Search

Search Results

1. Welding of High Manganese Austenitic Cast Steels Using Stainless Steel Covered Electrode

   In this study, the characterization of production welds for high manganese steel castings exposed to little or no wear and moderate stresses, using...

   Uğur Gürol in International Journal of Metalcasting

   Article 29 June 2022
   

2. Tools for the Assessment of the Laser Printability of Nickel Superalloys

   Additive Manufacturing (AM) is a revolutionary technology with great interest from the aerospace sector, due to the capability of manufacturing...

   Lova Chechik, Katerina A. Christofidou, ... Iain Todd in Metallurgical and Materials Transactions A

   Article 23 March 2023
   

3. Effects of Different Si Content and Thermal Stories on the Secondary Phase Formation, Hot Ductility, and Stress Rupture Properties of Alloy 718 Investment Castings

   Herein, the effects of microstructure on high-temperature properties (hot ductility and stress rupture life) were investigated in alloy 718...

   Andrea Niklas, Fernando Santos, ... Pedro Álvarez in Metallurgical and Materials Transactions A

   Article 15 April 2023
   

4. Keyhole TIG welding of newly developed nickel-based superalloy VDM Alloy 780

   The influence of keyhole TIG (K-TIG) welding parameters on the weld geometry and defects of a new nickel-based superalloy VDM Alloy 780 alloy were...

   Achmad Ariaseta, Nima Sadeghinia, ... Olanrewaju Ojo in Welding in the World

   Article Open access 30 November 2022
   

5. Elemental Effects on Weld Cracking Susceptibility in Al_xCoCrCu_yFeNi High-Entropy Alloy

   Weld solidification and weldability of Al _x CoCrCu _y FeNi high-entropy alloys (HEA) were characterized as a function of Al and Cu molar ratio in the...

   Alexander C. Martin, João Pedro Oliveira, Carolin Fink in Metallurgical and Materials Transactions A

   Article 04 December 2019
   

6. The development of a high-chromium, nickel-base consumable-filler metal 52XL-for nuclear applications

   This paper describes a filler metal development project designed to identify a Ni-30Cr consumable that exhibits resistance to both weld...

   C. Fink, A. T. Hope, ... J. C. Lippold in Welding in the World

   Article 29 July 2022
   

7. Weldability of Metals: Characteristics of Metals and Weldability

   This chapter presents the concept of weldability of metals and factors affecting the same. Different parameters that are used as a measure of...

   Dheerendra Kumar Dwivedi in Fundamentals of Metal Joining

   Chapter 2022
   

8. ZrO₂–BaO–B₂O₃–SiO₂ Protective Technological Coating for Protecting High-Temperature Single-Crystal Nickel Alloys During Heat Treatment

   The development of a technological coating for a heat-resistant nickel alloy with a ZhS30 single-crystal structure that is protective against...

   O. V. Vlasova, V. S. Denisova, ... O. V. Kulikova in Glass and Ceramics

   Article 01 January 2023
   

9. The Properties Evolution of Medical Mg–Zn Alloys Prepared by Semi-solid Powder Moulding

   In this study, medical Mg– x Zn ( x = 3, 6, 9 wt%) alloys were successfully prepared by a novel technique, semi-solid powder moulding. The effects of Zn...

   **a Luo, Shanghui Yang, ... Bengsheng Huang in Transactions of the Indian Institute of Metals

   Article 15 August 2021
   

10. Study of Microstructure and Mechanical Properties of Similar and Dissimilar FSW of Al 7075 and Mg AZ31 Alloys Without and With Zn Interlayer

    The similar and dissimilar joining of Al and Mg alloys are important in aerospace and automobile industries. The Al 7075 and Mg AZ31 alloys are...

