Search

Search Results

1. Study of Aluminum–Iron Oxide Composites Obtained by Die Pressing of Industrial By-Products

   In cities in develo** countries, several tons of unprocessed aluminum are buried every day. This is because some kinds of aluminum by-products...

   A. Esguerra-Arce, G. Pinto-Arciniegas, ... J. Esguerra-Arce in JOM

   Article 18 July 2023
   

2. Effect of Heating Rate and Hot Forging Temperature on Phase Formation and Complex Physical and Mechanical Properties of Powdered Iron Aluminide

   Optimizing temperature-kinetic heating conditions is an important component of powder technology. This problem is especially acute in heterogeneous...

   Oleksandra Tolochyna, Oleksandr Tolochyn, ... Igor Okun in JOM

   Article 27 December 2022
   

3. Manufacture, Mechanical Properties and Microstructural Characterization of Aluminium and Iron Metal Matrix Composite Manufactured

   The objective of the present work is to investigate the formation of intermetallic compounds such as iron aluminides and oxides during the formation...

   D. Arthur Jebastine Sunderraj, D. Ananthapadmanaban, ... A. John Rajan in Trends in Manufacturing and Engineering Management

   Conference paper 2021
   

4. Development and characterization of an iron aluminide coating on mild steel substrate obtained by friction surfacing and heat treatment

   Iron aluminides are intermetallic Fe–Al alloys known for their high temperature corrosion and oxidation resistance, which makes them candidate...

   Fernanda D. Troysi, Pedro P. Brito in The International Journal of Advanced Manufacturing Technology

   Article 31 October 2020
   

5. Insights in improvement in wear behavior of titanium aluminide super alloy: effect of iron addition synthesized by spark plasma sintering

   Wear behavior of titanium alloys of Ti-4.5wt%Al + xFe (x: 2,4,6,8) produced by spark plasma sintering was investigated in order to highlight the...

   Sylvester Afamefuna Anioke, Daniel Oray Nnamdi Obikwelu, Victor Sunday Aigbodion in The International Journal of Advanced Manufacturing Technology

   Article 06 October 2022
   

6. Oxidation Behaviour of Fe-28Al-5Si at.% Alloyed with Ti and Mo

   The high-temperature oxidation behaviour of Fe-28Al-5Si, Fe-28Al-5Si-2Mo and Fe-28Al-5Si-2Ti (in at.%) was investigated. Cyclic oxidation tests of...

   Adam Hotař, Věra Vodičková, ... Stanislav Daniš in JOM

   Article Open access 17 May 2024
   

7. Phase Composition of Cast Intermetallic Fe–Al Alloys Produced by Self-Propagating High-Temperature Synthesis

   Abstract

   The production of cast intermetallic Fe–Al alloys by self-propagating high-temperature synthesis from composites consisting of aluminum wire...

   N. N. Safranov, L. R. Kharisov, D. R. Idiyatullin in Russian Engineering Research

   Article 01 February 2024
   

8. Development of Heat-Resistant Composites Based on Al-Mg-Si Alloy Mechanically Alloyed with Aluminide Particles

   Zr and Ti are important alloying elements for heat-resistant aluminum alloys due to the formation of the L1 ₂ aluminide phases which have...

   A. S. Prosviryakov, A. I. Bazlov, A. V. Mikhaylovskaya in JOM

   Article 28 November 2023
   

9. Study on the Compressibility of TiAl48-2-2 Powder Mixed with Elemental Powders

   Many metallic powder materials can be processed fast and cost-effectively using the conventional powder metallurgy method. For this purpose, the...

   A. Heymann, J. Peddinghaus, ... B.-A. Behrens in Production at the Leading Edge of Technology

   Conference paper 2023
   

10. Advances in Sintering of Titanium Aluminide: A Review

    Titanium aluminides (TiAl) are prominent advanced materials for aerospace and automobile industries owing to their great engineering properties...

    M. R. Mphahlele, P. A. Olubambi, E. A. Olevsky in JOM

    Article 24 January 2023
    

11. Effect of Ti-Zr Ligature on Microstructure and Mechanical Properties of Automotive Silumin

    Complex processing increases the mechanical and technological properties of secondary aluminum alloys, including refining and modification processes....

