Search
Search Results
-
Effects of aqueous nanoparticle suspension injection on a shale’s mechanical properties
This paper presents the first effort to unravel and quantify the strengthening of a shale induced by nanoparticle injection from the perspectives of...
-
Assessment of the compressive mechanical behavior of injection molded E-glass/polypropylene by mechanical testing and X-ray computed tomography
Nowadays, thermoplastic composite materials are considered among the most promising ones as they are gaining the interest of many industrial sectors...
-
Effect of Sintering Environment on Microstructures and Mechanical Properties of Metal Injection Molding Ti-6Al-4V Alloys
We employed a water-soluble binder to form Ti-6Al-4V alloy through metal injection molding and studied the effects of sintering (under Ar and various...
-
Dense layer, microstructure, and mechanical performances of Ti–6Al–4V alloy prepared by metal injection molding
One of the most recent methods for fabricating titanium-based products is metal injection molding (MIM). However, there have been few systematic...
-
Development of a rapid heat cycle injection molding system using infrared radiation and convection heating and influence on morphology and mechanical properties
Conventional injection molding is widely used to produce plastic parts, mainly in the automotive industry, due to the high production ratios and...
-
A Comprehensive Review of Additively Manufactured H13 Tool Steel Applicable in the Injection Mold Industry: Applications, Designs, Microstructure, Mechanical Properties
Recently, additive manufacturing (AM) has demonstrated strong potential in critical industrial applications requiring high-performance mechanical...
-
Research and Analysis on Knocking Noise of Mechanical Vacuum Pump of Turbocharged Direct Injection Engine
In the present paper, the knocking noise of a mechanical vacuum pump of turbocharged direct injection engine is researched. By noise, vibration,...
-
Experimental and Numerical Analysis of Fluid-Injection Unloading Rock Failure Process
The aim of this study is to investigate the mechanical responses and failure characteristics of fissured rock-like materials subjected to fluid...
-
Influence of Silica Nanoparticles on Mechanical Properties of Bast Fibers Made Epoxy Composite via Injection Moulding Route
Polymer-based composites are crucial in various engineering domains such as automobile, marine, and construction applications. Specifically, these...
-
Stabilization of Soil Using Polyurethane Resin Injection Technology
The use of ground improvement technology, specifically soil injection using polyurethane resin, has gained significant attention in the construction...
-
Vibration-assisted injection molding: an efficient process for enhanced crystallinity development and mechanical characteristics for poly lactic acid
Injection molding of semi-crystalline poly lactic acid (PLA) parts requires a long cycle time and annealing as a post-fabrication technique....
-
Microstructure and mechanical properties of gamma titanium aluminide alloys fabricated by metal injection molding using non-spherical powder
Metal injection molding (MIM) is a very effective way to prepare brittle TiAl alloy parts. In this study, the rheological properties of feedstocks,...
-
Analysis on Noise of High Pressure Direct Injection System
The identification and solution of NVH problem is the main way to continuously improve the comfort in the mechanical field. With the application of...
-
Mechanical Properties of Injection-Molded Poly-Lactic Acid (PLA) Reinforced with Magnesium Hydroxide for Biomedical Application
The combination of poly-lactic acid/magnesium hydroxide (PLA/Mg(OH)2) with low weight, biodegradability, and favorable mechanical properties make it...
-
The Design of an Injection Mould for the “ENGINE BUFFER” Benchmark – Case Study
The main requirement of this thesis is the realization of a mould which is intended for the injection moulding process of plastics for the...
-
Numerical Simulation of Mould-Open Microcellular Injection Moulding
To minimise common defects of plastic parts produced by microcellular injection moulding (MuCell®), such as poor surface quality and mechanical...
-
ICM 4.0 – Injection Moulding Machine Control and Monitoring
Today, gathering relevant information on a certain industrial process and being able to monitor and store that data is now more important than ever....
-
Experimental study on mechanical behaviors of injection molded PC/PMMA blends
Mechanical property is one of the quite important factors of optical articles. Most of pure plastics materials are rarely found to have both high...
-
Thermomechanical Evaluation of Thermoplastics Injection Cycle Effects in Aluminium Moulds Using the Finite Element Method
The mould stiffness becomes more relevant during the packing stage, therefore predicting the mould mechanical behaviour when submitted to the loading...
-
Hydro-mechanical response of Opalinus Clay in the CO2 long-term periodic injection experiment (CO2LPIE) at the Mont Terri rock laboratory
AbstractGuaranteeing the sealing capacity of caprocks becomes paramount as CO 2 storage scales up to the gigaton scale. A significant number of...