    Satya Kumar Dewangan, Manwendra Kumar Tripathi, ... Manoranjan Kumar Manoj in Proceedings of the International Conference on Metallurgical Engineering and Centenary Celebration

    Conference paper 2024
    

11. HAZ Liquation Cracking Mechanism of IN-738LC Superalloy Prepared by Laser Solid Forming

    The heat-affected zone (HAZ) liquation cracking mechanism of nickel-based superalloys with high (Al+Ti) content during the laser solid forming (LSF)...

    Jianjun Xu, **n Lin, ... Weidong Huang in Metallurgical and Materials Transactions A

    Article 17 July 2018
    

12. Microstructure characterization of the weld cladding of clad steel plate A516 GR.70 - AISI 904L by electroslag strip cladding using Inconel 625 strip

    This work investigates the effect of welding on microstructure and microhardness of the clad plate of ASTM A516 steel Grade 70 coated with AISI 904L...

    Ivan Bezerra de Mello Picchi, Mathews Lima dos Santos, ... Tiago Felipe de Abreu Santos in Welding in the World

    Article 10 August 2023
    

13. Effect of in-situ heat treatment and process parameters on the laser-deposited IN718 microstructure and mechanical properties

    The direct laser-deposited Inconel 718 (IN718) specimens were produced using 1073 nm, high power continuous wave (CW), IPG Ytterbium fibre laser and...

    B. N. Masina, S. Skhosane, ... M. Tlotleng in MRS Advances

    Article 01 May 2020

14. Friction Stir Welding: A Solution to Avoid Weld Cracking in Borated Stainless Steel

    We have successfully demonstrated first direct experimental evidence of defect-free friction stir weld joints of 304B4 stainless steel using...

    H. Das, C. R. Das, ... T. K. Pal in Journal of Materials Engineering and Performance

    Article 03 November 2020
    

15. Welding Metallurgy and Weldability of High Manganese Structural Dam** Steels

    Fe–Mn alloys have been identified as suitable candidates for structural applications that require dam**. Dam** is the ability of a material to...

    M. Annor, J. N. DuPont in Metallurgical and Materials Transactions A

    Article 27 March 2024
    

16. Effect of Laser Energy Density and Scanning Strategy on Residual Stress in Laser Melting Deposited FGH4096 Superalloy

    Due to the high manufacturing cost, the failure or wear of FGH4096 superalloy parts can be quickly repaired through laser melting deposition (LMD)....

    Shuai Liu, Changsheng Liu, Chao Yuan in Journal of Materials Engineering and Performance

    Article 22 January 2024
    

17. Novel Approach for Suppressing of Hot Cracking Via Magneto-fluid Dynamic Modification of the Laser-Induced Marangoni Convection

    The occurrence of hot crackingHot cracking is a significant problem during welding processing of highly heat resistant nickel-base superalloys. Hot...

    A. Seidel, L. Degener, ... C. Leyens in Superalloys 2020

    Conference paper 2020
    

18. Structural and Fractographic Features of XVIII Century Damascus Knife Blade Fractures with Impact Bending

    It is revealed that the structure of the end and longitudinal parts of a genuine Iranian Damascus knife of the XVIII century consists of...

    D. А. Sukhanov in Metallurgist

    Article 01 July 2022
    

19. A critical understanding on the microstructure and creep failure of Super304H/T92 dissimilar multilayer welds

    Dissimilar welds between austenitic stainless steel Super304H and ferritic-martensitic steel T92 were produced using hot-wire gas tungsten arc...

    Nandha Kumar E, Ravi Sankar Kottada, G.D. Janaki Ram in Welding in the World

    Article 07 December 2023
    

20. Creep Behaviors Evaluation of IN738 Superalloy Welded by Pulsed Nd:YAG Laser Through the Small Punch Creep Test

    In this study, the creep behavior of base metal, weld metal, and heat-affected zone of IN738 superalloy welded by pulsed Nd:YAG laser was...

    Morteza Taheri, Seyed Farshid Kashani-Bozorg in Metallography, Microstructure, and Analysis

    Article 22 March 2021