Search
Search Results
-
Synthesis and characterization of β-spodumene by a new sol–gel route assisted by whey protein
Spodumene (LiAlSi 2 O 6 ) has gained attention due to its versatile applications, which include ionizing radiation dosimetry, observed in either...
-
Design and performance of novel ZnO/CoS2 S-scheme heterostructure as a photocatalyst for Cr (VI) reduction and TC degradation and as an electrocatalyst for OER
In this study, we synthesized a novel ZnO/CoS 2 S-scheme heterojunction and used it as an electrocatalyst for the oxygen evolution reaction (OER) and...
-
Simulation-Based DC and RF Performance Analysis of an Enhancement-Mode T-Gate Al0.15Ga0.85N/GaN/Al0.07Ga0.93N/GaN/Al0.05Ga0.95N MIS-HEMT Device on a GaN Substrate
This paper presents a metal–insulator–semiconductor high-electron-mobility transistor (MIS-HEMT) device, operating in enhancement mode, with a...
-
-
Improved response and recovery times of flexible screen-printed working electrode performance for hydrogen gas detection by copper oxide chitosan
This article presents a study on a non-invasive hydrogen gas sensor for detecting gastrointestinal disorders at room temperature based on...
-
Transient shuttle for a widespread neural probe with minimal perturbation
Bioelectronic implants in the deep brain provide the opportunity to monitor deep brain activity with potential applications in disease diagnostics...
-
Effect of bonding time on reliability of Cu/Sn-9Zn-30Cu/Cu solder joints for 3D packaging
Cu/Sn-9Zn-30Cu/Cu 3D packaging solder joints were prepared by transient liquid phase (TLP) bonding. The effect of bonding time on microstructure,...
-
A Random Pore Model Approach Towards Hematite to Iron Reduction by Carbon Monoxide: A Computational and Experimental Study
AbstractIn this work, the random pore model (RPM) is utilized for the kinetic study of hematite reduction to Iron with CO. This can significantly...
-
Solution processed zirconium oxide dielectric thin films for electronic applications
Zirconium oxide is a promising dielectric material for electronic applications due to favorable properties such as large band gap and high dielectric...
-
Cement kiln dust-based geopolymer: Microstructural investigation and performances optimization through response surface methodology
Cement kiln dust (CKD), which consisted of mullite, quartz, fused silica, and calcite (49, 23, 11, and 10 mass%, respectively) was alkali-activated...
-
Sensor degradation in nuclear reactor pressure vessels: the overlooked factor in remaining useful life prediction
Sensor degradation poses a critical yet ‘often overlooked’ challenge in accurately predicting the remaining useful life (RUL) of nuclear reactor...
-
Twist angle-dependent transport properties of twisted bilayer graphene
Twisted bilayer graphene (tBLG) with small twist angles has attracted significant attention because of its unique electronic properties arising from...
-
Comparative Analysis of Fixed-Grid Methods in Addressing a Benchmark Problem Coupled Natural Convection and Melting
For decades, the fixed-grid method (FGM) has undergone extensive development and widespread application in addressing phase change problems....
-
Sol-gel synthesized CuO nanoparticles supported on reduced graphene oxide nanocomposite for sunlight-catalytic methylene blue degradation and nanofluid applications
The presence of organic dye contaminations has been a major concern in recent years. Metal oxides and their composite have created a huge interest in...
-
Effects of Rapid Heat Treatments on the Properties of Cu2O Thin Films Deposited at Room Temperature Using an Ammonia-Free SILAR Technique
We report herein the analysis of the properties of copper(I) oxide thin films deposited by an optimized ammonium-free successive ion layer adsorption...
-
Universal hydrogel adhesives with robust chain entanglement for bridging soft electronic materials
Ensuring stable integration of diverse soft electronic components for reliable operation under dynamic conditions is crucial. However, integrating...
-
Molecular modeling applied to corrosion inhibition: a critical review
In the last few years, organic corrosion inhibitors have been used as a green alternative to toxic inorganic compounds to prevent corrosion in...
-
Electric Field-Induced Mott Insulator-to-Metal Transition and Memristive Behaviour in Epitaxial V\(_2\)O\(_3\) Thin Film
We report an isothermal electric field-induced first-order phase transition from a Mott insulator to the metallic state in the epitaxial thin film of...
-
Structural, morphological, optical and electrical characterization of MgO thin films grown by sputtering technique on different substrates
Magnesium Oxide (MgO) thin film structures were deposited on glass and n-Si substrates by means of RF magnetron sputtering technique. Structural,...
