Search

Search Results

1. Experimental Evaluation of the Influence of Out-of-Roundness of Rotating Pairs on Friction Torque Operating under Dry Friction Conditions

   The article considers the main factors influencing the magnitude and nature of the change in friction torque in rotating pairs and shows the...

   V. A. Avrorov, O. A. Murashkina in Chemical and Petroleum Engineering

   Article 18 March 2021
   

2. Tribological properties of 100% cellulose nanofiber (CNF) molding under dry- and boundary lubrication-conditions at CNF/steel contacts

   Cellulose nanofibers (CNFs), which are plant-derived materials, have recently garnered considerable attention owing to their excellent mechanical...

   H. Okubo, R. Nakae, ... S. Sasaki in Cellulose

   Article Open access 16 June 2023
   

3. A strategy to synthesize phosphorus-containing nickel phyllosilicate whiskers to enhance the flame retardancy of epoxy composites with excellent mechanical and dry-friction properties

   To enhance the fire safety and wear resistance of epoxy, phosphorus-containing nickel phyllosilicate whiskers (FP-NiPS) were synthesized using a...

   Shibin Nie, Zongquan Zhao, ... **ian Yang in Frontiers of Chemical Science and Engineering

   Article 21 January 2024
   

4. Selection of Rational Combination of Antifriction Treatments of Rotating Pairs in Dry Friction Conditions

   The article presents the characteristics of antifriction treatments for pairs of rotation mechanisms of technological equipment operating under dry...

   V. A. Avrorov, O. A. Murashkina, E. A. Sarafankina in Chemical and Petroleum Engineering

   Article 22 March 2021

5. Relationship between Wear Resistance under Dry Friction and Mechanical Properties of Sintered Al–Sn Composites

   Abstract

   The effect of tin-insoluble alloying elements (Zn, Si) on the mechanical and tribotechnical properties of Al–40Sn sintered composites has...

   N. M. Rusin, A. L. Skorentsev, M. G. Krinitsyn in Inorganic Materials: Applied Research

   Article 01 May 2021
   

6. Effect of Silicon Addition on Friction and Wear Behaviour of High Tensile Brasses

   Copper alloys with the main alloying elements Zn, Al, and Ni are well known for their impact, wear, and corrosion resistance. Different fabrication...

   R. Keshavamurthy, Prabhakar Kuppahalli, ... P. Sriram in Silicon

   Article 08 January 2024

7. Operational Properties of Steel Friction Units with Copper-Alloy Antifriction Coating Formed via Electric Spark Alloying

   Abstract

   Improving the operational reliability, durability, and safety of heavily loaded friction units is an urgent problem in physics, chemistry,...

   L. I. Kuksenova, D. A. Kozlov, M. S. Alekseeva in Inorganic Materials: Applied Research

   Article 30 May 2022
   

8. Microstructure Study of Friction Stir Processed Hypereutectic Al-20Si Alloy and Analysis of the Wear Behaviour using Machine Learning Algorithms

   Al–20Si alloy was subjected to friction stir processing to find its effect on the microstructure and wear behaviour. The microstructures of as-cast...

   Mihira Acharya, Animesh Mandal in Silicon

   Article 14 March 2024

9. Sustainable, recyclable, and highly wear-resistant wood matrix as a new paper-based friction material

   Shifting of the preparation strategy of paper-based friction materials from unsustainable to green, environmentally friendly, and recyclable...

   Zhiqiang Shan, **aohua Jia, ... Haojie Song in Cellulose

   Article 09 June 2023
   

10. Effect of the pressing velocity of powdered materials on the product of the external friction and lateral pressure coefficients

    This paper presents the developed mathematical model that describes the influence of pressure and velocity factors on changes in the product of the...

    V. Yu. Arkhangel’skii, I. N. Shestakov, ... E. E. Kazakova in Chemical and Petroleum Engineering

    Article 10 April 2024
    

11. Solutionizing Temperature Effect on the Dry Sliding Wear Performance of Al-7Si-0.3Mg-3Ni Hypoeutectic Alloy

    The solutionizing temperature effect on the dry sliding wear performance of cast T ₆ heat-treated Al–Si–Mg-Ni hypoeutectic alloy is explored in this...

