Search
Search Results
-
Research on cutting performance and processing surface quality of micro-structured composite-coated tool: a comprehensive review
The modern manufacturing industry is inextricably linked to the development of advanced manufacturing technology. Especially in the energy chemical...
-
Optimization of cutting force during turning of custom 450 steel using TiAlSiN coated WC tool inserts
Custom 450 steel exhibits superior machinability attributed to its optimized microstructure, promoting smoother material removal and decreased tool...
-
Performance analysis and optimization of machining parameters using coated tungsten carbide cutting tool developed by novel S3P coating method
The motivation of research in modern manufacturing systems demands the least expensive operations to produce the best quality products. To achieve...
-
Cutting Tool Materials
The cutting tool materialCutting tool materials, cutting parameters and the selected tool geometry directly influence the productivity of the...
-
Investigation of Thermal Phenomena During Cutting with a Multi-coated Tool
Theoretical and experimental research of thermal phenomena during blade cutting machining by tools with multilayer composite coatings has been...
-
Finite element investigation of cutting performance of Cr/W-DLC/DLC composite coated cutting tool
DLC has been applied as coating material in the machining of difficult-to-cut materials, and shows a good cutting performance. In this study,...
-
Evaluation of milling performance of 50-ÎĽm D-shaped carbide tool, polycrystalline diamond-coated carbide tool, and polycrystalline diamond tool
Tool sizes and material properties significantly influence the surface quality of micro grooves and the life of the milling tool in micro milling....
-
Influence of microgroove cutting tool on cutting energy and cutting performance during turning of Inconel 718
In this study, an original cutting tool (OCT) for machining nickel-based superalloy Inconel 718 is selected, and a microgroove is designed on its...
-
Tool vibration, surface roughness, cutting power, and productivity assessment using RSM and GRA approach during machining of Inconel 718 with PVD-coated carbide tool
Nickel-based alloys such as (Inconel 718) are widely used in the fields of space technology, rocket engines, nuclear reactors, petrochemicals,...
-
Cutting performance of a tool with continuous lubrication of atomized cutting fluid at the tool-chip interface
To improve the tool lubrication performance and reduce the use of cutting fluid as much as possible, a new type of tool with continuous lubrication...
-
Cutting performance and machining economy of the hard cutting tools in clean cutting of hardened H13 steel
The problems of tool wear and machining economy are prominent in hard cutting process. Clean cutting technology can effectively improve the cutting...
-
Influence of tool micro-texturing and AlCrN coating on cutting performance in dry turning AISI 304
The primary cause of tool failure in rough cutting is the severe tool-chip friction brought on by chip adhesion and abrasive wear. To address the...
-
Tool wear characteristics of interrupted-cutting Zr-based bulk metallic glasses with cemented carbide tool
The tool wear characteristics and mechanisms were investigated during interrupted-cutting Zr-based bulk metallic glass (BMG). The effect of tool wear...
-
Understanding the influence of tool coating and cutting environment on the machinability of Nimonic C-263
Nimonic C-263 is subjected to machining difficulties due to their distinctive characteristics such as limited thermal conductivity, and the tendency...
-
Box–Behnken based investigation of surface quality and tool wear rate and FEM analysis of tool wear in TiAlN/CrN coated carbide tool
The quantitative effects of cutting speed, feed and depth of cut on surface quality of the turned 316 LVM stainless steel work piece and tool wear of...
-
Experimental Investigations and Multiobjective Optimization in Machining of INCONEL X750 Superalloy Using Cryogenically Treated PVD-Coated Tool
The machining of Inconel X750 is challenging due to its high cutting forces and limited heat conductivity. This study investigated the influence of...
-
Three-Dimensional Measurement and Finite-Element Simulation for Tool Wear Estimation in Cutting of Inconel 718 Superalloy
As the application of nickel-based heat-resistant alloy, a difficult-to-cut material, increases in aerospace engine, gas turbine and automotive...
-
The effect of chip formation on the cutting force and tool wear in high-speed milling Inconel 718
Coated carbide tools are widely used in the processing of nickel-based superalloys due to their excellent wear resistance, high strength, and good...
-
A review of automated cutting tool selection methods
The selection of appropriate cutting tool (CT) is a critical part of machining. Selecting the right tool for the right job will enable customers to...
-
Cutting performance and surface quality of Ti-6Al-4V by longitudinal ultrasonic vibration-assisted high-speed dry milling with coated carbide tools
Longitudinal ultrasonic vibration-assisted high-speed dry milling (LUVAHSDM) is adopted to improve the cutting performance and surface quality of...
