Search
Search Results
-
Thermal analysis in 3-D simulation of thin-film ZnO/MoS2/Si solar cells
ZnO and MoS 2 thin-film solar cells hold immense research potential due to their unique and exceptional photoswitching characteristics and piezotronic...
-
Method for the Iterative Refinement of Parameter Values in Analytical Models of Microelectronic Devices Based on Integrated MOS Transistors
AbstractPhysical models of MOS transistors used in the design of modern integrated circuits are typically accurate, which makes it possible to model...
-
Design of a Power-Performance-Area (PPA) Optimized MOS Current Mode Logic Pre-scaler
This work presents a design of a power-performance-area optimized MOS current mode logic pre-scaler. The divide-by-3 pre-scaler is realized in TSMC...
-
Study of the Sensitive Region of a MOS Transistor to the Effects of Secondary Particles Arising from Ionizing Radiation
AbstractIt was shown in [1, 2] that the dependence of the fault tolerance of a static RAM cell on the energy of secondary particles resulting from...
-
Comparative Performance Analysis of Gr and MoS2 Solid Lubricants During High-Temperature Dry Sliding Wear Behavior of Al2618-Based Hybrid MMCs
The effect of solid lubricants, viz. MoS 2 and graphite (Gr) particulate reinforcement, on the dry sliding wear behavior of Al/B 4 C/MoS 2 and Al/B 4 C/Gr...
-
Study on the preparation and fretting behavior of bonded oriented MoS2 solid lubricant coating
The bonded MoS 2 solid lubricant coating is an effective measure to mitigate the fretting wear of AISI 1045 steel. In this work, the amino...
-
Low-power double linearization resistor and diode-connected MOS biasing based non-tailed class AB OTA
The CMOS analog circuit blocks targeted for low frequency applications require linear operational transconductance amplifier (OTA) with stringent...
-
Op-Amps without current mirrors based on depletion-mode p- and n-channel MOS and JFET
The two operational amplifier architectures (Op-Amps) are proposed based on depletion-mode MOS transistors and n-channel junction FET (n-JFET) modes,...
-
Application of MoS2 in the space environment: a review
A considerable portion of space mechanism failures are related to space tribological problems. Cold welding in high vacuum; surface erosion and...
-
A Novel Dual Metal Double Gate Grooved Trench MOS Transistor: Proposal and Investigation
Through this paper, we have propounded and investigated a novel structure of a grooved trench MOS transistor with double gate architecture using TCAD... -
MoS2 reinforced PEEK composite for improved aqueous boundary lubrication
Polyether-etherketone (PEEK) is a corrosion-resistant material that has been widely used in aqueous lubrication. However, its anti-wear performance...
-
Synthesis of flower-like Mn-Co-MoS2 compounds for high-performance asymmetric supercapacitors
This study aimed to intercalate manganese (Mn) and cobalt (Co) ions in molybdenum disulfide (MoS 2 ) to synthesize Mn-Co-MoS 2 compounds using a simple...
-
Aluminum alloy stam** lubricating PVB coating containing MoS2 and PTFE as composite additives
Organic coatings containing solid lubricants effectively prevent contact between recycled aluminum alloy surfaces and molds, thereby preventing...
-
Wear and friction characteristics of ZA-27/MoS2 metal matrix nanocomposites by using response surface methodology
This paper examines the impact of molybdenum disulphide (MoS 2 ) nanoparticles on the tribological characteristics of ZA-27 alloy metal matrix...
-
A Single MOS-Memristor Emulator Circuit
A floating/grounded memristor emulator having a single MOSFET connected to a first-order RC filter with high operating frequency is presented. The...
-
Macro-superlubricity in sputtered MoS2-based films by decreasing edge pinning effect
To date, MoS 2 can only be achieved at microscale. Edge pinning effect caused by structure defects is the most obvious barrier to expand the size of...
-
MoS2 nanoflowers and PEDOT:PSS nanocomposite enabling wearable dual-mode pressure sensors
A versatile sensing platform employing inorganic MoS 2 nanoflowers and organic poly(3,4-ethylene dioxythiophene): poly (styrene sulfonate) (PEDOT:PSS)...
-
Design of Low-Power High Performance SAR Analog-To-Digital Converter Based on MOS Capacitor DAC Structure
In this article, a 5-bit 20 MS/s successive approximation register (SAR) analog-to-digital converter (ADC) with 4.53 bits ENOB and 29.0 dB SNDR is... -
Grinding Characteristics of MoS2-Coated Brazed CBN Grinding Wheels in Dry Grinding of Titanium Alloy
As an important green manufacturing process, dry grinding has problems such as high grinding temperature and insufficient cooling capacity. Aiming at...
-
High-Precision Current-Mode Circuits Based on the MOS Translinear Principle
It is well known that the decrease in dimensions of MOSFETs in IC fabrication technology affects MOSFET performance and the MOSFET V–I relationship...