Search
Search Results
-
Improved multiferroic and magnetodielectric properties in Ni and Fe co-doped barium strontium titanate ceramics
In this research work, the room-temperature multiferroic behavior resulting from the inclusion of transition metal ions (Ni 2+ and Fe 3+ ) in lead-free
... 
-
Pyroelectric performance of zinc oxide-added 0.94Na0.5Bi0.5TiO3–0.06BaTiO3 composite
The pyroelectric material generates voltage/current in response to the thermal gradient, an effective technique for sensors and waste thermal energy...
-
Improving catalytic performance of (Ba, Ca) (Ti, Sn)O3 piezoelectric ceramics by regulating phase structure
Piezocatalysis is considered as an evolving technology based on the piezoelectric properties of catalysts, has shown great potential in the field of...
-
Antibacterial sol-gel AgMnFe2O4 composite coatings added with degradable MgO
The AgMnFe 2 O 4 -MgO composite coatings with the Ag/(Mn+Fe) atomic ratio of 0, 0.3%, 1% and 3%, respectively were prepared by sol-gel method to improve...
-
Sensitivity of the Linear and Nonlinear Optical Properties to an Electric Field and Do** Density in CdSe/MgSe Single Quantum Wells
In the present work, we explored the impact of do** concentration and applied electric field on both linear and nonlinear optical properties based...
-
Electrochemical performance of carbon derived from cluster fig leaves for symmetric supercapacitor
The activated carbon was derived from cluster fig ( Ficus racemosa ) leaves using chemical activation treatment and treated at different temperatures....
-
Effect of nano-silica on mechanical properties and microstructure of high-volume ground granulated blast furnace slag cement paste
Incorporating ground granulated blast furnace slag (GBS) as a supplementary cementitious material in cementitious materials can reduce the cement...
-
Polyepitaxial grain matching to study the oxidation of uranium dioxide
Although the principal physical behaviour of a material is inherently connected to its fundamental crystal structure, the behaviours observed in the...
-
Influence of sintering temperature on structural, electrical, dielectric, and magnetic properties of magnesium ferrite (MgFe2O4) ceramics prepared using powder derived via Sol-Gel auto-combustion
Polycrystalline magnesium ferrite (MgFe 2 O 4 ) ceramics were prepared using as-prepared MgFe 2 O 4 powder derived via sol-gel auto combustion method, and...
-
-
Study on the Precipitation Strengthening Mechanism of Mg–10Zn–5Al–0.2Sc Alloy
The Mg–10Zn–5Al–0.2Sc (wt%) alloy was fabricated through gravity casting and subsequent heat treatment. The microstructure and precipitates of the...
-
Design of zinc-doped copper ferrite nanostructures using microwave combustion process and its supercapacitive features
Rapidly increasing demand for electrical energy due to unprecedented growth of electronic gadgets urges the research on develo** innovative...
-
DATACORTECH: artificial intelligence platform for the virtual screen of aluminum corrosion inhibitors
The machine learning framework reported herein can greatly accelerate the development of more effective and sustainable corrosion inhibitors for...
-
Electrical and γ-Ray Attenuation Properties of Bario-Borate Sodium Glasses at Various Manganese Ion Concentrations
Using a melt quenching procedure, bario-borate sodium glasses with varying concentrations of manganese ions (60B 2 O 3 -20NaF-(20-x)BaO-XMnO, where X = 0...
-
Growth Kinetics and Development of the Solid–Liquid Interface in Low-Carbon and High-Alloy Steel Castings Enabled by Confocal Microscopy
High-Temperature Laser Scanning Confocal Microscopy (HT-LSCM) is an in situ technique that can be used for direct observation of the microstructure...
-
Refinement Mechanism of the Hypoeutectic Al–7Si Alloy by Adding a Novel La-Rich Rare-Earth Grain Refiner
Refining the grain size of the as-casted hypoeutectic Al–Si alloys is an established technique for improving their mechanical properties. This work...
-
Effect of nickel oxide concentration on titanium oxide bilayer photoanode for dye-sensitized solar cell application
The mesoporous titanium oxide has attracted significant attention as a photoanode material for Dye-Sensitized Solar Cells (DSSCs). In the present...
-
Corrosion behavior of the second phase in Mg–9Gd–3Y–2Zn–0.5Zr alloy under simulated coastal storage environment
The Mg–9Gd–3Y–2Zn–0.5Zr alloy was studied for its long-term corrosion behavior in a simulated coastal storage environment. The results show that the...
-
Life cycle assessment of aerogels: a critical review
Over the past decade, the increasing emphasis on sustainable material production has brought aerogel technology to the forefront of scientific and...
-
Failure analysis of nanoscale VO2 used as the cathode electrode for aqueous zinc-ion batteries
In this study, VO 2 nanoparticles were synthesized in a single step using a simple and rapid low-temperature combustion synthesis method. When used as...
