Search
Search Results
-
Hardness Investigation of the Electroplated Ni–Co Alloy
Electroplated hard metal coatings are sought after for their anti-wear properties and cost-effective deposition process. However, traditional choices... -
Investigation on the Hardness of Al6061 Alloys: Implications of Seawater Corrosion
This study aims to investigate the impact of seawater corrosion on the hardness of Al-Mg-Si alloys, providing insights into the mechanical...
-
Wear Behaviour and Hardness of CNT Reinforced Alumina Composites
Alumina matrix composite enhanced with carbon nano-tubes was manufactured using the sol-gel method. Investigated were the effects of CNT varying... -
Optimal Hardness Ratio of Wheel Steel and Rail Steel for Minimum Wear
AbstractThe optimal hardness range of the hardened wheel rim and the rolling surface of the rail is determined, in terms of maximum wear resistance...
-
Optical Microstructural and Hardness Analysis of an Al–Si Alloy-Based Piston
This study presents a comprehensive analysis of microstructure and hardness characteristics of used pistons, shedding light on their structural...
-
Effect of nitrile butadiene rubber hardness on the sealing characteristics of hydraulic O-ring rod seals
The nitrile butadiene rubber (NBR) hardness effect on the sealing characteristics of hydraulic O-ring rod seals is analyzed based on a mixed...
-
Hardness and Ferrite Grain Size Evaluation of X70 Steel Using Magnetic Barkhausen Noise Method
In the present paper, magnetic Barkhausen noise (MBN) measurements have been carried out to evaluate the hardness and ferrite grain size of API X70...
-
Optimal Design of Contact Interface Material Hardness for Improving Thermal Contact Performance
The material hardness distribution of the contact interface is the core factor affecting the elastic–plastic contact deformation behavior, and its... -
Investigation of cryo-treatment on hardness and XRD profile of WC and AlTiN coated inserts
The recent trend in the machining industry is moving towards dry cutting by considering cost and environmental factors. But the dry cutting of...
-
Prediction of spring steel wire rod hardness based on wire rod rolling process data: a case study
This study aims to predict the hardness of steel wire rods produced in the actual process by using statistical analysis and machine learning...
-
Parametric effects of single-point incremental forming on the hardness of high carbon steel sheets
Incremental sheet forming (ISF) is a promising die-less metal forming process where a rotating tool applies incremental pressure on the sheet to be...
-
A Visco-Hypoplastic Model with Solid Hardness Degradation for Granular Soil
In order to investigate creep failure behaviour of granular soil, a visco-hypoplastic constitutive model accounting for the solid hardness... -
Effect of Aging Temperature on Microstructure, Hardness and Thermal Property of AA7085 Alloy
AA7085 Al alloy is age hardenable, with superior strength to weight ratio, and is insensitive to quenching that features in aerostructural...
-
Relationship between Hardness and Deformation during Cold Rolling Process of Complex Profiles
The hardening on surface of complex profiles such as thread and spline manufactured by cold rolling can effectively improve the mechanical properties...
-
Impact of Milling on Hardness and Optical Transmission of PMMA Lenses
This study evaluates the impacts of milling on the hardness and optical transmission of PMMA lenses using experimental and mathematical models. Three... -
A comparative study of the thermal and mechanical cutting influence on the cut-edge hardness of structural steels S355 and S1100
Thermal and mechanical cutting processes are commonly applied in manufacturing industries for making a specific size and shape of samples. The...
-
Impact of Coating Variables on Micro-hardness in Ni–W–P Electroless Coatings: Experimental Assessment, Modelling and Optimization
The investigation presents findings on the impact of coating parameters on coating hardness utilizing the Taguchi method and a computational model...
-
Taguchi-Grey relational analysis driven multi-objective optimization of weld bead geometry and hardness in laser welded Ti6Al4V Alloy
This study used Taguchi-based Grey relational analysis to optimize the bead geometry (bead width and length) and the hardness of laser welded 3 mm...
-
Abnormal Signals Elimination in Hardness Evaluation Using Barkhausen Noise and Tangential Magnetic Field
In this paper, magnetic Barkhausen noise (MBN) and tangential magnetic field (TMF) are employed to quantitatively predict the hardness of bearing...
-
Viscoelastic Moduli and Path-Dependent Hardness Across Four Decades of Timescale in Semicrystalline Polymers from Berkovich Nanoindentation
Berkovich nanoindentation was used to characterize viscoelastic and viscoplastic deformations in the semicrystalline polymers, poly(ether ether...