Search
Search Results
-
Effect of transfer film morphology on the wear rate of SiC/PTFE composite
In our previous work, it was found that there was a good correlation between the transfer film structure and wear rate of polytetrafluorethylene...
-
The Effect of Si Addition on the Microstructure, Mechanical Properties, and Wear Rate of the Co–Cr–Mo-Based Biomedical Alloys
Biomedical alloys have gained significant attention due to their high strength, good corrosion resistance, and biocompatibility. These alloys are...
-
Wear Characteristics of Static Walls
When the solid–liquid two-phase mixture is transported, wear on flow parts occurs due to the particle impact and friction. This will reduce delivery...
-
Effect of Silicon Addition on Friction and Wear Behaviour of High Tensile Brasses
Copper alloys with the main alloying elements Zn, Al, and Ni are well known for their impact, wear, and corrosion resistance. Different fabrication...
-
Experimental Research on the Impregnated Diamond Bit Wear Model
The low rate of penetration (ROP) and severe wear of polycrystalline diamond compact (PDC) bits are one of the main problems restricting the...
-
Experimental Research on the PDC Bit Wear Model
Optimal parameter drilling has been an effective means to improve drilling efficiency for years now. It is an important theoretical basis to build...
-
Wear and Frictional Performance of Epoxy Composites Reinforced with Natural Waste Fibers and Fillers for Engineering Applications
This study focuses on develo** and examining the abrasive wear attributes of a unique epoxy composite reinforced with four fibers: rice straw (RS),...
-
Chemically Functionalized Graphene–Boron Nitride/Polypropylene Nanocomposites with Enhanced Nanomechanical and Anti-wear Properties
Polymers are soft materials with large molecular chains, which are softened during frictional wear, leading to bulk detachment of materials and poor...
-
Influence of Microstructural Characteristics on the Mechanical and Wear Behavior of Wire Arc Additive Manufactured and Cast Eutectic Al-Si Alloy
The present study investigates the dry sliding wear behavior of Wire arc additive manufactured (WAAM) eutectic Al-Si alloy, with a particular focus...
-
Research on TBM Disc Cutter Wear Prediction Based on CSM Model
The wear of disc cutters significantly impacts the efficiency and cost of TBM operations. In this study, we established a calculation model for...
-
Microstructure Study of Friction Stir Processed Hypereutectic Al-20Si Alloy and Analysis of the Wear Behaviour using Machine Learning Algorithms
Al–20Si alloy was subjected to friction stir processing to find its effect on the microstructure and wear behaviour. The microstructures of as-cast...
-
Influence of Mode Parameters of Equipment in Wear Intensity of Structural Materials
AbstractThe development of accelerated test methods can significantly reduce the time required to create reliable equipment. A laboratory setup has...
-
Wear Characteristics of the Wall Surface in Centrifugal Pump
When the centrifugal pump is transported in the solid–liquid two-phase flow, the particle movement wears the overcurrent wall surface, thereby...
-
Wear Studies on Mg-5Sn-3Zn-1Mn-xSi Alloy and Parameters Optimization Using the Integrated RSM-GRGA Method
In the present work, the wear resistance and coefficient of friction (COF) of Mg-5Sn-3Zn-1Mn-xSi (0, 1, 2 wt%) alloys were investigated. An RSM-Box...
-
Wear resistance properties of particles-reinforced epoxy nanocomposites using historical data response surface models
Knowledge of wear resistance properties of newly emerging materials as complements to their mechanical properties is important to broaden their...
-
Molybdenum disulfide@nickel phyllosilicate hybrid for improving the flame retardancy and wear resistance of epoxy composites
In this study, nickel phyllosilicate was synthesized based on molybdenum disulfide (MoS 2 @NiPS) by the sol-gel method, and then MoS 2 @NiPS was used to...
-
Deposition and Localization of Polishing Powder Wear Nanoparticles on the Processed Surface of Polymeric Optical Materials
AbstractThe investigation revealed patterns in the formation and localization of deposits of polishing powder wear nanoparticles on the processed...
-
Scattering of Polishing Powder Wear Nanoparticles on Sludge Nanoparticles during the Polishing of Polymer Optical Materials
AbstractAs a result of studying the regularities of interaction between polishing powder wear and sludge nanoparticles during the polishing of...
-
Effects of VCN coating of PEEK gears with the PVD method on wear performance
In this study, the effects of coating gear wheels made of PEEK material, which is frequently used in the industry, with the PVD method on the...
-
Material Removal Rate in Polishing Polymethylmethacrylate Parts
AbstractThe investigation into the mechanism of polymethylmethacrylate (PMMA) polishing using dispersed systems of micro- and nanoparticles of...