    Kristina Berladir, Tetiana Hovorun, ... Yuliia Denysenko in Advanced Manufacturing Processes IV

    Conference paper 2023
    

12. Investigation of the Surface Degradation Properties of Aluminized Super Austenitic Stainless Steel

    The intermetallic compounds formed on the surface of a substrate via the aluminizing process significantly affect its hardness and oxidation...

    Kadir Mert Doleker, Azmi Erdogan, Tuba Yener in JOM

    Article 23 October 2023
    

13. Development of Multi-Functional Coating for Ferritic Steels Using Cathodic Plasma Electrolytic Nitriding

    Cathodic plasma electrolytic nitriding (c-PEN) technique has been utilized to modify a low-alloy ferritic steel (2.25Cr-1Mo) surface and assess the...

    Ramachandran Chellappandian, Geetisubhra Jena, ... Ilaksh Adlakha in JOM

    Article 13 July 2023
    

14. In situ processing aluminide coatings with and without tungsten carbide

    Alloying elements have been added to β-NiAl to improve strength and creep resistance at high temperature enhancing β-NiAl attractiveness and...

    Heber O. Abreu-Castillo, Bruno P. Bueno, Ana Sofia C. M. d’Oliveira in The International Journal of Advanced Manufacturing Technology

    Article 03 November 2021
    

15. Characterization of Hot-Dip Aluminized C45 Carbon Steel before and after Cyclic Heating in Air

    Abstract

    An experimental study has been carried out on the surface characteristics of hot-dip aluminized (HDA) C45 carbon steel. The coated specimens...

    Hawkar J. Muhammed, Márton Benke, ... Tamás I. Török in Surface Engineering and Applied Electrochemistry

    Article 01 July 2021
    

16. Micro-Abrasive Wear Behavior Study of an Intermetallic Material—Fe–30Al–6Cr (at.%) Under Conditions of Room and Moderate Temperatures: A Comparison

    Present work focus on research of tribological resistance of an intermetallic material (Fe–30Al–6Cr—at.%), seeking correlations between wear volume,...

    Eduardo K. T. M. Silva, Jorge H. Luna-Domínguez, ... Ronaldo Câmara Cozza in Proceedings of the 8th International Conference on Fracture, Fatigue and Wear

    Conference paper 2021
    

17. Mechanical behavior of TiAl alloys

    Intermetallic TiAl alloys attract much attention in advanced engineering fields due to their low density (3.9–4.2 g/cm ³ ) and excellent...

    HengGao **ang, Yang Chen, ... Guang Chen in Science China Technological Sciences

    Article 24 April 2023

18. Effect of laser alloying with CoNiCrW powder on the properties of the AlSi7Mg surface layer

    The surface of the AlSi7Mg alloy was alloyed with CoNiCrW powder using a continuous wave fiber laser with a wavelength of 1.07 μm. The thickness of...

    Natalia N. Soboleva, Natalia A. Davydova, ... Svetlana A. Rogovaya in The International Journal of Advanced Manufacturing Technology

    Article 16 May 2024
    

19. Optimization of process parameters for the development of Ni–Al-Ti-Mn-Co-Fe–Cr high entropy alloy system via spark plasma sintering

    A novel equal atomic Ni–Al-Ti-Mn-Co-Fe–Cr high entropy alloy (HEA) was developed via the spark plasma sintering (SPS) process. This study...

    Emmanuel Olorundaisi, Bukola Joseph Babalola, ... Peter A. Olubambi in The International Journal of Advanced Manufacturing Technology

    Article Open access 31 March 2023
    

20. Microstructure Evolution in Medium Mn, High Al Low-Density Steel During Different Continuous Cooling Regimes

    The objective of the present work is to investigate the microstructure evolution in Fe-12 Mn-13 Al-4.8 Ni-0.8 C wt.% steel after two-phase heat...

    Biraj Kumar Sahoo, Suman Sadhu, ... S. G. Chowdhury in Recent Advances in Manufacturing Processes

    Conference paper 2022