Search
Search Results
-
Out-of-Plane Vibrations of Plane Frames
The frame vibrations studied in Chaps. 3 to 5 are for in-plane vibrations. If a plane frame acted upon by a force or horizontal ground vibration in...
-
Conical Shells of Linearly Varying Thickness Subjected to Normal Loads
The equilibrium equations for a surface element of a conical shell in the framework of generalized plane stress of linear theory of elasticity are...
-
Vibrations of X-Braced Multi-Story Frames
The study of vibrations for the x-braced portal frames in the last chapter is extended to high-rise x-braced multi-story frames in this chapter....
-
Vibrations of Frames with Inclined Members
The model established for the vibration of the inclined bars in the last chapter now is applied to two- and three-bar frames with inclined members.
-
Vibrations of X-Braced Portal Frames
Because of devastation of structures due to earthquake and wind force, increasing attention has been paid to dynamic responses of braced structures...
-
A Boundary-Layer Solution Verified by Buckling of a Rectangular Plate
The so called edge-zone or boundary-layer solutions are widely used in large dediection problems of thin elastic plates [20,35,36] and shells...
-
Inclined Girders with End Constraint Subjected to Normal Loads
A two-bar truss subjected to lateral normal distributed loads as shown in Fig. 9.1 represents a double leaf miter-type gate used in navigation locks...
-
Two Methods for Analysis of Continuum Mechanics of Elastic Structures
There are two basic methods to analyze the continuum elastic structural mechanics: One is by applying Newton’s law of motion to a free body element...
-
Vibrations of Inclined Bars with End Constraint
Considered are the vibrations of inclined bars with the bottom end flxed in space and the top end having a constraint which requires that this end...
-
Effect of Rotatory Inertia and Shear Deformation on Vibration of Inclined Bars with End Constraint
The effect of rotatory inertia and shear deformation on the vibration of the inclined bar with the end constraint studied in Chap. 2 is examined...
-
Buckling of Conical Shells under a Single Axial Load
The buckling of conical shells subjected to external loads is a classic problem in shell structures. Since the theoretical predications could not...
-
Membrane Vibrations of Conical Shells
The vibrations of conical shells are due to the inertial and external forces acting the transverse, circumferential and meridional directions of the...
-
Buckling of Inclined Columns
The stability of a simple truss subjected to a single force, P, as shown in Fig. 8.1 was investigated by Mises [40] as a basic model to illustrate...
-
Asymptotic Solutions of Conical Shells of Constant Thickness
The solutions of conical shells with linearly varying thickness presented in the last chapter have suggested a new approach to obtain asymptotic...
-
Effect of Forced Convection on the Combustion Chemistry of PMMA Spheres in Microgravity
The influence of the forced convection rate on the chemical structure of a polymethyl methacrylate (PMMA) flame in an oxidizer flow under...
-
A spectral collocation scheme for the flow of a piezo-viscous fluid in ducts with slip conditions
In this paper we present a numerical scheme based on spectral collocation methods to investigate the flow of a piezo-viscous fluid, i.e., a fluid in...
-
Enhancing damage prediction in bulk metal forming through machine learning-assisted parameter identification
The open-source parameter identification tool ADAPT (A diversely applicable parameter identification Tool) is integrated with a machine...
-
A note on structural mode transitions in buckling of radially stretched annular plates
The different approximating assumptions used in deriving models for structural analysis by dimensional reduction of a 3d continuum to structural...
-
Modeling cardiac microcirculation for the simulation of coronary flow and 3D myocardial perfusion
Accurate modeling of blood dynamics in the coronary microcirculation is a crucial step toward the clinical application of in silico methods for the...
-
Energy finite element model for predicting high frequency dynamic response of taper beams
Taper beams are widely used due to its good dam** properties in vibration and noise control field. For dynamic response analysis of taper beams in...
