Search

Search Results

1. Ultra-sensitive, highly linear, and hysteresis-free strain sensors enabled by gradient stiffness sliding strategy

   Develo** strain sensors with both high sensitivity and high linearity has always been the goal of researchers. Compared to resistive strain...

   Fuhua Xue, Qingyu Peng, ... **aodong He in npj Flexible Electronics

   Article Open access 07 March 2024
   

2. Capability Testing of Layered Specimens in Plane Strain Compression Method

   This study presents the experimental results of layer-compression tests in plane strain state as well as the role of the obtained parameters on the...

   Dániel Gy. Szőke, Martin L. Kölüs, ... Gábor J. Béres in Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

   Conference paper 2024
   

3. The Use of Strain-Induced Martensitic Transformation Phenomena to Estimate the Surface Plastic Strain Produced by Grit Blasting on Overaged 18Ni Maraging Steel

   In the present study, strain-induced martensitic transformation has been used to estimate plastic strain resulting from grit-blasting in 18Ni(300)...

   José Carlos Fortes Palau, Dilermando Nagle Travessa in Journal of Materials Engineering and Performance

   Article 29 January 2024
   

4. Full-Field Quantitative Determination of Strain and Stress Partitioning in Medium Mn TRIP Steels

   The aim of this paper is to present a new method for the quantitative determination of strain and stress partitioning in medium Mn...

   **angbo Hu, Chenghuan Liu, ... Chao Jiang in Metals and Materials International

   Article 07 October 2023
   

5. A Novel Specimen Design for Multiaxial Loading Experiments at High Strain Rates

   A specimen geometry that has four flat dog bones circumferentially arranged around the axis of the sample is proposed for combined tensile-torsional...

   Yuan Xu, Govind Gour, ... Antonio Pellegrino in Dynamic Behavior of Materials, Volume 1

   Conference paper 2024
   

6. Intermediate Strain Rate Behavior of a Polymer-Particle Composite with High Solids Loading

   The deformation and fracture behaviors of polymer-particle composites with high solids loading (≥80% wt.) are dependent on the pressure-dependent...

   Mark E. Luke, Marcia A. Cooper in Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 5

   Conference paper 2024
   

7. Pore Distribution and Damage Evaluation of Modified Red Clay Based on NMR

   Abstract

   This study investigates the modification of red clay with calcium carbonate. The pore distribution was obtained using a combination of...

   Lijie Chen, He Wang, ... Baoyou Luo in Russian Journal of Nondestructive Testing

   Article 01 January 2024
   

8. Study on the Stress–Strain Behaviour of Rubberized Textile Composite Used in Aerospace Applications

   Composites find major application in aerospace area due to their numerous benefits. Rubberized textile composites hold an important hand in realizing...

   S. B. M. Guruvayurappan, S. P. Sivapirakasam, ... S. Ratheesh in Recent Advances in Composites Engineering and Research

   Conference paper 2024
   

9. Dislocation and strain map** in metamorphic parabolic-graded InGaAs buffers on GaAs

   We investigate different architectures for parabolic-graded InGaAs metamorphic buffers grown on GaAs using transmission electron microscopy...

   Nicholas Stephen, Praveen Kumar, ... Miryam Arredondo in Journal of Materials Science

   Article Open access 07 June 2023
   

10. Strain-enhanced electrical performance in stretchable semiconducting polymers

    Intrinsically stretchable semiconducting polymers are promising candidates for develo** wearable electronics, but remain underdeveloped because the...

    Qing Zhou, Zhihui Wang, ... Yan Zhao in npj Flexible Electronics

    Article Open access 01 August 2023
    

11. Strain and Microstructural Evolution in Architected Lattices: A Comparison of Electron Beam and Laser Powder Bed Fusion

    Metallic microlattice (MML) materials enable novel material properties through geometry and topology, and through additive manufacturing (AM) there...

    Caleb Andrews, Jonas Zielinski, ... Mitra L. Taheri in Metallurgical and Materials Transactions A

    Article 18 April 2024
    

12. A Method for Measuring Plastic Strain Ratio Over a Wide Strain Range Using the Digital Image Correlation Technology

    Plastic strain ratio, also defined as Lankford coefficient or r-value, is an intrinsic material property in estimating the mechanical anisotropy and...

    Gang Hee Gu, Yongju Kim, ... Hyoung Seop Kim in Metals and Materials International

    Article 25 November 2022
    

13. Finite-Element Analysis of Stress-Strain State of Steel Reinforcement in Stretching–Bending–Rebending (Cold Stretching)

    Abstract

    The uniqueness and simplicity of the stretching–bending–rebending (SBR, cold stretching) process significantly reduces production costs,...

    D. V. Konstantinov, A. G. Korchunov, ... M. V. Zaytseva in Steel in Translation

    Article 01 November 2023
    

14. High-Strain Rate and High-Temperature Properties of Additively Manufactured Nickel-Based Alloy 718

    Nickel-based alloys are normally employed for aerospace components that experience high levels of stress at elevated temperaturesTemperature. With...

    Anjali Sankar, Manjaiah Mallaiah, ... Clodualdo Aranas in TMS 2024 153rd Annual Meeting & Exhibition Supplemental Proceedings

    Conference paper 2024
    

15. Efficient finite strain elasticity solver for phase-field simulations

    We present an effective mechanical equilibrium solution algorithm suitable for finite strain consideration within the phase-field method. The...

    Oleg Shchyglo, Muhammad Adil Ali, Hesham Salama in npj Computational Materials

    Article Open access 14 March 2024
    

16. Design of a Frequency Multiplier Based on Laterally Coupled Quantum Dots for Optoelectronic Device Applications in the Terahertz Domain: Impact of Inhomogeneous Indium Distribution, Strain, Pressure, Temperature, and Electric Field

    We have investigated the effects of size, hydrostatic pressure, temperature, electric field, and inhomogeneous indium distribution on sub-band...

    M. Choubani, N. Benzerroug in Journal of Electronic Materials

    Article 15 February 2024
    

17. Strain-induced activation of chiral-phonon emission in monolayer WS₂

    We report a theoretical investigation of the ultrafast dynamics of electrons and phonons in strained monolayer WS ₂ following photoexcitation. We show...

    Yiming Pan, Fabio Caruso in npj 2D Materials and Applications

    Article Open access 04 July 2024
    

18. Strain Rate Effect of AE Characteristics in the Whole Process of Uniaxial Tensile of Mortar

    We completed the uniaxial tensile test of mortar in the range of strain rate from 10 ⁻⁶ to 10 ⁻⁴ s ⁻¹ in the section containing softening, and carried...

    Na Wang, Yan Wang, ... Haitao Zhao in Journal of Wuhan University of Technology-Mater. Sci. Ed.

    Article 25 May 2023

19. Controlled Rivet Deformation During Self-piercing Riveting Through a Tailored Strength Distribution Within the Rivet Material

    The use of stainless steel with high strain hardening as material for self-piercing rivets is a promising approach to shorten the manufacturing...

    Benedikt Uhe, Clara-Maria Kuball, ... Gerson Meschut in Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

    Conference paper 2024
    

20. Automated Calculation of Strain Hardening Parameters from Tensile Stress vs. Strain Data for Low Carbon Steel Exhibiting Yield Point Elongation

    Existing guidance from ASTM standards on extracting mechanical properties from uniaxial tension test data is not suitable for high-volume...

    M. Scales, J.A. Kornuta, ... P. Veloo in Experimental Techniques

    Article 09 February 2023