Search
Search Results
-
Morphologies of intermetallic compound phases in Sn-Cu and Sn-Co peritectic alloys during directional solidification
The morphologies of intermetallic phases (IMCs) during directional solidification of the Sn-Cu (L+Cu 3 Sn→Cu 6 Sn 5 ) and Sn-Co (L+CoSn→CoSn 2 ) peritectic...
-
Microstructure and Mechanical Properties of AlCoCrFeNi High-Entropy Alloy-Reinforced Ti-Al Metallic-Intermetallic Composites
In this study, a novel high-entropy alloy-reinforced Ti-Al metallic-intermetallic laminated (HEA-MIL) composite was fabricated using vacuum hot...
-
Method for Producing an Intermetallic Precursor Layer for Microarc Oxidation
AbstractFor the first time, a promising method for protecting the surface of metals and alloys from external high-temperature effects is proposed and...
-
Phase Composition of Cast Intermetallic Fe–Al Alloys Produced by Self-Propagating High-Temperature Synthesis
AbstractThe production of cast intermetallic Fe–Al alloys by self-propagating high-temperature synthesis from composites consisting of aluminum wire...
-
Magnetocaloric Effect and Magnetic Properties of the Intermetallic Compound Mn5Ge3: Ab Initio Calculation and Monte Carlo Simulation
The Magnetocaloric effect (MCE) is a physical phenomenon that occurs in magnetic materials under the influence of a varying magnetic field. Is it... -
Preparation of Fe3Si and FeSi intermetallic compounds from copper slag by electrochemical method
Fe 3 Si and FeSi intermetallic compounds were prepared by CaCl 2 –NaCl melt electrolysis at 800 °C from the non-magnetic copper slag compound. The phase...
-
Effect of Sn-xCu Solder Alloy onto Intermetallic Formation After Laser Soldering
The awareness of lead-free solders can be attributed to their environmental and human-health related benefits. Due to this consciousness, research... -
Effect of ex situ Al3Zr intermetallic on cold and hot wear behaviors and mechanical properties of FSPed surface hybrid nanocomposite of high-strength aluminum matrix
The extraordinary mechanical properties of AA7075-T6 alloy are comparable to that of steel, but its low hardness, high wear rate at room and high...
-
Facets Formation of Ag3Sn Intermetallic in Sn-Bi-Ag Alloys: An EBSD and First-Principles Study
Ag 3 Sn intermetallic growth within Sn-Bi-Ag alloys during relatively slow cooling rates has a pronounced effect on the performance and reliability of...
-
Effect of SiO2 nanoparticle addition on growth of interfacial Ag3Sn intermetallic compound layers between lead-free solder and silver conductor
This study investigated the effects of silver powder modification on intermetallic compound (IMC) formation and silver leaching during soldering at...
-
Weld Microstructural Image Segmentation for Detection of Intermetallic Compounds Using Support Vector Machine Classification
Weld microstructural images reveal information of presence of intermetallic compounds (IMC) and IMC layer width in the weld region. This is an... -
Grindability of γ-TiAl intermetallic compounds during ultrasonic vibration-assisted high efficiency deep grinding process
Gamma titanium-aluminum intermetallic compounds ( γ -TiAl) have an important application significance in the field of aero-engines owing to their...
-
Effect of Mg and Si on intermetallic formation and fracture behavior of pure aluminum-galvanized carbon-steel joints made by weld-brazing
Commercial pure aluminum and galvanized carbon steel were lap-welded using the weld-brazing (WB) technique. Three types of aluminum filler materials...
-
Improvement in mechanical and microstructural properties of novel TA7/Nb/Cu/SS304 composite joints by reducing intermetallic compounds
The joining of titanium and stainless steel is challenging with conventional filler metals due to the formation of Fe-Ti intermetallic compounds...
-
Formation of Intermetallic Compounds in Al–Cu Interface via Cold Roll Bonding: Review
AbstractThe composites consisting of similar or dissimilar metallic layers with different physical properties are vastly applicable. Among various...
-
Characterisation and Modelling of Intermetallic Phase Growth of Aluminium and Titanium in a Tailored Forming Process Chain
The combination of aluminium (AlSi1MgMn) and titanium (Ti6Al6-4V) allows producing components with high lightweight potential and at the same time... -
Hybrid joining of cast aluminum and steel by compound casting and friction stir welding
For structural components in the vehicle body, a trend can be observed where components such as suspension struts or side members in differential...
-
Effects of Intermetallic Evolution by Electrically Assisted Rapid Heat Treatment on the Mechanical Performance and Formability of Aluminum Clad Steel
Aluminum clad steel (ACS) sheets are heat treated by electrically assisted rapid heat treatment (subsecond duration) to balance their strength and...
-
Inverse Magnetocaloric Effect in Mn5Si3 Compound
AbstractA direct method was used to study the magnetocaloric effect (MCE) for samples of the compound Mn 5 Si 3 under adiabatic conditions in magnetic...
-
Effect of HEA/Al composite interlayer on microstructure and mechanical property of Ti/Mg bimetal composite by solid-liquid compound casting
In this study, HEA/Al composite interlayer was used to fabricate Ti/Mg bimetal composites by solid-liquid compound casting process. The Al layer was...