Search
Search Results
-
Tribomechanical investigation and parametric optimisation of the cutting performance of Ni-based hardfaced turning tool insert
The prime objective of the current study is to illustrate not only the tribomechanical properties of hardfaced deposit but also the parametric study,...
-
Dry turning of SiCp/Al matrix composites with a wide range of particle volume fractions: tool wear characteristics analysis of multi-coated tool
Understanding tool wear characteristics in machining SiC particle–reinforced aluminum matrix (SiCp/Al) composites is crucial for tool structure...
-
Investigation of cryo-treatment on hardness and XRD profile of WC and AlTiN coated inserts
The recent trend in the machining industry is moving towards dry cutting by considering cost and environmental factors. But the dry cutting of...
-
Research on feasible region of specific cutting energy and surface roughness in high-speed dry milling of 30CrMnSiNi2A steel with CVD and PVD coated inserts
Existing researches on coated tools do not provide predicted data about machining performance while exploring their changing rules. Meanwhile, the...
-
Using cutting temperature and chip characteristics with neural network BP and LSTM method to predicting tool life
The die steel NAK80 is used in specular optical molds, deep drawing forming dies, and cold extrusion dies in large quantities; high strength and...
-
Experimental analysis for optimization of process parameters in machining using coated tools
Manufacturers are facing challenges in achieving high productivity and quality in manufacturing through machining. PVD-coated tools can control...
-
Primary Research on Dry Milling of AISI 316L Stainless Steel Using Coated Monolithic Carbide Tools
The paper concerns the problems of dry milling of the AISI 316L stainless steel. In the first part the challenges of dry milling process and problems...
-
Dry finishing turning of AA7075 with binary and ternary nitrides and carbides ceramic-coated tools
This research work focus on dry finishing (turning) of AA7075. Newly, emerging alloy target–based ternary PVD–coated tool inserts are compared with...
-
Modeling and prediction of cutting temperature in the machining of H13 hard steel of multi-layer coated cutting tools
The coating effect on the cutting temperature has long been a hot topic in understanding heat transfer mechanism in machining coated tools, and...
-
Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: comparative machining performance evaluation and economic assessment
This study focuses on comparative machining performance evaluation and economic assessment between recently developed nanocomposite AlTiSiN coating...
-
Effect of Micro Abrasive Slurry Jet Polishing on Properties of Coated Cemented Carbide Tools
Owing to the popularization of coating technology, physical Vapor Deposition (PVD) coated tools have become indispensable in the cutting process....
-
Study on tool wear and cutting performance of CFRP for inclined angle milling
Carbon fiber reinforced plastic (CFRP) has been widely used in aviation, aerospace, automotive, and other fields due to its advantages of high...
-
Evaluation of trade-off between cutting time and surface roughness robustness regarding tool wear in hard turning finishing
This study proposes a robust optimization strategy to analyze the trade-off between the conflicting objectives of minimizing the cutting time and the...
-
Low-temperature plasma hardening impact on the properties of the surface layer of the cutting tool working part
Treatment of the cutting tool with a low-temperature plasma gas discharge formed by the interaction of microwave electromagnetic and electrostatic...
-
An assessment of tool life in drilling of Inconel 718 using cathodic arc PVD coated carbide bits
The study investigates the performance of TiN and TiAlN coated carbide tools to improve the tool life in the limited explored drilling operation of...
-
Analytical prediction of transient and steady cutting temperature distributions in coated tools under time-varied heat sources
The generated heat sources during cutting dynamical process are varied with the cutting time, which causes the time-varied cutting temperature...
-
Effects of tool materials and cutting conditions in turning of Ti-6Al-4V alloy: statistical analysis, modeling and optimization using CoCoSo, MABAC, ARAS and CODAS methods
In light of its exceptional physical and mechanical properties, Ti-6Al-4V may be considered one of the more difficult titanium alloys to machine and...
-
The performance of advanced cutting tools used for dry machining of aluminium
This study aims to evaluate the performance of different cutting tools and their influence on the machining process of rolled aluminium. Eight...
-
Study on machinability of Ti6Al4V with coated inserts–cutting force, surface finish and material removal rate prediction using ANN
Titanium alloys are known for their potentiality to withstand extreme environmental conditions. However, due to its higher fabrication and...
-
Coated CBN cutting tool performance in green turning of gray cast iron EN-GJL-250: modeling and optimization
The present research investigates the performance of a TiN/PVD-coated CBN7050 tool when turning the gray cast iron EN-GJL-250. This is performed...
