Search

Search Results

1. Optimum Optical Designs for Diffraction-Limited Terahertz Spectroscopy and Imaging Systems Using Off-Axis Parabolic Mirrors

   Off-axis parabolic mirrors (OAPMs) are widely used in the THz and mm-wave communities for spectroscopy and imaging applications, as a result of their...

   Nishtha Chopra, James Lloyd-Hughes in Journal of Infrared, Millimeter, and Terahertz Waves

   Article Open access 21 November 2023
   

2. Using the Reflection Ellipsometry to Detect the Stress for the Gold Coating Reflection Mirrors

   The residual stress information of the precision surface optical device with a metal coating plays an important role in precision optical...

   Chenyu Wang, Wei Liu, ... Ziren Luo in Microgravity Science and Technology

   Article 26 September 2022
   

3. Mechanical stress estimation using PiezoFET octagonal current mirrors

   This paper covers the design, characterization and calibration of stress sensors useful to measure the in-plane stress at the surface of integrated...

   Jose L. Ramirez, Fabiano Fruett in Analog Integrated Circuits and Signal Processing

   Article 12 April 2020
   

4. Torsional resonator of Pd–Si–Cu metallic glass with a low rotational spring constant

   In this study, a Pd–Si–Cu metallic glass was applied to a torsional resonator with long torsion beams. It is challenging to obtain the excellent...

   Masaya Toda, Chunyang Li, ... Takahito Ono in Microsystem Technologies

   Article 14 August 2020
   

5. Study Concerning the Correspondence Between Optical Materials and Optical Coatings Using Matlab

   Optical coatings generally consist of thin films made up of single or multiple layers of either metallic or dielectric materials. When properly...

   Dana Rizescu, Ciprian Ion Rizescu in Innovations in Mechanical Engineering II

   Conference paper 2023
   

6. Polydimethylsiloxane (PDMS) Coated Broadband Tunable Vanadium Dioxide (VO₂) Based Linear Optical Cavity Temperature Sensor

   Silicon on insulator (SOI) based sensors provide a reasonable solution to the issues common in traditional linear optical cavities such as wavelength...

   Rana M. Armaghan Ayaz, Adil Mustafa in Sensing and Imaging

   Article 26 February 2024
   

7. Machine Setup

   In this chapter, the machine setup for additive manufacturing is addressed. This includes both the available material classes and a comparison of the...

   Roland Lachmayer, Tobias Ehlers, René Bastian Lippert in Design for Additive Manufacturing

   Chapter 2024
   

8. Micro-/Nano-technology in the Automotive Industry: A Review

   In recent decades, micro and nanotechnology have received increasing attention with a multitude of applications across disciplines. These...

   Kanakasabapathi Subramanian, Vijay Bhooshan Kumar in Transactions of the Indian National Academy of Engineering

   Article 25 April 2024
   

9. Manufacturing

   The very high surface/volume ratio of human lungs (attributable to the presence of hundreds of millions of tiny alveoli) facilitates efficient gas...

   Alan E. Rubin in Surface/Volume

   Chapter 2023
   

10. Reflective-to-absorptive THz switchable bifunctionality through phase transition of vanadium dioxide in a 1D defective photonic crystal microcavity

    The terahertz (THz) absorption features are theoretically investigated in a symmetric one-dimensional photonic crystal hybridized with a vanadium...

    Arezou Rashidi in Journal of Computational Electronics

    Article 10 January 2023
    

11. Measurements of Dielectric Lined Waveguides for Low Loss Millimeter Wave and Terahertz Transmission

    By coating the inside of an overmoded, smooth wall metallic waveguide with a thin dielectric layer, one can obtain similar boundary conditions to...

    Kyle Thackston, John Doane, ... Francis Hindle in Journal of Infrared, Millimeter, and Terahertz Waves

    Article 17 May 2023
    

12. Micro-cutting mechanism of selective laser melting AlSi₁₀Mg containing inside metal particles based on finite element analysis

    Micro-cutting processes, such as single-point diamond turning, are required for selective laser melting (SLM)–fabricated AlSi ₁₀ Mg to machine optical...

    Yifan Wang, Jun Yu, ... Zhanshan Wang in The International Journal of Advanced Manufacturing Technology

    Article 26 August 2023
    

13. Detection and Characterisation of Low Dense Charges Inside Metallic Devices Used in Space Applications by Neutron Radiography

    Neutron radiography (NR) is a non-destructive evaluation method for detecting the presence of hydrogenous and other neutron absorbing compounds...

    Girish N. Namboodiri, M. C. Santhosh Kumar, ... G. Levin in Journal of Nondestructive Evaluation

    Article 01 February 2020
    

14. Features of the Extraction of Metals from Waste in a Solar Furnace

    Abstract

    This paper analyzes the potential for using solar plants based on mirror-concentrating systems in technological processes for processing...

    M. S. Paizullakhanov, O. R. Parpiev, ... L. S. Suvanova in Applied Solar Energy

    Article 01 June 2022
    

15. Sensor-integrated structures in mechanical engineering: challenges and opportunities for mechanical joining processes

    In recent years, the trend to extend the functionality of passive metallic structures in mechanical engineering through sensor integration has...

    Nassr Al-Baradoni, Peter Groche in Production Engineering

    Article Open access 29 January 2022
    

16. Modification of Optical Properties of Amorphous Metallic Mirrors Due to Impact of Deuterium Plasma

    Optical properties of zirconium-based amorphous alloys that were subjected to deuterium plasma treatment have been investigated by the...

    Inna Lyashenko, Vladimir Konovalov, ... Iryna Yurgelevych in Recent Advances in Technology Research and Education

    Conference paper 2019
    

17. MR fluid-based novel finishing process for nonplanar copper mirrors

    The potential use of copper as metallic mirrors in a wide variety of industries has put an onus on producing super-finished surfaces of copper of...

    Zafar Alam, Dilshad Ahmad Khan, Sunil Jha in The International Journal of Advanced Manufacturing Technology

    Article 12 November 2018

18. Machines for Laser Machining

    The term LASER, which is widely used nowadays, is an abbreviation for a physical principle and stands for Light Amplification by Stimulated Emission...

    Christian Brecher, Manfred Weck in Machine Tools Production Systems 1

    Chapter 2024
    

19. Emerging Trends in Additively Manufactured Materials and Novel Flexible/Stretchable Conductor Technologies

    This chapter, Chap. 6 : Emerging Trends in Additively Manufactured Materials and Novel Flexible/Stretchable...

    Arief Suriadi Budiman in Principles of Extreme Mechanics (XM) in Design for Reliability (DfR)

    Chapter 2022
    

20. Nanotechnology for Checking Surface Immobilization

    This chapter is the first of several chapters that address nanotechnology. In the context of this book, the use of nanotech is proposed to both...

    Sandro Carrara in Bio/CMOS Interfaces and Co-Design

    Chapter 2024