Search

Search Results

1. Ultrahigh strength and uniform corrosion in Zn-Li alloys through ultrahigh pressure supersaturated solid solution treatment for biodegradable orthopedic applications

   Zn-Li alloys are considered promising candidate materials for biodegradable orthopedic implant applications due to their high mechanical performance...

   Wan-Ying Li, Yi-Long Dai, ... Cuie Wen in Rare Metals

   Article 14 June 2024
   

2. Effect of Pretreatment after Solid Solution Treatment on the Mechanical and Corrosion Properties of 7055 Alloy Plate

   A novel heat treatment process combining cooling pretreatment after artificial aging treatment of a high-temperature solid solution was conducted to...

   L. M. Yan, Y. X. Dai, ... D. Yang in Journal of Materials Engineering and Performance

   Article 28 September 2022
   

3. Effect of Solution Treatment Temperature on Microstructure, Mechanical Properties, and Corrosion Resistance of 5A Super Duplex Stainless Steel

   The effect of solution temperature on the microstructure of 5A super duplex stainless steel (SDSS) was investigated by scanning electron microscopy...

   Chenlu Liu, Aiqin Wang, ... **gpei **e in Journal of Materials Engineering and Performance

   Article 31 October 2022
   

4. Microstructural and Mechanical Investigations in the Solution Annealing Heat Treatment of AlMo_0.5NbTa_0.5TiZr Refractory High-Entropy Alloy

   This paper reports the effect of the solution annealing heat treatment process on the microstructure evolution, hardness changes, and creep behavior...

   Mehdi Soltanalinezhad, Hamid Omidvar, Ali Farzadi in Journal of Materials Engineering and Performance

   Article 03 May 2024
   

5. Effect of solid solution treatment on microstructure and mechanical properties of Al–Si–Cu–Mg alloy prepared by semi-solid squeeze casting

   In order to explore the solid solution strengthening mechanism of Al-Si series alloy under semi-solid squeezing casting an experiment was conducted...

   Jianfei Hao, Bin Chen, ... Runxia Li in International Journal of Metalcasting

   Article 26 October 2023
   

6. Effects of Isothermal Solution Treatment on Microstructure Evolution and Tensile Properties of High Strength Near-Β Ti Alloy

   The influence of slow cooling rate and the isothermal holding temperature in isothermal solution treatment on microstructure evolution and tensile...

   Bo Song, Wenlong **ao, ... Lian Zhou in Journal of Materials Engineering and Performance

   Article 01 November 2022
   

7. Effects of Nitrogen-Added Double Shielding Gas and Solution Treatment on Duplex Stainless Steel Weld Microstructure of Deep-Penetration Tungsten Inert Gas Welding

   Duplex stainless steel possesses excellent performances when the austenite/ferrite phase ratio is close to 1:1. In this study, a double-layered...

   Ying Zou, **aosong Zhou in Journal of Materials Engineering and Performance

   Article 10 November 2022
   

8. Processing Nomex Nanofibers by Ionic Solution Blow-Spinning for Efficient High-Temperature Exhausts Treatment

   Hard-to-dissolve polymers provide next-generation alternatives for high-performance filter materials owing to their intrinsically high chemical...

   Zekun Cheng, Haiyang Wang, ... Hui Wu in Advanced Fiber Materials

   Article 08 December 2022
   

9. Bendability and ductility enhancement of 7A36 alloys through adding Sc and applying LFEC with a rapid solid solution heating rate treatment

   The present study conducted a detailed investigation to determine the effects of adding Sc and applying low-frequency electromagnetic casting (LFEC)...

   Lingfei Yang, Fang Yu, ... **angjie Wang in Journal of Materials Science

   Article 04 September 2023
   

10. Effect of Solution Treatment and Addition of Rare-Earth Yb on the Microstructure and Corrosion Resistance of AlSi₁₁Cu₃ Alloy

    The effect of solution treatment and rare-earth Yb on the microstructure and corrosion resistance of the AlSi ₁₁ Cu ₃ alloy was investigated. Optical...

