Search
Search Results
-
-
Microstructure and mechanical properties of WC–TiC–Co cemented carbides produced by spark plasma sintering (SPS) method
Cemented carbide 91 wt% WC–3 wt% TiC–6 wt% Co was sintered by spark plasma sintering at different temperatures of 1200 °C, 1300 °C, and 1400 °C and...
-
Evolution of electrical resistance of graphite foils during spark plasma sintering
The progression of the electrical resistance of graphite foils during spark plasma sintering process (SPS) was investigated at constant temperature...
-
Corrosion characteristics of high-entropy alloys prepared by spark plasma sintering
High-entropy alloys (HEAs) are special type of alloy suitably developed for use in petroleum exploration, energy storage devices, medical implants,...
-
-
Coupling direct powder deposition with spark plasma sintering: a new approach towards rapid prototy**
In this paper, we propose a modified material jetting technology based on a piezoelectric-driven powder deposition, hence direct powder deposition...
-
Spark Plasma Sintering of Mechanically Alloyed High Entropy Nitrides to Investigate the Mechanical, Tribological, and Oxidation Properties
Ultra-high temperature ceramics (UHTCs) consist of a mixture of different ceramics compounds like boride, carbide, diboride, and nitride of the...
-
Optimization modelling of spark plasma sintering parameters of SS316-B4C composite
Process parameter optimisation is often performed to improve process efficiency and cost-effectiveness. To fabricate stainless steel (SS316)-10 wt%...
-
Ablation Resistance of ZrB2-SiC-Si Composite Coatings Applied on Graphite Substrate by Spark Plasma Sintering
In this research, a protective composite coating made of ultra-high-temperature ceramics (UHTCs) was applied on the graphite substrate to boost the...
-
Wear and oxidation behavior of Ti-7Al-1Mo/TiN composites fabricated via spark plasma sintering
The research on the alloys of titanium (Ti) has been extensive due to the need for materials with remarkable resistance to oxidation and wear in...
-
Spark plasma sintering of Al–SiC composites with high SiC content: study of microstructure and tribological properties
The article presents the results of the microstructure and tribological properties of Al– x SiC composites ( x = 70 and 90 wt% SiC) produced in spark...
-
Spark plasma sintering of discontinuously reinforced titanium matrix composites: densification, microstructure and mechanical properties — a review
Titanium matrix composites (TMCs) reinforced with discontinuous ceramics and carbonaceous materials are increasingly attracting the attention of...
-
Densification and wear behavior of Cu-TiC composites via spark plasma sintering in situ degassing
Spark plasma sintering (SPS) in situ degassing process of copper reinforced with TiC powder was examined on densification and wear behavior of copper...
-
Specific Features of Temperature Distribution During Spark Plasma Sintering of Two or More Materials Simultaneously
To determine the temperature distribution both on contact boundaries and directly in each of two materials during their simultaneous spark plasma...
-
The spark plasma sintering of the optimized parametric process for the magnesium alloy reinforced hybrid nano-ceramics
A novel hybridized magnesium-based metal matrix composite consolidated with 4wt%AlN-4wt% Y 2 O 3 -4wt%VB nano-ceramics has been developed via powder...
-
Optimization of process parameters for the development of Ni–Al-Ti-Mn-Co-Fe–Cr high entropy alloy system via spark plasma sintering
A novel equal atomic Ni–Al-Ti-Mn-Co-Fe–Cr high entropy alloy (HEA) was developed via the spark plasma sintering (SPS) process. This study...
-
Cyclic Oxidation and Diffusion-Controlled Performance of Ti2AlC MAX-Phase Produced by Spark Plasma Sintering
The Al 2 O 3 forming MAX-phase Ti 2 AlC has potential to be used in the high-temperature combustion chambers of aircraft engines. In this work, Ti 2 AlC...
-
Thermal Conductivity and Microstructure of Cu-Coated Graphite Flake/Ti Alloy Composites Fabricated by Spark Plasma Sintering
Graphite flake (GF)-reinforced Ti6Al4V (TC4) matrix composites were fabricated by spark plasma sintering, and electroless copper (Cu) plating on the...
-
Development of Technology for Spark Plasma Sintering of High-Entropy Target Cathodes for Synthesis of Wear-Resistant Coatings on Cutting Tools
The article is devoted to the problem of increasing the wear resistance of cutting tools. One way to solve the problem is the application of...
-
Assessment of Nanomechanical and Tribological Performance of Refractory Nitride-Reinforced Titanium Alloy Matrix Composites Developed by Spark Plasma Sintering
The dual-phase titanium alloy Ti6Al4V, presents overall top performance for most-used weight reduction titanium alloy usage in aerospace production,...
