Search
Search Results
-
Laser-induced selective wettability transition of 6061 aluminum alloy surfaces
Laser texturing enables site-selective tailoring of wetting characteristics of metallic surfaces, converting the surfaces into hydrophilic or...
-
Effect of rotational speed and feed rate on microstructure and mechanical properties of 6061 aluminum alloy manufactured by additive friction stir deposition
Additive friction stir deposition (AFSD) is attractive for its ability to create freeform and fully dense structures without melting and...
-
Study on the Impact Energy of Aluminum 6061 and Aluminum 7075 at Different Heat Treated Condition
Charpy impactImpact test is used to evaluate the toughness and impactImpact resistance of a material under sudden impactImpact loading. This study...
-
Wear resistance of hard anodic coatings fabricated on 5005 and 6061 aluminum alloys
The wear resistance of hard anodic coatings fabricated on 5005 and 6061 aluminum alloys was determined. The Taber abrasion test, ball-on-disc...
-
Elevated Temperature Tribological Performance of Submicron Alumina Particle-Reinforced 6061 Aluminum Alloy Under Dry Conditions
Tribological behavior of aluminum (Al) 6061 alloy reinforced with 20% submicron (0.7 μm) alumina (Al 2 O 3 ) particles was evaluated under dry conditions...
-
Toward clean manufacturing: an analysis and validation of a modified Johnson–Cook material model for low and high-speed orthogonal machining of low-carbon aluminum alloy (Al 6061-T6)
In this research, sustainable machining of the aluminum alloy (Al 6061-T6) is considered. Aluminum is a durable and infinitely recyclable material as...
-
Comparative Study of Electrically Assisted Pressure Joining of Aluminum 6061-T6 Alloys and Copper C11000 Alloys
This study compares the electrically assisted pressure joining (EAPJ) performances of two non-ferrous alloys, aluminum (Al) 6061-T6 and copper (Cu)...
-
Coupling effect of micro-textured tools and cooling conditions on the turning performance of aluminum alloy 6061
Micro-texturing has been widely proven to be an effective technology for achieving sustainable machining. However, the performance of micro-textured...
-
Employing Aluminum Matrix Composite for Stir Casting Process for Investigating the Performance of A1-6061
Over the past few years, aluminum 6061 alloys are considered one of the most versatile heat-treated alloys because of their maximum superior strength...
-
The relationship between adhesion morphology and cutting force in orthogonal cutting of 6061-T6 aluminum alloy
Due to the sticky and soft characteristics of aluminum alloy, it is easy to form adhesion on the tool rake face during cutting process. In this work,...
-
The effect of laser segmented skip welding on welding distortion and residual stress in butt weld of 6061 aluminum alloy thin plate
In the present work, welding heat distribution state and its influence on welding deformation were investigated by adjusting the laser welding...
-
Microstructure and mechanical properties of 6061 aluminum alloy laser-MIG hybrid welding joint
In this paper, 3 mm 6061 aluminum alloy sheets were welded by laser MIG hybrid welding. Based on the experiment, the best welding parameters were...
-
Influence of rotation speed on interfacial bonding mechanism and mechanical performance of aluminum 6061 fabricated by multilayer friction-based additive manufacturing
Friction-based additive manufacturing processes that allow the free design of the deposition path are expected to be used for the rapid production of...
-
Grey based Taguchi method for multi-response optimization of FSW of aluminium AA 6061 alloy
Research presented an experimental investigation to determine the optimal parametric setting during friction stir welding (FSW) of Aluminium AA 6061...
-
Process parameters optimization of bobbin tool friction stir welding on aluminum alloy 6061-T6 using combined artificial neural network and genetic algorithm
Bobbin tool friction stir welding (BT-FSW) is a special variant of solid-state conventional friction stir welding (C-FSW) but it is capable of...
-
ANFIS-TLBO-based optimization of drilling parameters to minimize burr formation in aluminum 6061
This research paper presents an experimental investigation conducted on a radial drilling machine, focusing on burr formation on aluminum 6061...
-
Mechanical Properties of the Dissimilar Friction Stir Welding Between Pure Copper and Aluminum Alloy 6061
Pure copper C1100 plate and aluminum alloy 6061 plates with the same thickness of 5 mm were joined by friction stir welding. The joints were...
-
Friction Stir Powder Additive Manufacturing of Multi-track Depositions of Al 6061 Alloy for Cladding and 3D Printing Applications
This study explores friction stir powder additive manufacturing of multi-track single-layer (MTSL) and multi-track multi-layer (MTML) depositions of...
-
Numerical simulation of thermomechanical behavior and mechanical property in HRFSW of Aluminum Alloy
High-rotational-speed friction stir welding (HRFSW) has gained significant attention in the field of friction stir welding due to its numerous...
-
Effect of weld geometry on fatigue performance of 6061-T6 aluminum GMAW: part 1. Butt joint
The use of aluminum in automobile bodies has increased in recent years due to its various advantages. However, the research conducted on the fatigue...