Search
Search Results
-
Piezomagnetic Behaviour of Wire Arc Additively Manufactured Steel Single-lap Shear Bolted Connections
In this paper, the piezomagnetic response of single-lap shear failure of wire arc additively manufactured (WAAM) steel bolted connections was...
-
Tightening torque effect on fatigue performance of single-lap joints
The present work aims to investigate the fatigue performance, by detecting changes in the first-order natural frequency, of single-lap joint...
-
Stress Analysis of Single Lap Joint Using Al 6063 and GFRP as Adherents with Bond 108 as Adhesive
This paper presents experimental and numerical analysis of joints fabricated from Al6063 aluminum alloy with glass fiber-reinforced polymer (epoxy...
-
Damage onset in CFRP single lap joint for DD and QUAD laminates
The most usual layup in composite design, namely QUAD, has the plies oriented at 0°, 90° and ±45°. Alternatively, double-double (DD) laminates were...
-
In-situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap Shear Test with a Composite-Metal Clinch Point
Clinching is a well-established joining technology, e.g. in automotive production, because of its cost-efficiency and the ability to join different... -
Experimental Identification of Damage in Single Lap Joint
This work aims at presenting the development of an analytical model for Structural Health Monitoring (SHM) to evaluate damages on Single Lap Joints... -
Joining of AA5052 to CF/PEEK by friction lap welding
The joining of aluminum alloy AA5052 and carbon-fiber-reinforced polyether ether ketone (CF/PEEK) by friction lap welding was investigated under...
-
Design, Development, and Performance Evaluation of FDM-Based Fastening Techniques for Single-Lap Joints
This study illustrates the utilization of 3D-printed fastening mechanisms for the design and development of hybrid single-lap joints. For this...
-
Effects of adherends’ misalignment on the strength of single-lap joints under 3-point and 4-point bending tests
Geometric errors of parts affect not only the geometric deviations of the products obtained by assembling these parts through glue but also the...
-
Investigation of the Mechanical Performance of Carbon Fiber Reinforced Polymer and Aluminum 2024 Alloy Lap Joints
Composite materials and lightweight aluminum alloys are in high demand for applications necessitating a balance of low weight and high strength,...
-
An energy-based analytical model for adhesively bonded stepped and simple-lap joined CFRP laminates
An energy-based analytical model is proposed here to investigate the mechanical behavior of adhesively bonded simple-lap and stepped-lap joints (SLJ)...
-
Mechanical properties analysis and experimental study of double-lap mechanically connected carbon fiber drive shafts
The application of carbon fiber in the drive shaft received grave concern in vehicle design due to its excellent lightweight and mechanical...
-
Effect of a novel pin tool with large diameter disc on the microstructure and mechanical properties of Al/Mg dissimilar friction stir lap joint
In this paper, a novel friction stir welding tool with large diameter disc at the tip of the pin was developed to solve the problems in...
-
Effect of adhesive layer properties on the shear strength of single-lap structures of dissimilar materials based on the cohesive zone model
An analysis method for improving the shear strength for the single-lap joints of dissimilar materials based on the cohesive zone model (CZM) is...
-
Research on the Mechanical Properties of Single-Lap Rivet-Bonded Hybrid Joint Considering the Rivet Forming Process
BackgroundThis paper investigates the mechanical properties and failure behaviours of rivet-bonded hybrid joints composed of aluminium adherends and...
-
Block Shear Strength of Double-Lap Welded Connections in Mild Carbon Steel Plate
This paper presents experimental and numerical investigations related to the block shear mechanism of double-lap welded connections. The experiment...
-
Effect of bottom sheet thickness on weld properties during laser lap welding of aluminum and copper
Continuous laser lap welding for a dissimilar combination of aluminum (Al) and copper (Cu) was achieved successfully. The successful welding was...
-
Investigation of the synergistic effect of materials and geometry on stress distribution in brittle adhesive joints submitted to lap-shear test
The choice of structural adhesives can be paradoxical since stiffer adhesives increase strength but tend to favor stress concentration and more...
-
Experimental Evaluation of Fatigue Life in Elastically Bended Double-Lap Bolted Joint
Double-lap bolted joints have been widely applied for connecting parts in various Industries owing to their structural stability and ease of...
-
Influence of hook geometry on failure mechanism of Al6061-galvanized steel dissimilar FSW lap joint
In the present article, the seam lap joining of the Al6061 and galvanized steel sheet is carried out using friction stir welding. A unique...