    Vasudev Raveendranath, Aravind Senan V. R, ... Karthik V. Shankar in Silicon

    Article 18 February 2023

12. Comparative Study of the Mechanical and Tribological Characteristics of Fe–Cu–Ni–Sn Composites with Different CrB₂ Content under Dry and Wet Friction

    Abstract

    The structure, phase composition, hardness, and elasticity modulus of sintered Fe–Cu–Ni–Sn–CrB ₂ composites and their tribological properties...

    V. A. Mechnik, N. A. Bondarenko, ... I. V. Semak in Journal of Superhard Materials

    Article 01 January 2021
    

13. Determination of the Maximum Permissible Friction Modes of Ultra-High-Molecular-Weight Polyethylene and Polymer-Composite Materials Based on It Modified on Carbon Fibers

    Abstract

    To determine the maximum permissible load-speed modes of friction of ultra-high-molecular-weight polyethylene (UHMWPE) and composites based...

    O. V. Gogoleva, P. N. Petrova, E. S. Kolesova in Polymer Science, Series D

    Article 04 September 2023
    

14. Thermal effects of rayon and polyester hijabs in warm-humid and hot-dry environments

    Hijabs are predominantly worn in hot environments, but very rare studies on the thermo-physiological effects of wearing hijabs are found. We...

    Syifa Salsabila, Maria Stenkina, ... Joo-Young Lee in Fashion and Textiles

    Article Open access 04 March 2024
    

15. Wear Behavior of Friction Stir Processed AA7075 – Aluminosilicate / MWCNT Hybrid Composite Using Multi-objective Optimization

    In this work, an armor grade AA7075-T6 matrix material plate was reinforced along the surface of the material with aluminosilicate (Al ₂ SiO ₅ ) and...

    P. S. Samuel Ratna Kumar, P. M. Mashinini, R. Vaira Vignesh in Silicon

    Article 16 May 2022

16. Aluminium Silicate Concentration and Coordination effect with Tungsten sulphide improving Dry Sliding Wear Characteristics of AA7075 alloy Composites

    In this study, highly stable aluminium silicate (Al ₂ SiO ₅ ) particles were spatially dispersed with tungsten disulphide (WS ₂ ) particles, making...

    P. Loganathan, K. Rajkumar, ... K. Vishal in Silicon

    Article 20 June 2022

17. Investigation of carbon steel particle collisions in dry and wet environments

    In particulate systems, energy dissipation in collisions is affected by the properties of the fluid and the particulate phases. When the fluid is a...

    Karla R. B. Melo, Thiago F. de Pádua, Gabriela C. Lopes in Brazilian Journal of Chemical Engineering

    Article 30 May 2023
    

18. A Comparative Study on the Anti-Friction Performance of Amorphous Silicon Films Enhanced by WS₂ Nanoflakes

    Silicon has been irreplaceable for a long time due to its well-estiblished design and fabrication in the field of Micro-Electro-Mechanical System...

    Qunfeng Zeng, Zekun Ning, ... Zeming Pang in Silicon

    Article 14 September 2022

19. Influence mechanism of dry and wet alternate aging on thermal property characteristics of wood

    Over the past years, multiple fire accidents have been witnessed in ancient wooden buildings around the world, thereby causing major losses of...

    Jiajia Song, Jun Deng, ... Chi-Min Shu in Journal of Thermal Analysis and Calorimetry

    Article 14 February 2023
    

20. High Temperature Dry Sliding Reciprocating Wear Behavior of Centrifugally Cast A356-Mg₂Si In-Situ Functionally Graded Composites

    In this study, the Al-Mg ₂ Si FG-composites were developed by in-situ centrifugal casting route with varied Mg contents (2.5, 5.0, 7.5, and...

    S. C. Ram, K. Chattopadhyay, Awani Bhushan in Silicon

    Article 03 September 2022