Search
Search Results
-
Homogenizing interfacial shear stress in brick-and-mortar structured composites via gradient modulus for enhanced mechanical properties
Inspired by nature, various biomimetic materials have been synthesized for enhanced mechanical properties, among which composites with...
-
DEM investigation of strength and critical state behaviours of sand under axisymmetric stress paths with different shearing modes
This paper investigates the strength and critical state (CS) behaviours of sand under axisymmetric stress paths with different shearing modes using...
-
Deterioration of compressive properties of coal rocks under water and gas coupling
The compressive properties of coal under water-gas coupling were studied based on the water-rock-gas coupling test system. The compressive strength...
-
Rare earth modified reduced graphene oxide reinforced AgCuTi composite brazing filler for brazing C/C composites
In order to solve the formation of brittle compounds in brazed joints, an innovative rare earth modified reduced graphene oxide reinforced AgCuTi...
-
Anisotropy in shear-sliding fracture behavior of layered shale under different normal stress conditions
Shear-sliding mode (mode II) fracture of rocks is a vital failure form in deep underground engineering. To gain deep insight into the anisotropic...
-
Experimental study on the shear behavior of grout-infilled specimens and micromechanical properties of grout-rock interface
The grout-rock interfacial property is one of the key factors associated with the strength of grouted rock masses. In this study, direct shear tests...
-
Brazing of C/C composites and 304 stainless steels via Ni/Mo composite interlayer
In order to improve the strength of C/C composites and 304 SS brazed joint, two substrates were brazed by adding metal interlayers (Ni, Mo, Ni/Mo) to...
-
Aeroelastic model of flexible blades of wind turbines under complex wind speed profiles
With the increasing size of wind turbines, the inflow conditions are also becoming more and more complex, and the rotor speed and blade-pitch angle...
-
Performance of interface between TRC and existing concrete under a chloride dry-wet cycle environment
Textile-reinforced concrete (TRC) is suitable to repair and reinforce concrete structures in harsh environments. The performance of the interface...
-
Effects of osteocyte orientation on loading-induced interstitial fluid flow and nutrient transport in bone
Changes in osteocyte spatial arrangement and orientation that are associated with aging and certain bone diseases have attracted much attention. The...
-
Plastic deformation of magnesium single crystal: a crystal plasticity coupled twinning phase field simulation
A crystal plasticity coupled twinning phase field (CP-TPF) model was developed to investigate the plastic deformation of magnesium (Mg) single...
-
Degradation of joint surface morphology, shear behavior and closure characteristics during cyclic loading
In order to investigate the failure mechanism of rock joint, a series of laboratory tests including cyclic direct shear tests under constant normal...
-
Effect of flushing on the detachment of biofilms attached to the walls of metal pipes in water distribution systems
Biofilm detachment caused by flushing can result in secondary contamination in drinking water distribution systems (DWDSs). To evaluate the impact of...