Search
Search Results
-
Investigation of Effect of the Rheological Parameters on the Flow Behavior of ADC12 Al Alloy in Rheo-Pressure Die-casting
In this study, the various rheological behaviors such as shear rate, viscosity, and shear stress of semi-solid slurry of ADC12 Al alloy are...
-
Real-Time Thermal Tracking Model With Consideration of Dynamic Thermophysical Properties Loading in the Process of Steel Continuous Casting
The accurate online determination of the solidification of continuously cast strands is the primary condition for the effective implementation of...
-
Automated pipeline for superalloy data by text mining
Data provides a foundation for machine learning, which has accelerated data-driven materials design. The scientific literature contains a large...
-
Residual Stress Formation and Distortion in Austenitic AISI304 Steel Pipe Weldment with Consideration of Latent Heat using Novel Prescribed Weld Temperature
The utilization of Austenitic AISI304/SUS304/SS304 has become prevalent in the fabrication of superheaters and re-heaters tubes within advanced...
-
The Effect of Bonding Temperature on the Microstructural and Mechanical Properties of Transient Liquid Phase Bonded Commercially Pure Ti Joint
Commercially pure Ti (AMS 4902) was joined using the transient liquid phase bonding technique. The joining process was implemented at various...
-
Solidification Characteristics of Ex situ Particulate-Reinforced Aluminum Matrix Composites
This work aimed to elucidate and compare the solidification characteristics of A356.2, A356.2/5% SiC, A356.2/5% Al 2 O 3 , and A356.2/5% ZrO 2 metal...
-
Phase Transformation Temperatures, γ–γ′ Lattice Parameter Misfit, and γ′ Precipitate Morphology in Co–Ti–V Alloys
In the context of develo** tungsten free cobalt alloys, the physical metallurgical properties of γ ′ precipitate strengthened Co–Ti–V alloys were...
-
Effect of Welding Parameters on Mechanical Performance and Microstructural Characterization of Fiber Laser Oscillation Welded Dissimilar TWIP/304L Steel Joints
A dissimilar TWIP/304L joint was produced using oscillation fiber laser welding with welding speeds of 80 mm/s and 120 mm/s, as well as different...
-
On the Role of Oxygen in Phase Formation Involving Oxides of the Bam + nBimOy (m = 1–10; n = 0–5, 7–9, 11, 13, 17) Homologous Series
Abstract —The role of oxygen in the synthesis and phase formation of perovskite-like oxides of the homologous series Ba m + n Bi m O y ( m = 1–10; n = 0–5,...
-
Thermodynamic modeling of Al–Si nanoalloy phase diagram
Due to large surface to volume ratio, phase transformation of materials at nanoscale occurs at lower temperatures compared to bulk materials. The...
-
Thermodynamic Calculations of Precipitate Phases in FeCr17Mn11Mo3Nx Powder Based on JMatPro
High-nitrogenNitrogen stainless steelStainless steel exhibits remarkable toughnessToughness and corrosionCorrosion resistance, which can make it...
-
Experimental Investigation and Thermodynamic Description of the Co–Mo–Nb System
38 equilibrated alloys and 36 as-cast alloys were studied in this work. The microstructures of the alloys were characterized by Scanning Electron...
-
Hot Tearing of Fe-18Mn-0.6C-2.6Al High Manganese Steel
Fe-Mn-C-Al high manganese steel has a large tendency to hot tearing, making it difficult to continuously cast and even leading to steel leakage...
-
Effect of Sb and Ag additions on the melting and solidification of Sn-Bi solder alloys
Low temperature solders based on tin-bismuth (Sn-Bi) are used as substitutes for tin-silver-copper (Sn-Ag-Cu, SAC) alloys, reducing warpage-induced...
-
DSC Thermal Analysis of a Near Eutectic Al-Ce Alloy with Additions of Ni and Mn
Rare earth (RE) element mining is typically done to extract neodymium, praseodymium, dysprosium, and samarium. These RE elements are considered...
-
Investigation of the Effect of Cerium on the Structure and Properties of Calcium-Containing Aluminum Alloys
A new Al–Ca–Ce alloy system is investigated which is the basis for creating “natural composites” based upon aluminum. With the help of thermodynamic...
-
Multiscale Simulation and Experimental Study of Metal Flow Behaviors in 3D Orthogonal Woven Fabric/Al Composites During Liquid Infiltration Process
In this paper, a novel aluminum matrix composites reinforced with 3D orthogonal woven fabric/ Al composite (3DOW/Al) is fabricated by gas pressure...
-
Effect of Casting Variables on Mechanical Properties of Direct Chill Cast Aluminium Alloy Billets
MicrostructureMicrostructure of DC cast 6000 series Aluminium alloyAluminium alloys billets developed during castingCasting and...
-
The Co–Ni–Zr Phase Diagram in the Zr–ZrCo–ZrNi Region I. Phase Equilibria in the Zr–ZrCo–ZrNi System at Subsolidus Temperature, 900°C, and 800°C
The phase equilibria in the Zr–ZrCo–ZrNi system at subsolidus temperature and at 900 and 800°C were first studied using physicochemical analysis...
-
Strength-enhanced Sn–In low-temperature alloy with surface-modified ZrO2 nanoparticle addition
Low-temperature packaging is essential for the widespread use of flexible electronic devices, and Sn–In eutectic alloys have attracted considerable...