    Shuqing Zhang, Jiajia He, ... Hong Yan in International Journal of Metalcasting

    Article 26 October 2022
    

11. Effect of Solution Treatment on Microstructure and Properties of Hybrid Reinforced 2124 Aluminum Matrix Composites by B₄C_p/SiC_p

    Abstract

    The 2124Ti aluminum alloy powder was self-designed and fabricated as the matrix, with micro-B ₄ C _p and nano-SiC _p adding a certain amount of Ti...

    **n Yan, **ao**g Xu, ... Jicun Ren in Protection of Metals and Physical Chemistry of Surfaces

    Article 29 December 2023
    

12. Effect of Solution Temperature on the Microstructure Evolution and Tensile Properties of GH4175 Superalloy

    In the present study, GH4175 superalloy was treated in the solution temperature range of 1100 ℃–1160 ℃ for 2 h, followed by unified aging treatment...

    Zhigang Zhang, Jiao Luo, Haokun Guo in Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

    Conference paper 2024
    

13. Effect of Solution Treatment on Recrystallization, Texture and Mechanical Properties of 7A65-T74 Aluminum Alloy Super-thick Hot Rolled Plate

    The effects of the solution treatment on the microstructure, recrystallization, texture composition and properties of 7A65-T7451 (120 mm) hot rolled...

    Chen Li, Hao Wang, ... Lina Jia in Journal of Wuhan University of Technology-Mater. Sci. Ed.

    Article 10 June 2022

14. Treatment of Natural Fibers

    Natural fiber-reinforced composites (NFRC) are being widely researched to provide a sustainable and eco-friendly solution. Natural fibers are an...

    Khubab Shaker, Azam Ali, Jiri Militky in Natural Fibers to Composites

    Chapter 2023
    

15. Polymers in Solution

    This chapter is destined for the readers not involved in the research and applications of macromolecular substances. Its purpose is the brief,...

    Muhammad Imran Malik, Dusan Berek in Liquid Chromatography of Synthetic Polymers

    Chapter 2023
    

16. Improved Mechanical Properties of Mg-1.5Sn (at.%) Alloy Due to the Synergistic Effects of a Second Phase and Incorporation of Additional Elements Through Solid-Solution Treatment

    The microstructure and compressive behavior of untreated and solid-solution-treated Mg-1.5Sn alloys combined with 0.65 at.% Ca or 0.65 at.%...

    Wandong Li, Pengcheng Rong, Lihai Chen in International Journal of Metalcasting

    Article 19 September 2022
    

17. Microstructure and corrosion resistance of solution treated A380-GNPs composites

    The effects of different solution temperatures on the microstructure and corrosion resistance of graphene nanoplatelets reinforced A380 (A380-GNPs)...

    Wenjie Hu, Zhibin Liu, ... Hong Yan in International Journal of Metalcasting

    Article 06 February 2024
    

18. Influence of Cr and Solution Treatment on Structure and Properties of New Class Lightweight Fe–Mn–Al–C Stainless Steels

    This study is a trial to understand the effect of alloying elements variation and solution heat treatment conditions on the microstructure and its...

    Nader El-Bagoury, M. E. Moussa, ... Hossam Halfa in Metallography, Microstructure, and Analysis

    Article 23 February 2022
    

19. Effects of Solution Heat Treatment Temperatures on Microstructures and Mechanical Properties of SP-700 Ti Alloys

    The aim of this study is to explore the effects of solution heat treatment temperatures on the microstructures and mechanical properties of...

    Yang-Chun Chiu, Jun-Hao Chen, Sheng-Long Lee in Journal of Materials Engineering and Performance

    Article 05 November 2021
    

20. Solution processed zirconium oxide dielectric thin films for electronic applications

    Zirconium oxide is a promising dielectric material for electronic applications due to favorable properties such as large band gap and high dielectric...

    Tahsinul Huq, Yew Hoong Wong, ... Chee-Keong Tan in Journal of Materials Science: Materials in Electronics

    Article 12 July 2024