Search

Search Results

1. Quasi-static Deformation Mechanism and Compressive Properties of Aluminum Foams Fabricated by Friction Stir Processing

   Aluminum foams with varying densities of 1.21-0.62 g/cm ³ and pore sizes of 0.3-5.8 mm were successfully fabricated by friction stir processing (FSP)...

   Deeksha Lohani, B. S. S. Daniel in Journal of Materials Engineering and Performance

   Article 10 May 2024
   

2. Dynamic Impact Compressive Behavior Investigation of Sisal Fiber-reinforced Coral Seawater Concrete

   Split Hopkinson pressure bar (SHPB) was used to investigate the dynamic compressive properties of sisal fiber reinforced coral aggregate concrete...

   Haiyan Ma, Yongshan Tan, ... Yan Zhang in Journal of Wuhan University of Technology-Mater. Sci. Ed.

   Article 01 October 2023

3. Residual Stress Analysis of Additively Manufactured and Post Processed Inconel 718

   The aim of the present work is to assess the impact of postprocessing on the residual stress distribution of additively manufactured Inconel 718...

   O. V. Mythreyi, R. Jayaganthan in Dynamic Behavior of Soft and Hard Materials, Volume 3

   Conference paper 2024
   

4. Relationship between hot workability and texture evolution in an Al–Zn–Mg–Cu alloy under hot compressive stress mode

   Al–Zn–Mg–Cu alloys exhibit the best mechanical properties among aluminum alloys, though they suffer from poor formability during metalworking...

   Chang-Hee Cho, Dal-Oh Kim, ... Hyun-Soon Park in Journal of Materials Science

   Article 05 November 2023
   

5. Influence of Microstructure Randomness on the Shear Behaviour and Compressive Strength of Continuous Carbon Fibre Composites

   Axial compressive strength is a key design parameter for CFRP structures. One of its limiting factors is the non-linear shear behaviour of the...

   Pierre-Yves Méchin, Anastasia Borras, Vincent Keryvin in Applied Composite Materials

   Article 06 May 2024
   

6. Structural transformation of Ti-based alloys during tensile and compressive loading: An insight from molecular dynamics simulations

   In this study, we investigated the structural alterations that occur when Ti-based alloys, namely, Ti _{x %} Al _{(100- x )%}  and Ti _{x %} Ni _{(100- x )%} , are subjected...

   Rizal Arifin, Dian Rifka Puja Setiawan, ... Darminto in MRS Communications

   Article 10 February 2023
   

7. Quantitative Insight into the Compressive Strain Rate Sensitivity of Polylactic Acid, Acrylonitrile Butadiene Styrene, Polyamide 12, and Polypropylene in Material Extrusion Additive Manufacturing

   Herein, a research and engineering gap, i.e., the quantitative determination of the effects of the compressive loading rate on the engineering...

   N. Vidakis, M. Petousis, ... A. Moutsopoulou in Journal of Dynamic Behavior of Materials

   Article Open access 11 April 2024
   

8. An Analysis of Tensile and Compressive Properties of Carbon Fiber High-Entropy Alloy Composite Laminates

   Tensile tests were carried out on carbon fiber high-entropy alloy, carbon fiber aluminum alloy, carbon fiber titanium alloy, and carbon...

   Z. X. Guo, H. L. Shi, ... Y. C. Li in Mechanics of Composite Materials

   Article 05 January 2024
   

9. Effect of Aging Precipitation Behavior of Ti₂Ni Phase on Compressive Properties of 54NiTi Alloy

   In this paper, the precipitation behavior and strengthening mechanism of the Ti ₂ Ni phase in 54NiTi alloy during aging treatment were systemically...

   Chunzhe Fu, Chengchuang Tao, ... **aoguang Yuan in Journal of Materials Engineering and Performance

   Article 28 March 2024
   

10. Influence of Surface Mechanical Attrition Treatment Parameters on Microstructure and Residual Stress of Mg5Zn0.2Ca Alloy

    Mg5Zn0.2Ca is a promising alloy for medical tools owing to its excellent biocompatibility and biodegradability. This study presents the impact of...

