Search
Search Results
-
Impression creep behavior of different zones in friction stir welded Mg–Zn–Mn wrought alloy
The friction stir welded joint of wrought ZM21 alloy was divided into five parts, and their localized creep behavior was studied via the impression...
-
Investigating Effect of ECAP Process on Corrosion Behavior of WE43 Magnesium Alloy in Simulated Body Fluid
Corrosion of WE43 magnesium alloys after equal-channel angular pressing (ECAP) process with one pass (1P), two pass (2P), three pass (3P) and four...
-
High-Speed Impact Behavior of an AZ91D Magnesium Alloy Casting at Various Deformation Temperatures
At 298 K and 523 K, strain rates (SRs) ranging from 1000 s −1 to 2800 s −1 were used to conduct high-speed impact tests on the cast AZ91D Mg alloy. The...
-
Microstructural Evolution and Anisotropic Weakening Mechanism of ZK60 Magnesium Alloy Processed by Isothermal Repetitive Upsetting Extrusion
The isothermal repetitive upsetting extrusion (RUE) was implemented to process ZK60 magnesium alloy at 380 °C. Then, the relationship between the...
-
Influence of Pin Profile on Mechanical, Microstructure and Texture Characteristics of Friction Stir Welded Elektron 21 Alloy
Elektron 21 is a magnesium-rare earth (Mg R.E) alloy developed mainly for high-performance applications like automobiles, aerospace, etc. One of the...
-
Improvement of Yield Asymmetry and Enhancement of Mechanical Properties of Extruded AZ110 Alloy with La-Rich Misch Metal Addition
In this paper, effects of the La-rich MM (Misch Metal) on the microstructure, texture and mechanical properties of extruded AZ110 alloy during...
-
Bioceramic Coating Produced on AZ80 Magnesium Alloy by One-Step Microarc Oxidation Process
A self-sealing bioceramic coating was prepared on AZ80 magnesium alloy by one-step microarc oxidation (MAO) in an alkaline silicate solution in the...
-
Effect of Ca Addition on Microstructure of AZ61 Magnesium Alloy During High-Temperature Deformation
Magnesium and its alloys have been restricted to wide adoption in the industrial field because of low formability due to lack of slip system on room...
-
Relationship Between Work Hardening Capacity and Compressive Creep Behavior in a Hot-Extruded Mg–6Al–1Zn Alloy Rod
This work investigated the compressive creep behavior of a hot-extruded Mg–6Al–1Zn alloy rod in relation to its work hardening capacity. The dense {
... 
-
Tensile and High-Cycle Fatigue Properties of Extruded AZ91–0.3Ca–0.2Y Alloy with Excellent Corrosion and Ignition Resistances
Mg–Al–Zn–Ca–Y (SEN) alloys have been recently developed by adding small amounts of Ca and Y to commercial Mg–Al–Zn (AZ series) alloys. These alloys...
-
Effect of carbonate additive on the microstructure and corrosion resistance of plasma electrolytic oxidation coating on Mg-9Li-3Al alloy
Carbonate was added to the silicate system electrolyte to improve the corrosion resistance of the plasma electrolytic oxidation coating on Mg-9Li-3Al...
-
Evolutions of Electromagnetic Fields and Forced Flow Driven by the Pulse Length of a Pulsed Magnetic Field and Their Relevance to the Grain Refinement of a Solidified Al–Si Hypoeutectic Alloy
AbstractA pulsed magnetic field (PMF) can cause significant grain refinement in solidified alloys. However, the evolution of forced flow and grain...
-
Effect of extrusion process on microstructure and mechanical and corrosion properties of biodegradable Mg−5Zn−1.5Y magnesium alloy
The effect of extrusion temperature and ratio on the microstructure, hardness, compression, and corrosion behavior of Mg−5Zn−1.5Y alloy were analyzed...
-
Insights on Anti-corrosion Coating of Magnesium Alloy: A Review
Demand for magnesium alloys in aerospace, bio-medical, and automotive applications are high due to their superior properties such as low-density cum...
-
Microstructure Evolution and Dynamic Recrystallization Model of Extruded AZ41M Magnesium Alloy During Hot Deformation
The hot deformation behavior of extruded AZ41M magnesium alloy at strain rate of 0.005–1 s −1 and temperature of 300–450 °C was studied through...
-
Preparation and property of self-sealed plasma electrolytic oxide coating on magnesium alloy
Plasma electrochemical oxidation (PEO) is a surface modification technology to form ceramic coatings on magnesium alloys. However, its application is...
-
Numerical Simulation of Micro Forming of Bio-Absorbable AZ80 Magnesium Alloy
The characteristics of grains during the micro formingForming process are unpredictable. It reflects in the material behavior, interfacial friction...
-
Twinning Behavior in Wrought Magnesium Alloys and its Connection with Texture, Precipitates and Mechanical Properties
Twinning is an important mechanism for coordinated plastic deformation of magnesium alloys. Pre-setting {10–12} extension twins into magnesium alloy...
-
Combining the 8-hydroxyquinoline intercalated layered double hydroxide film and sol—gel coating for active corrosion protection of the magnesium alloy
8-hydroxyquinoline (8-HQ) intercalated layered double hydroxides (LDH) film as underlayer and sol—gel layer was combined for active corrosion...
-
Effects of Aging Treatment on The High-Temperature Mechanical Behavior of Laser-Welded High-Strength Mg-Gd-Y Alloy
The effects of aging treatment on the high temperature mechanical behavior of laser-welded Mg-Gd-Y alloy were systematically studied. The...
