Search
Search Results
-
Wear Characteristics of Static Walls
When the solid–liquid two-phase mixture is transported, wear on flow parts occurs due to the particle impact and friction. This will reduce delivery...
-
Ultra-high molecular weight polyethylene (UHMWPE)/high-density polyethylene (HDPE) blends with outstanding mechanical properties, wear resistance, and processability
Ultra-high molecular weight polyethylene (UHMWPE) has extremely outstanding mechanical properties and wear resistance, but its melt flowability is...
-
Effect of Silicon Addition on Friction and Wear Behaviour of High Tensile Brasses
Copper alloys with the main alloying elements Zn, Al, and Ni are well known for their impact, wear, and corrosion resistance. Different fabrication...
-
Wear Characteristics of the Wall Surface in Centrifugal Pump
When the centrifugal pump is transported in the solid–liquid two-phase flow, the particle movement wears the overcurrent wall surface, thereby...
-
Effects of VCN coating of PEEK gears with the PVD method on wear performance
In this study, the effects of coating gear wheels made of PEEK material, which is frequently used in the industry, with the PVD method on the...
-
Influence of Mode Parameters of Equipment in Wear Intensity of Structural Materials
AbstractThe development of accelerated test methods can significantly reduce the time required to create reliable equipment. A laboratory setup has...
-
Wear and Frictional Performance of Epoxy Composites Reinforced with Natural Waste Fibers and Fillers for Engineering Applications
This study focuses on develo** and examining the abrasive wear attributes of a unique epoxy composite reinforced with four fibers: rice straw (RS),...
-
Chemically Functionalized Graphene–Boron Nitride/Polypropylene Nanocomposites with Enhanced Nanomechanical and Anti-wear Properties
Polymers are soft materials with large molecular chains, which are softened during frictional wear, leading to bulk detachment of materials and poor...
-
Wear resistance properties of particles-reinforced epoxy nanocomposites using historical data response surface models
Knowledge of wear resistance properties of newly emerging materials as complements to their mechanical properties is important to broaden their...
-
Effect of transfer film morphology on the wear rate of SiC/PTFE composite
In our previous work, it was found that there was a good correlation between the transfer film structure and wear rate of polytetrafluorethylene...
-
Experimental Research on the PDC Bit Wear Model
Optimal parameter drilling has been an effective means to improve drilling efficiency for years now. It is an important theoretical basis to build...
-
Microstructural, Mechanical and Wear Characteristics of Industrial Waste (Brass Slag) Reinforced LM30 Alloy-Based Composite
The present work explained the effect of brass slag reinforcement on the microstructural, mechanical and wear characteristics of Al-Si alloy (LM30)...
-
Microstructure Study of Friction Stir Processed Hypereutectic Al-20Si Alloy and Analysis of the Wear Behaviour using Machine Learning Algorithms
Al–20Si alloy was subjected to friction stir processing to find its effect on the microstructure and wear behaviour. The microstructures of as-cast...
-
The Influence of Ultralow Content of Graphene on Wear-Resistant Properties of Composites Based on Ultra-High Molecular Weight Polyethylene
AbstractThe composite samples with the graphene filler content of 0.014 to 0.05 wt % have been prepared via the in situ polymerization. The effect of...
-
A nanogold sensor test for tire wear chemicals based on the plasmon ruler approach
The release of tire wear substances in the environment is raising concerns about potential impacts on aquatic ecosystems. The purpose of this study...
-
Fretting Wear Behavior of Al-Si-Mg-Ni Hypoeutectic Alloy with Varying Solutionizing Time
Aluminium and its alloys have a wide range of applications, especially in the automotive sector. Typically, aluminum alloys are utilized in pistons...
-
Effect of Adding Rice Husk Ash Functional Silicon Additives on Flammability Wear and Thermal Stability of Ramie-Epoxy Composite
The epoxy composites with ramie fiber and rice husk ash functional additives were prepared and characterized in this study. This investigation aims...
-
Solutionizing Temperature Effect on the Dry Sliding Wear Performance of Al-7Si-0.3Mg-3Ni Hypoeutectic Alloy
The solutionizing temperature effect on the dry sliding wear performance of cast T 6 heat-treated Al–Si–Mg-Ni hypoeutectic alloy is explored in this...
-
Effect of Abaca Bracts Biocarbon Volume and Infill Ratio on Mechanical, Wear, Fatigue and Hydrophobic Behaviour of Acrylonitrile Butadiene Styrene Biocomposites Tailored Using 3D Printing
The aim of this research was to create a cleaner production polymer filament using waste banana bracts biocarbon (BBB) for 3D-printing applications....
-
Electrodeposited Co-WS2 composite coatings with resistance to fouling, wear, and corrosion
Develo** a coated metal mold to avoid scuff, corrosion, and fouling in rubber vulcanization condition remains challenging. Here, a composite...
