We are improving our search experience. To check which content you have full access to, or for advanced search, go back to the old search.

Search

Please fill in this field.
Filters applied:

Search Results

Showing 1-20 of 881 results
  1. Optimal retrofit quantity of exterior steel brace methods on minimizing seismic loss for non-ductile reinforced concrete school buildings in Korea

    The brittle shear failure and seismic vulnerability of existing reinforced concrete (RC) school buildings observed during major earthquakes in Korea...

    Insub Choi, DongWon Kim, JunHee Kim in Bulletin of Earthquake Engineering
    Article 16 November 2023
  2. Pin-supported walls as seismic retrofit for existing RC frames: performance improvement through link removal

    Pin-supported (PS) walls represent a possible solution for the seismic retrofit of existing reinforced concrete (RC) buildings, enabling...

    Elena Casprini, Andrea Belleri, ... Simone Labò in Bulletin of Earthquake Engineering
    Article Open access 08 February 2023
  3. Pin-supported walls as seismic retrofit for existing RC frames: feasibility and preliminary design

    The seismic retrofit of the existing building heritage represents an urgent issue to be faced and innovative solutions which allow to overcome...

    Elena Casprini, Andrea Belleri, ... Chiara Passoni in Bulletin of Earthquake Engineering
    Article Open access 06 May 2022
  4. Bi–axially loaded RC beam–column joints and haunch retrofit

    In this study, seismic bi–axially loaded RC beam–column joints are investigated. An experimental campaign on shear–critical corner joints is...

    Marchisella Angelo, Muciaccia Giovanni in Bulletin of Earthquake Engineering
    Article Open access 18 March 2024
  5. Seismic risk assessment of Tehran masonry school buildings and prioritizing them for seismic retrofitting using reliability methods

    This paper aims to evaluate the seismic risk of the masonry school buildings located in the Tehran metropolis over the next 50 years and to...

    Hassan Alimohammadi, Ali Bakhshi, Mohammad Yekrangnia in Natural Hazards
    Article 18 May 2024
  6. Tension-only ideal dissipative bracing for the seismic retrofit of precast industrial buildings

    New precast frame industrial structures are seismically designed according to reliable modern criteria. However, most of the existing built stock...

    Bruno Dal Lago, Muhammad Naveed, Marco Lamperti Tornaghi in Bulletin of Earthquake Engineering
    Article Open access 07 June 2021
  7. Seismic performance evaluation of RC frames strengthened with eccentric steel braces and column jackets

    Existing buildings designed on pre-seismic design philosophy as well as modern construction deficient frames may be susceptible to the effects of...

    Muhammad Shoaib Khan, Ayed Eid Alluqmani in Innovative Infrastructure Solutions
    Article 09 February 2023
  8. Seismic retrofit solutions using base isolation for existing RC buildings: economic feasibilty and pay-back time

    The existing reinforced concrete buildings typical of the Mediterranean area commonly have poor seismic performance and high vulnerability to the...

    Andrea Natale, Ciro Del Vecchio, Marco Di Ludovico in Bulletin of Earthquake Engineering
    Article 27 October 2020
  9. Methodology to incorporate seismic damage and debris to evaluate strategies to reduce life safety risk for multi-hazard earthquake and tsunami

    This paper presents a methodology to evaluate life safety risk of coastal communities vulnerable to seismic and tsunami hazards. The work explicitly...

    Mehrshad Amini, Dylan R. Sanderson, ... Nathanael Rosenheim in Natural Hazards
    Article 09 May 2023
  10. Seismic fragility assessment of bridges with as-built and retrofitted splice-deficient columns

    A significant proportion of existing bridges in high seismic regions were constructed prior to the 1970s. As a result of poor reinforcement...

    Eyitayo A. Opabola, Sujith Mangalathu in Bulletin of Earthquake Engineering
    Article Open access 08 October 2022
  11. A performance-based rehabilitation strategy for RC frame buildings in moderate seismic regions

    Large parts of Asia, Europe, and the eastern USA have high population concentrations in moderate seismic regions (MSR), where very large earthquakes...

    Prakash S. Badal, Ravi Sinha in Bulletin of Earthquake Engineering
    Article 19 March 2024
  12. Seismic fatality risk evaluation framework for existing buildings in Switzerland

    The Swiss code SIA 269/8 for the seismic evaluation of existing structures is risk-based. It relies on the compliance factor α eff , defined as the...

    Safak Arslantürkoglu, Bozidar Stojadinovic in Bulletin of Earthquake Engineering
    Article Open access 07 December 2022
  13. Multimodal seismic assessment of infrastructures retrofitted with exoskeletons: insights from the Foggia Airport case study

    Addressing the seismic vulnerability of infrastructures is critical, especially for those built before the introduction of the current seismic...

    Raffaele Cucuzza, Angelo Aloisio, ... Roberto Nascimbene in Bulletin of Earthquake Engineering
    Article Open access 29 March 2024
  14. Unconventional Retrofit Design of Bridge Pile Groups: Benefits and Limitations

    This paper investigates an example problem of bridge retrofit due to widening, focusing on the foundation. Conventional foundation retrofit is...
    Conference paper 2022
  15. Seismic behaviour of reinforced-masonry aggregate under different types of interaction between adjacent dwellings

    Assessing the seismic vulnerability of existing buildings is an essential task for the management of earthquake disasters. For this purpose, the...

    Sebastian Torres-Olivares, Beatriz González-Rodrigo, ... Juan Carlos Mosquera-Feijoo in Bulletin of Earthquake Engineering
    Article Open access 18 October 2023
  16. Energy based seismic vulnerability assessment tool for reinforced concrete bridges

    Quantification of damage in RC bridges is a key requirement for seismic vulnerability assessment. The main aim of this study is to quantify the...

    Md Shafquat Izhar, Md. Imteyaz Ansari, Mohammad Umair in Bulletin of Earthquake Engineering
    Article 09 July 2024
  17. Proposing new design and retrofitting objectives for seismic design of hospital structures: a case study of Imam Khomeini Hospital in Eslamabad-e Gharb

    This paper compares two methods for retrofitting an existing hospital concrete structure to improve its seismic performance: internal and external...

    Majid Mehrjoo, Seyed Bahram Beheshti Aval in Bulletin of Earthquake Engineering
    Article 04 June 2024
  18. Residential building stock in Serbia: classification and vulnerability for seismic risk studies

    Regional seismic risk assessment is necessary for designing effective seismic risk mitigation measures. In general, such risk assessment studies...

    Nikola Blagojević, Svetlana Brzev, ... Božidar Stojadinović in Bulletin of Earthquake Engineering
    Article Open access 10 April 2023
  19. An improved cable-cylinder bracing system with quarter-ring yielding devices for seismic retrofit of steel moment frames

    This study proposes an innovative hybrid lateral load-resisting system, termed the ring-cable-cylinder bracing system, aimed at improving the energy...

    Oreste S. Bursi, Nader Fanaie, ... Omid Sepasgozar Sarkhosh in Bulletin of Earthquake Engineering
    Article 17 May 2021
  20. Seismic fragility reduction of an unreinforced masonry school building through retrofit using ferrocement overlay

    The Himalayan region is one of the major seismic areas in the world. However, similar to many other seismically active locations, there are...

    Sachin B. Kadam, Yogendra Singh, Li Bing in Earthquake Engineering and Engineering Vibration
    Article 18 April 2020
Did you find what you were looking for? Share feedback.