Search
Search Results
-
Cation-Dipole Interaction-Induced Coacervate Underwater Adhesives in Natural Seawater
Significant progress has been made in wet adhesives for low salinity water, but exploration of general ionic adhesives for natural seawater is less...
-
Calculation of Seawater Density
Abstract —An equation for calculating the density of multicomponent aqueous solutions of electrolytes is proposed and a calculation of the density of...
-
Comparison of continuous flow analysis and ion chromatography for determinations of nitrate, nitrite and phosphate ions in seawater and development of related seawater certified reference materials
Determinations of three nutrients (nitrate, nitrite and phosphate ions) in seawater were investigated by continuous flow analysis (CFA) based on...
-
Cesium-137 Recovery from Seawater by Sorption onto Termoxid Sorbents
AbstractThe results of cesium recovery from seawater with commercially available Termoxid sorbents (Termoxid 35, Termoxid 3A) under laboratory and...
-
Biodegradation of Biodegradable Plastics in Seawater
Biodegradable plastics have been attracting attention since the 1990s, and in recent years there has been growing interest in the development of...
-
Suppression of black powder combustion and explosion using novel green seawater microcapsules
The safety of the military and civilian industries is threatened by the combustion–explosion of energetic materials during production, transport, and...
-
Rock fluid interactions during seawater injection in carbonates: An experimental evaluation on dolomitization and anhydrite precipitation
Carbonates are expected to be reactive during the injection of fluids as a secondary recovery method in an oilfield reservoir. Desulphated seawater...
-
Comparison of dissolved iodine measurements in seawater between inductively coupled plasma mass spectrometry and voltammetry
Two analytical methods, inductively coupled plasma mass spectrometry (ICP-MS) combined with high-performance liquid chromatography (HPLC) and...
-
Fabrication of low-cost USPER nanocomposite membrane for oil/seawater separation
For water purification, various methods are employed nowadays. Among them, filtration is a simple methodology using a membrane. A membrane requires...
-
Determination of Cr and Ni in Seawater by High-Resolution Continuum Source Electrothermal Atomic Absorption Spectrometry
AbstractConditions for the determination of Ni and Cr in seawater by high-resolution continuum source electrothermal atomic absorption spectrometry (
-
Electrolyte-assisted polarization leading to enhanced charge separation and solar-to-hydrogen conversion efficiency of seawater splitting
Photocatalytic splitting of seawater for hydrogen evolution has attracted a great deal of attention in recent years. However, the poor energy...
-
Rapid concentration method for radiocesium in seawater using AMP-PAN resin and sample loading equipment
Here, we present a method for concentrating radiocesium in seawater using ammonium molybdophosphate-polyacrylonitrile (AMP-PAN) resin using...
-
Biodegradation of Lignocellulose-Polyester Composite Films in Freshwater and Seawater Conditions
Develo** biodegradable material alternatives is crucial to address the fossil-based plastic pollution in marine ecosystems. Natural biodegradable...
-
Promoted biodegradation behavior of poly(L-lactic acid) in seawater conditions through blending amorphous polyhydroxyalkanoate
This study investigates the biodegradation behavior of a blend of poly(L-lactic acid) (PLLA) and amorphous polyhydroxyalkanoate (aPHA) (50:50 wt%)...
-
Divalent anion intercalation and etching-hydrolysis strategies to construct ultra-stable electrodes for seawater splitting
Develo** stable electrodes for seawater splitting remains a great challenge due to the detachment of catalysts at a large operating current and...
-
Carbon nanotube-reinforced epoxy composites in seawater: effect of amino-functionalization and post-curing process
Due to their extraordinary properties, functionalized carbon nanotubes (CNTs) have been added to epoxy matrices. In the marine industry, CNT/epoxy...
-
Zinc loaded amidoxime polyacrylonitrile porous resin microcapsules for uranium extraction from seawater
In this study, a microcapsule resin grafted with amidoxime group was prepared by phase transformation method, and the microcapsule resin was loaded...
-
Effects of limestone calcined clay, fly ash and seawater on early hydrating behavior, mechanical properties, microscopic performance and sustainability of eco-friendly cement-based pastes
In some remote areas or islands, the availability of freshwater for infrastructures has encountered a huge shortage, which has prompted more...
-
Study on the galvanic corrosion behavior of copper-nickel/titanium alloys under simulated seawater environment
Titanium alloys have broad application prospects in the field of marine engineering due to their excellent corrosion resistance and comprehensive...
-
Hydrogen Production by Seawater Electrolysis
Hydrogen stands out as a highly promising future energy carrier capable of replacing fossil fuels and mitigating the adverse effects of global...