Search

Search Results

1. Milling/Trimming of Carbon Fiber Reinforced Polymers (CFRP): Recent Advances in Tool Geometrical Design

   Nowadays, Fiber Reinforced Polymers (FRP) materials namely carbon fiber-reinforced polymers (CFRPs) have been given such great attention by...

   S. A. Sundi, R. Izamshah, ... M. H. Hassan in Machining and Machinability of Fiber Reinforced Polymer Composites

   Chapter 2021
   

2. Experimental Investigation of Oblique Impact Behavior of Adhesively Bonded Composite Single-Lap Joints

   Determining the impact behavior of adhesive joints allows the designing of high-strength joints. Therefore, the dynamic behavior of adhesive joints...

   M. Gokhan Atahan, M. Kemal Apalak in Applied Composite Materials

   Article 22 February 2022
   

3. Process optimization of aluminum/steel resistance spot welding based on dynamic resistance analysis

   Because aluminum and steel have different characteristics, directly joining them one cannot obtain desired Al/steel welded joint. In order to improve...

   Kang Zhou, Gang Wang, ... Mikhail Ivanov in Journal of Materials Science

   Article 08 December 2023
   

4. Refill Friction Stir Spot Welding of Dissimilar AA6014 Al Alloy and Carbon-Fiber-Reinforced Polymer Composite

   Abstract

   Both Al and carbon-fiber-reinforced polymer (CFRP) are being investigated as lightweight materials for automobile applications. To form...

   Andrews Nsiah Ashong, Mokyoung Lee, ... Jeoung Han Kim in Metals and Materials International

   Article 27 July 2020
   

5. Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips

   The near-surface segregationSegregation is a characteristic defect of twin-roll cast strips. Intergranular intrusions and bleeds rolled into the...

   Olexandr Grydin, Mykhailo Stolbchenko, Mirko Schaper in Light Metals 2020

   Conference paper 2020
   

6. Influence of Laser Power on Grain Size and Tensile Strength of 5A90 Al–Li Alloy T-joint Fabricated by Dual Laser-Beam Bilateral Synchronous Welding

   Abstract

   Dual laser-beam bilateral synchronous welding is introduced to produce the 2.5 mm thick 5A90 Al–Li alloy T-joint. The grain morphology and...

   Shuai Chen, **aohong Zhan, ... Dongtao Liu in Metals and Materials International

   Article 16 November 2019
   

7. Study on Intermetallic Compound (IMC) in dissimilar joining of steel and aluminum (Fe-Al) – a review paper

   Dissimilar metal joints, particularly those involving aluminum and iron (Al–Fe), are widely employed in engineering due to their exceptional...

   Syahril Azli Abdul Rahman, Sarizam Mamat, ... Manabu Tanaka in Welding in the World

   Article 24 June 2024
   

8. Effects of welding parameters on micro-junction structure and fracture behavior of refill friction stir spot welded joints for 2060 aluminum alloys

   Due to different filling modes of the material in sleeve-affected zone (SAZ), probe-affected zone (PAZ), and thermo-mechanically affected zone...

   Yue Wang, Peng Chai in Welding in the World

   Article 22 August 2020
   

9. Formation of micro-mechanical interlocking sites by nanoscale sculpturing for composites or hybrid materials with stainless steel

   The demands of modern materials are highly challenging as well as partially contradictory. For example, materials should be strong like steels but...

   Chima Obobi Kalu, Mathias Hoppe, ... Rainer Adelung in Journal of Materials Research

   Article 01 November 2020
   

10. Mechanical and Microstructural Behavior of Dissimilar AA2014-T6 and AA7075-T6 Aluminium Alloys Joined by Friction Stir Welding

    The present work aims to investigate the mechanical and microstructural properties of dissimilar welding of 2014-T6 and 7075-T6 aluminiumAluminium...

    Mohammad Adil, Jyoti Mukhopadhyay in Light Metals 2020

    Conference paper 2020
    

11. Investigation of Microstructure, Mechanical Properties, and Numerical Modeling of Ti6Al4V Joints Produced by Friction Stir Spot Welding

    In this work, lap-joined titanium alloy sheets have been successfully spot welded using friction stir spot welding (FSSW). Fully consolidated spot...

    F. A. García-Castillo, Luis A. Reyes, ... P. Zambrano-Robledo in Journal of Materials Engineering and Performance

    Article 18 June 2020
    

12. Corrosion Prevention and Control During Manufacturing

    Corrosion refers to the phenomenon that the material and the environmental medium undergo chemical, electrochemical, or physical effects, resulting...

    Zhigang Fang, **gyi Cao, Yong Guan in Corrosion Control Technologies for Aluminum Alloy Vessel

    Chapter 2020
    

13. Fatigue Performance and Strength Assessment of AA2024 Alloy Friction Stir Lap Welds

    This work experimentally studied the weld-seam cross section characteristics and the fatigue performance of AA2024 aluminum alloy friction stir...

    Ruijie Wang, Hong-Tae Kang, **nghai Lei in Journal of Materials Engineering and Performance

    Article 30 September 2020
    

14. Current status and development of external energy-assisted friction stir welding processes: a review

    This paper summarizes the status of various external energy-assisted friction stir welding techniques developed till date. Preheating the workpiece...

    Ranamay Saha, Pankaj Biswas in Welding in the World

    Article 09 January 2022
    

15. Perspective of Nanomaterials in the Performance of Solar Cells

    Solar cells have a great promise to solve the world energy crises in a sustainable way. In recent years, numerous efforts have been devoted on...

    Hafiz Muhammad Asif Javed, Wenxiu Que, ... S. K. Sharma in Solar Cells

    Chapter 2020
    

16. Materials for Indian Space Program: An Overview

    Materials are the backbone of any engineering structure and aerospace materials technologies are therefore closely guarded, in view of their dual...

    S. V. S. Narayana Murty, S. C. Sharma in Journal of the Indian Institute of Science

    Article 01 January 2022
    

17. A New Design for Friction Stir Spot Joining of Al Alloys and Carbon Fiber-Reinforced Composites

    Friction stir spot welding (FSSW) has been recently developed to join dissimilar materials. However, the traditional requirement for a rotating tool...

    Amir Bolouri, Mohamad Fotouhi, William Moseley in Journal of Materials Engineering and Performance

    Article Open access 03 August 2020
    

18. StressNet - Deep learning to predict stress with fracture propagation in brittle materials

    Catastrophic failure in brittle materials is often due to the rapid growth and coalescence of cracks aided by high internal stresses. Hence, accurate...

    Yinan Wang, Diane Oyen, ... **aowei Yue in npj Materials Degradation

    Article Open access 10 February 2021
    

19. Failure Analysis of Liner Plates of Wet Coke Quenching Car

    Quenching of coke after carbonization is an important step that influences its strength and reducibility in a blast furnace. During the wet coke...

    Kaushal Kishore, Goutam Mukhopadhyay in Journal of Failure Analysis and Prevention

    Article 10 June 2019
    

20. Evaluating the interfacial properties of wrinkled graphene fiber through single-fiber fragmentation tests

    Graphene fiber has attracted much attention due to its potential applications in supercapacitors, dye-sensitized solar cells, actuators, motors,...

    ** Qiu in Journal of Materials Science

    Article 23 September 2019