Search
Search Results
-
Ceramic, Glass, and Glazed Materials I
The application of electrochemical techniques to the study of ceramic, glass, and glazed materials is described. Issues in this domain include... -
Investigations of Impedance Properties of Calcium Copper Titanate (CaCu3Ti4O12) Ceramic
CaCu3Ti4O12 (CCTO) is synthesized by solid-state route at a sintering temperature of 1100 °C for 4 h. Crystal structure and microstructural analysis... -
Phase Composition of Ceramic Materials Based on Waste of the Fuel and Energy Complex
AbstractThe study concerns waste of the fuel and energy complex, ceramic samples, and the phase composition of ceramic samples. The fuel energy...
-
Investigation of Silicon Distribution in Plasma-Arc Coating on Ceramic Substrate
AbstractPlasma spraying coatings onto ceramic materials is used to solve a variety of technical problems. The plasma arc method allows for the...
-
Tribological Behavior of Chemically Bonded Ceramic Coatings Reinforced with Modified Carbon Fiber
AbstractIn this study, carbon fiber was modified by 3-Aminopropyl triethoxysilane (KH550) and employed as a functional filler to enhance the wear...
-
Diamond Grinding of Ceramic Balls in an Annular Groove
AbstractThe results of experimental study on the effect of the treatment regime on the shape accuracy of balls and the surface wear of a diamond...
-
Modification of Porous α-Al2O3 Ceramic by Boehmite Nanosheet Structures
AbstractModification of porous ceramic materials makes it possible to improve their functional characteristics. In this study, we demonstrate the...
-
Thermal Conductivity of a Hot-Pressed AlB12–AlN Ceramic Composite
AbstractThe results of studying the thermal conductivity of hot-pressed AlB 12 –AlN ceramic composites with different AlN concentrations were...
-
Preparation, Microstructure, and Properties of a Ceramic Composite Based on Stabilized Zirconium Dioxide
AbstractA pore-free ceramic composite [88ZrO 2 –11CeO 2 –Y 2 O 3 ]/La 0.85 Y 0.15 Al 11 O 18 /Al 2 O 3 , consisting of a matrix based on zirconium dioxide stabilized...
-
Dynamic Strength of a Fine-Grained Alumina Ceramic Obtained by Spark Plasma Sintering
AbstractDynamic compressive tests of alumina samples with different grain sizes obtained by spark plasma sintering (SPS) of submicron- and...
-
Physical, Thermal, and Mechanical Characterization of Ceramic (SiC) Filled Woven Glass Fiber Reinforced Hybrid Polymer Composites
The heat shielding and thermal stability capability of ceramic fillers brings it to the forefront for utilisation in polymer composites for thermally...
-
High-Temperature Bending Tests of Reaction-Sintered Silicon Carbide-Based Ceramic Materials
AbstractThe high-temperature strength properties of silicon carbide-based ceramic materials reaction-sintered in air and vacuum are proved by...
-
Nitridation of a Ti–V Metal Pair and Evaluation of the Thermoelectric Power of the Resultant Ceramic
AbstractCeramic nitride samples of tailored composition and shape have been prepared by controlled nitridation of Ti–V metal pairs. We have obtained...
-
Progress in Polymer-Ceramic Hybrid Antifouling Coatings
Simultaneous realization of superior mechanical and antifouling properties is critical for a coating. The use of stereoscopic polysiloxanes in place...
-
Diamond Grinding of Ceramic Balls with a Circular Feed
AbstractThe results of an experimental study of the effect of the processing mode on the wear of the diamond wheel surface and the accuracy of the...
-
Iron Oxides and Their Composition in Ceramic Brick Based on Power Plant Waste: Data from Mössbauer Spectroscopy
The distribution of iron oxides on firing ceramic brick produced from interstitial shale clay and iron-bearing slag from power plants, with no...
-
Spine Surgery—Part II: Ceramic and Non-ceramic Bone Substitutes: A Surgical Perspective
Bone graftsBone Grafts have been used for decades to achieve successful bone fusion in spinal surgeries. AutograftAutograft is the most effective... -
Formation of Biomimetic Apatite on Calcium Phosphate Foam Ceramic in a Concentrated Model Solution
AbstractBy firing polyurethane foam templates (STR brand, 12 pores per cm, China) with a porosity of ~65% at 1200°C, an open-pore calcium phosphate...
-
Industrial Wastes for Production of Thermally Stable and Corrosion Resistant alumino-silicate Refractory Ceramic Bodies
This study focuses on recycling of different industrial wastes as silica fume and waste clay for production of structural sintered alumino-silicate...
-
Effect of an Alkaline Etching Sludge on the Technical Parameters and Phase Composition of Composite Acid-Resistant Ceramic
The work presents studies on the synthesis of a composite acid-resistant ceramic from the raw materials of Samara oblast, namely, unenriched clay as...