    Nilesh K. Kumbhar, Vikesh Kumar, Santosh S. Hosmani in Journal of Materials Engineering and Performance

    Article 19 September 2023
    

11. Impact of End Friction and Lateral Inertia Confinement on the Dynamic Compressive Performance of Standard and High-Strength Concrete

    Present study focused on to investigate the impact of end friction and lateral inertia on the dynamic properties of concrete obtained by performing...

    Mohammad Mohsin Khan, Mohd Ashraf Iqbal in Journal of Failure Analysis and Prevention

    Article 02 March 2024
    

12. Rate-Dependent Compressive Behaviour of SiC−B₄C−Al Hybrid Composites

    Abstract

    Effect of hybridization on the rate-dependent behaviour of Aluminum metal matrix composites (MMCs) comprising (0, 10, 20, and 30%) monolithic...

    Tulsi Chouhan, Manoj Soni in Physics of Metals and Metallography

    Article 29 December 2023
    

13. Effect of Compressive Creep and Hydrostatic Pressure on Diffusion in NiCr and NiSi Systems

    Interdiffusion coefficients were measured in NiSi and NiCr systems from diffusion couples under hydrostatic pressures between 50 and 326 MPa, at...

    Camille Salsi, Daniel Monceau, ... Thomas Gheno in Metallurgical and Materials Transactions A

    Article 05 October 2022
    

14. A Machine Learning Approach for Analyzing Residual Stress Distribution in Cold Spray Coatings

    This study establishes a machine learning (ML) model utilizing the expectation-maximization approach to predict maximum residual stresses,...

    Rosa Huaraca Aparco, Fidelia Tapia-Tadeo, ... Calixto Cañari Otero in Journal of Thermal Spray Technology

    Article 08 May 2024
    

15. Experimental investigation of compressive behavior and vibration properties of layered hybrid foam formed by aluminum foam/EPS-filled syntactic foam

    Hybrid foams are a type of composite material created by combining two foam materials. They are preferred in many applications due to their...

    Kübra Çağla Çıbıkçı, Mustafa Yaman in Journal of Materials Science

    Article Open access 06 February 2024
    

16. Effect of in situ laser shock forging on residual stress field induced by selective laser melting

    Selective laser melting (SLM) is an additive manufacturing method that generates much residual tensile stress during processing. Laser shock forging...

    **anlong Li, Laiqi Zhang, Xu Wei in Journal of Materials Science

    Article 15 December 2023
    

17. Comparative Confined Compressive Strengths of Normal Concrete and HPFRC in Experiment and Model

    This paper comparatively shows the confined compressive strengths of normal concrete (NC) and high-performance fiber-reinforced concrete (HPFRC) in...

    H. T. Tai Nguyen, Duy-Liem Nguyen, ... Tri Nhat Minh Nguyen in Proceedings of the 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022)

    Conference paper 2023
    

18. Nondestructive Method to Measure Residual Stress and Structural Properties of 1.4923 (X22CrMoV12-1) Martensitic Stainless Steel

    The current study aimed to investigate the effect of shot peening on steel with 11% Cr in order to induce compressive residual stress. Shot peening...

    Y. Shajari, A. Khiabani, ... S. H. Razavi in Journal of Materials Engineering and Performance

    Article 06 December 2023
    

19. Compressive strength of beech and birch at different moisture contents and temperatures

    Owing to increased environmental demands to replace petroleum-derived materials with more environmentally friendly materials, research has been...

    Hajir Al-musawi, Christian Huber, ... Ulrich Müller in Journal of Materials Science

    Article Open access 13 September 2023
    

20. Residual Stress Estimation Using Hole Drilling and Contour Methods in Rail Welds Treated with and without Ultrasonic Impact Treatment

    MxV Rail has explored new methods of improving the longevity of both rail and thermite welds. As a part of this research, MxV Rail explored...

    Ananyo Bandyopadhyay, Gary T. Fry, Brett Watanabe in Journal of Materials Engineering and Performance

    Article 03 June 2024