Search
Search Results
-
Application of Anodic Titania, Alumina, Zirconia and Tin Oxide in Sensorics
This article describes the possibilities of using anodic titania, zirconia, alumina and tin oxide as a basis for sensors. The mechanism of operation...
-
Wear resistance of hard anodic coatings fabricated on 5005 and 6061 aluminum alloys
The wear resistance of hard anodic coatings fabricated on 5005 and 6061 aluminum alloys was determined. The Taber abrasion test, ball-on-disc...
-
Capillary Performance of Nanoporous Aluminum Braided Wicks Prepared by Anodic Oxidation
With the rapid development of two-phase heat exchangers, the further improvement of the capillary performance of their internal wick faces a great...
-
Fuzzy Analysis, Fabrication and Characterization of Nano-porous Anodic Aluminum Oxide Membrane for Bio-MEMS
Anodization is an efficient and significant method for the production of hexagonal well-order and uniform nano-porous structures. The two steps of... -
Effect of Homogenization on Anodic Film and Electrochemical Behavior of an A535 Alloy After Sealing with Stearic Sealant
Almag 35 (A535) is a commercial aluminum alloy intended for a number of marine components, which is mainly justified by its excellent castability and... -
Anti-corrosion Aluminum Matrix Composites
As a typical carbonaceous nanomaterial, graphene nanoplatelets (GNPs), sparked with their extraordinary strength and elastic modulus, have gained... -
Effect of anodization and loading on fatigue life of 2618-T851 aluminum alloy
Anodizing process is largely performed on aluminum alloys to enhance corrosion and wear resistances. However, this process can significantly reduce...
-
Tribological and corrosion behavior of PEO coatings on AA 2024‐T3 aluminum alloy obtained with optimized electrical parameters under low current densities
Aiming to improve the wear and corrosion resistance of the AA 2024-T3 aluminum alloy with the best energy efficiency, PEO coatings were obtained...
-
Numerical Simulations of Wettability on Anodic Bubble Expansion in Aluminum Electrolysis Cell Using Lattice Boltzmann Method
This work aims to study the interfacial phenomena in a multiphase system with a bubble beneath the anode block. At the macroscopic scale, the...
-
Anodic Behavior of Ni48Fe47Cu5 and Ni42Fe38Cu20 in Potassium-Rich NaF-KF-AlF3-Al2O3 Melts
The anodic behavior of Ni 48 Fe 47 Cu 5 and Ni 42 Fe 38 Cu 20 alloys in NaF-KF-AlF 3 -Al 2 O 3 electrolyte was studied using electrochemical methods, such as...
-
Enhancing the Electroplated Chromium Coating for Corrosion Protection of Aluminum by Adding Graphene Oxide
AbstractThe effect of the addition of graphene oxide (GO) particles to the chromium electroplated coating on the surface of commercially pure...
-
Accurate Measurement of Anode Current in Aluminum Electrolysis: From Ideal to Reality
The electrolytic cellCell control systems, designed on the basis of cellCell voltage and line current, are becoming increasingly unsuitable for large... -
Corrosion Behavior of Aluminum Alloys in Hydrogen Chloride Containing Environments
In petrochemical industries, aluminum is normally used in cryogenic heat exchangers such as main cryogenic heat exchangers and cold boxes because of... -
Tribocorrosive Behavior of Aluminum Alloy AA2024 Under Electrochemical Polarization
The purpose of the work—to study the frictional interaction of tribotechnical pairs: alloy AA2024—co-rundum indenter, interacting in an acidic... -
Magnetic Properties of Ni Nanowires in Porous Anodic Alumina Matrix
Abstract —This paper focuses on the investigation of magnetic properties of Ni nanowire arrays synthesized using Al 2 O 3 porous template. Porous...
-
Research on the growth behavior of scanning microarc oxide film
Micro-arc oxidation (MAO) is one of the most effective techniques for producing ceramic coatings on metal surfaces and is widely used for metal...
-
Experimental Investigation, Modeling and Optimization of Parameters in Hard Anodizing of 6063 Aluminum Alloy Using Central Composite Design
Aluminum alloy forms a protective layer of aluminum oxide when exposed to air, which gives it corrosion resistance. But, the layer can be easily...
-
A Comparative Experimental Study of Acids Used for Anodic Oxidation for the Purposes of Aerospace Industry
The article compares 4 types of anodic oxidation technology in terms of corrosion resistance, ecological and technological point of view. The work... -
Alumina and Silicone Oxide Dielectric Films for Focal Plane Arrays Based on InSb
AbstractIn this study, MIS structures In/Al 2 O 3 /InSb and In/SiO x /anodic oxide/InSb were characterized. The A2O3 insulator layer were formed by the...
-
Verifying Aluminum-Air Fuel Cell for Unmanned Aerial Vehicle During Operation in the Field
This work describes the effects of changes in water based electrolyte composition on the performance of the aluminum-air chemical current source. A...