Search
Search Results
-
Investigating Machinability of Microalloyed Al-Cu Alloys by Simulation of Cutting Force
Due to unique combinations of properties, and mainly high specific strength, Al alloys are manifesting remarkable increase in strong lightweight...
-
Optimization of Machining Parameters During Milling of Carbon Fibre Reinforced Plastics (CFRP)
This paper investigates the optimization of cutting parameters on tool life of carbide cutting tools during milling Carbon Fibre Reinforced Plastic...
-
Performance Evaluation and Parametric Optimization of Turning Operation of Ti6Al-4V Alloy Under Dry and Minimum Quantity Lubrication Cutting Environments
Turning operation of Ti6Al-4V alloy using conventional lathe is challenging owing to high hardness, high strength to weight ratio of the work...
-
Nano and Sub-nano Scale Friction Behavior in Rotary Processing of 6H-SiC with Different Off-Axis Angles
The requirements for the surface quality of monocrystal SiC wafers as the representatives of third-generation semiconductors have been raised to a...
-
Estimation of Residual Stresses in Pipe-Ring Specimens by Incremental Hole Drilling and X-Ray Diffraction Method
Residual stresses are usually not considered in engineering calculations of components and structures, however, they are present more or less in most...
-
Numerical Analysis on Load Carrying Capacity of Castellated Beam by Varying Web Opening
Castellated Element is a structural element made from the structural steel I section which has been used as a structural beam as well as a column for...
-
Assessment of Local Defects on the Inner Surface of Gas Pipelines Transporting CO2-Containing Products
AbstractVisual inspection control of pitting defects on the manifold lugs cut out of the gas collection header was performed. This has made it...
-
Effect of Cryogenic Cooling on Micro-milling Properties of Titanium Alloy
Due to the micro-burrs and size effect often associated with titanium alloy micro-milling, the cutting quality is inevitably influenced. This paper...
-
Experimental Investigations and Surface Characteristics Analysis of Titanium Alloy Using Machine Learning Techniques
Milling difficult-to-machine metals like titanium alloys requires a precise surface finish at the nanoscale levels. This examines the surface...
-
Optimization of Process Parameter in High-Speed Milling AA6061 Using SVR and NSGA-II
Obtaining optimal machining conditions to increase machining efficiency in the milling process is a difficult mission. This paper presents an...
-
The Performance of Mechanically Refined Fused Alumina Abrasive Grits Compared to Diamond
The purpose of the current study is to distinguish the performance of mechanically refined abrasive grits and artificial diamonds in the fly milling...
-
Minimization of Milling-Induced Residual Stresses in AISI 1045 Steel: Process Optimization using Design of Experiments Taguchi Method
Residual stress is responsible for various engineering failures in cases where the magnitude of residual stress exceeds the ultimate strength. With...
-
Effect of High-Speed Dry Face Milling on Surface Integrity Characteristics of AZ91 Mg Alloy
In the present study, high-speed dry face milling is performed on AZ91 magnesium alloy using uncoated carbide inserts. The most influential surface...
-
The Manufacturing and Evaluation of the Cutting Performance of Metal Bonded cBN Grinding Wheel by Electroplating Process in the Surface Grinding of P18 Steel
This study presents a method of manufacturing the metal-bonded cBN grinding wheel by electroplating and the initial research results on the cutting...
-
Optimization of Submerged Nozzle and Chamfer Design in the Mold of Bloom Continuous Casting Process Using Numerical Simulation
Bloom continuous castingBloom continuous casting is widely used in steel production. The flow state and liquid level fluctuationLiquid level...
-
Neutronographic Residual Stress Analysis for Materials With Depth Gradients of the Strain Free Lattice Parameter \({{\varvec{d}}}_{0}\) for the Example of a Case-Hardened Steel 20MnCr5
In the present work, ring-shaped samples made from steel 20MnCr5 were low-pressure carburized (LPC) and subsequently hardened by gas quenching...
-
Structure and Fracture Resistance of Steels in Different Zones of Railway Axles
We study the fatigue life and microstructure of railway axles with certain specific features of macrostructure detected with the help of ultrasonic...
-
Sustainable Hard Machining of AISI 304 Stainless Steel Through TiAlN, AlTiN, and TiAlSiN Coating and Multi-Criteria Decision Making Using Grey Fuzzy Coupled Taguchi Method
High strength, high ductility, low thermal conductivity and high work hardening effects of austenitic stainless steels are the foremost factors that...
-
Optimization of Cutting Parameters for Cubic Boron Nitride Tool Wear in Hard Turning AISI M2
In the hard turning process of AISI M2, due to its high hardness and high strength, the tool wear is serious. Tool wear seriously restricts the...
-
Surface Topography in Peripheral Milling of Ti-6Al-4V: Multi-scale Evaluation and Fractal Analysis
Ti-6Al-4V alloy has been widely used in aerospace and other fields with its excellent mechanical properties, but its poor machinability makes the...
