appropriate Filler Metal to Join HSLA-100 Steel by Gas Tungsten Arc Welding Process
In the present research, the welding of HSLA-100 steel was performed using ER100S-G, ER120S-G, and ER2209 filler rods via the gas tungsten arc...
-
Failures Investigation of Marine Propellers in Corrosive Environments
Marine corrosion failure of fishing boat propellers made of cast Nickel Aluminium Bronze were investigated. Specimens extracted from the corroded... -
Review of ultrasonic-assisted soldering in Sn-based solder alloys
Sn-based lead-free solder has been widely applied in areas like electronic packaging due to its excellent solderability. The composite solders can be...
-
Microstructural and mechanical properties of pressureless sintered high-wear-resistant SiC composite materials
The microstructural and mechanical properties of pressuless sintered SiC-based composite materials with Al or Cu addition (0–10 wt.%) were studied....
-
Influence of Various Kinds of Ultrasonic Treatment on Surface Geometry
AbstractThis study considers the main methods of surface pretreatment before applying functional coatings, determines advanced methods of their...
-
Failure Analysis of Once-Through Steam Generator (OTSG) External Pi** Welds
Once-through steam generator external pi** has experienced unexpected severe degradation at welds near a bend. Failure analysis has been conducted...
-
Mechanisms of the Origin of Fine and Non-Dendritic Grains at the Sonotrode–Liquid Metal Interface During Ultrasonic Solidification of Metals
Proposed grain refinement mechanisms during ultrasonic solidification have been explained in terms of refinement between cavitation enhanced...
-
Some Thoughts on Modeling Abrasion-Corrosion: Wear by Hard Particles in Corrosive Environments
Wear by hard particles can involve abrasion or erosion and is one of the most severe forms of wear. When a corrosive environment is present, the...
-
A review of biomaterial degradation assessment approaches employed in the biomedical field
The biological response to biomaterials plays a crucial role in selecting suitable materials for the formulation and development of tissue...
-
Investigations on Slurry Erosive on Wear Performance of HVOF-Sprayed Cr2O3 Coatings on Aluminum Alloy
The slurry erosion behavior of thermally sprayed Cr 2 O 3 coatings on Aluminium alloy is evaluated in the current research. By employing a high-velocity...