Search
Search Results
-
Properties and printability evaluation of three-dimensional printing magnesium oxychloride cement by fully utilizing aeolian sand
Three-dimensional concrete printing (3DCP) is increasingly being applied in harsh environments and isolated regions. However, the effective...
-
Printability and hardening performance of three-dimensionally-printed geopolymer based on lunar regolith simulant for automated construction of lunar infrastructure
Using an in situ lunar regolith as a construction material in combination with 3D printing not only reduces the weight of materials carried from the...
-
Printability Study of Electroluminescent Flexographic Inks
This paper uses Alq3 as the organic electroluminescent material in order to develop a high-performing electroluminescent flexo ink. The effects of...
-
A priori evaluation of the printability of water-based anode dispersions in inkjet printing
Inkjet printing represents a disruptive additive manufacturing technology that has emerged as an innovative approach to generate customized...
-
Improvements in the Printability of Printed Mortar Using In-Situ Polymerization
Polymers are often used as viscosity-modifying agents to improve the printability of 3D printed concrete (3DPC). However, they fail to offer quick...
-
An innovative carbonated cementitious material and its printability and carbon mineralization capacity
The main goal of this research is to develop a carbonated cementitious material (CCMs) mix design and demonstrate its rapid stiffening for...
-
Numerical simulation and printability analysis of fused deposition modeling with dual-temperature control
Ideal tissue engineering scaffolds need interconnected pores and high porosity to enable cell survival, migration, proliferation, and...
-
Impact of Water to Solids Ratio on Stability, Printability, and Mechanical Characteristics of 3D Printable Foam Concrete
Foam stability plays a major role in designing foam concrete mix amenable for 3D printing. Unlike conventional foam concrete, 3D printable foam...
-
Effect of particle shape on rheology and printability of highly filled reactive inks for direct ink writing
Highly filled inks including a reactive titanium–boron composite powder (with Ti·2B composition), a polymeric binder, and a solvent mixture combining...
-
Printability and Shape Stability of Cement Mortar Incorporating Low Volume of Micro-Polypropylene Fiber for 3D Printing Application
This study investigated the printability and shape stability of cement mortar with micro-polypropylene fiber for 3D printing application. Mortar...
-
Printability Assessment and Optimization of Process Parameters for 3D Printing of Rice Flour and Jaggery Paste
PurposeA study is conducted to investigate the effect of 3D printing process parameters, i.e., nozzle diameter(ND), layer height(LH), path width...
-
Fine Porous Stainless Steel TPMS Cellular Structures: Printability and Post-Processing Evaluation
Triply periodic minimal surfaces (TPMS) are emerging as an excellent solution for manufacturing porous structures due to their smooth surface and...
-
FDM Technology: Overhangs versus Layer Height Printability Performance Correlation
FDM (Fused Deposition Modelling) is the most popular 3D printing technology worldwide due to its simplicity and low costs. One of the key points of...
-
Printability Assessment of Cement-Based Materials Using Uniaxial Compression Test
Concrete 3D printing, a cutting-edge manufacturing technology, is gras** increasing interest in the construction industry. Striking a balance...
-
Printability, Defect, and Microstructure of Laser Powder Bed Fused Y2O3 Nanoparticles Dispersed IN738LC Superalloy
Additive manufacturing (AM) of nickel (Ni)-based superalloys, which contain high concentration of titanium (Ti) and aluminum (Al) elements, has posed...
-
A printability evaluation of fine and coarse powder in binder jetting of dense and porous copper parts
Binder jetting is a sinter-based additive manufacturing technique that integrates the layer-wise deposition in powder bed-based 3D printing with the...
-
Printability Assessment of Ethyl Cellulose Biopolymer Using Direct Ink Writing
The goal of this article is to investigate the printability of ethyl cellulose, a biomass derived polymer, using a custom-modified direct ink writing...
-
Effect of graphene nanoplatelets and multiwalled carbon nanotubes on the viscous and viscoelastic properties and printability of polylactide nanocomposites
Linear and non-linear viscoelasticity, relaxation behavior and steady shear viscosity of polylactide (PLA) nanocomposites filled with 1.5–9 wt.%...
-
Effect of Kaolinite’s Addition to Inking Oil on Printability of Water-Based Inks
Objective: To investigate the influence of kaolin on the printability of water-based ink. Methods: Use kaolin to prepare diluent, adding different...
-
Early Age Shear and Tensile Fracture Properties of 3D Printable Cementitious Mortar to Assess Printability Window
Digital fabrication with concrete is a giant leap forward for the concrete construction industry in achieving its sustainability goals. Concrete 3D...