Search
Search Results
-
Effect of interlayer materials on microstructure, hardness and corrosion resistance of an electromagnetic welded titanium–stainless steel interface
Electromagnetic welding, also referred to as magnetic pulse welding, is a solid-state welding method utilized for joining two distinct materials...
-
Homogenization of the interfacial bonding of compound-cast AA7075/6060 bilayer billets by co-extrusion
A process chain of compound casting and co-extrusion of AA7075/6060 bilayer billets is introduced to manufacture hybrid components with strength in...
-
Direct Preparation of Aluminum-Vanadium Intermediate Alloy Through Electrolysis in Na3AlF6-K3AlF6-AlF3-NaVO3 Molten Salts
The preparation of aluminum-vanadium (Al-V) intermediate alloys through the electrolysis of NaVO3NaVO in the Na3AlF6-K3AlF6-AlF3 molten saltMolten... -
Influence of Reduction and Annealing Temperature on the Interface Characteristics of Al/Cu Laminated Composite Plates in RHR
Al/Cu laminated composite plates were prepared using rolling with a heated roll method, and after rolling the interface morphology, phase, and...
-
Microstructure and mechanical properties of Ti/Al/Ti clad plates prepared via powder-in-tube method
The Ti/Al/Ti clad plates exhibit a broad spectrum of potential applications. However, the conventional techniques of hot-pressing composite and...
-
Experimental and simulation studies on explosive welding of AZ31B-Al 5052 alloys
In this study, a numerical model was developed using the Smoothed Particle Hydrodynamics (SPH) method in ANSYS-Autodyn-2D to investigate the bonding...
-
Effect of Ce Substitution with La and Nd on Microstructure and Mechanical Properties of Al11Ce3
The study investigates the microstructure and mechanical properties of five cast, coarse-grained intermetallic alloys: binary Al11Ce3 and Al11La3,... -
Study of Dissimilar Laser Welding: A Review
Laser beam welding (LBW) is an advanced welding technique having high-power density and a small focal spot that has been widely applied to join... -
Effect of vertical and horizontal zinc interlayer on material flow, microstructure, and mechanical properties of dissimilar FSW of Al 7075 and Mg AZ31 alloys
The objective of present research work is to improve the joint strength of dissimilar FSW of Al and Mg alloy. The method used for joining Al and Mg...
-
Multi-objective optimization and characterization of AA2219-T87 and AA6061-T6 dissimilar friction stir welded joints under the effect of copper backing using AUGMECON
Friction stir welding (FSW) of AA2219-T87 and AA6061-T6 is carried out under six process parameters: rotational speed, tool profile, welding speed,...
-
Effects of reinforcements in Al 5052 and AZ31B explosively weld composites
In this study, aluminium (Al 5052)/magnesium (AZ31B) composites were fabricated with and without wire mesh (SS 304) and different amounts of silicon...
-
The Microstructure and Properties of In25Pb75 Solder Joints During Aging and Temperature Cycling Test
Compared with Sn-based solders, the In-Pb solders have better fatigue resistance. The great advantage of In-Pb solders is that gold dissolves more... -
A Review on Advances in Friction Welding of Dissimilar Metals
Friction welding is classified as one of the most definitive and cost-effective processes when it comes to welding different materials. Solid State... -
Electrochemical Phase Formation of Metals and Alloys at Chemically Identical Solid or Liquid Cathode: Part 3. Alloys in the Form of Intermetallic Compounds
Abstract —In order to provide further evidence on the existence of the phenomenon of electro-chemical phase formation in metals and alloys via a...
-
Comparative Study on Metallography and Mechanical Properties of Al–Cu–Ni/FeNb Composites Fabricated by Electromagnetic Stir Casting Processes via Sand and Metal Mold System
A systematic comparative correlation between the as-cast microstructure and mechanical properties of Al5Cu2Ni/ x FeNb ( x = 1, 3, and 5%) composites is...
-
Effects of Fe Do** on Preparation of Ti-Si Porous Membrane via In Situ Reactive Process
Asymmetric porous filter elements can reach a high filtering accuracy with a larger filtration flux, which can enhance the filtration efficiency and...
-
Structural characteristics and corrosion properties of Cu/Sn–Pb composite produced by accumulative roll bonding process
Cu/Sn–Pb multilayer composite was fabricated by accumulative roll bonding (ARB) technique and its structural, mechanical, and corrosion properties...
-
Investigate the Quality of the Resistance Spot Welding Joint Between Aluminum Alloy and Low Carbon Steel
Welding joint between aluminum and steel is increasingly used in many different fields such as automobile manufacturing, construction, home... -
Interface characterization and formation mechanism of Al/Ti dissimilar joints of refill friction stir spot welding
In recent years, lightweight structures have been widely used in aerospace field. Refill friction stir spot welding has been widely used in...
-
Effect of heat treatment parameters on microstructure evolution, tensile strength, wear resistance, and fracture behavior of Ni–Ti multilayered composites produced by cross-accumulative roll bonding
The last decades have seen a huge growth in the investigation of intermetallic compounds at the interfaces of laminated composites due to their...