Search
Search Results
-
Study on the influence of solvent extraction on thermal property parameters of coal oxidation
The determination of the influence law of coal molecular active structure on its oxidation and exothermic characterization parameters is one of the...
-
Thermal degradation kinetics and solvent transport behavior of natural rubber composites filled with polyurethane rich shoe sole waste from footwear industry
Industrial waste disposal is one of the major environmental concerns faced by all nations today. The present work describes the thermal degradation...
-
Polybenzimidazole: a novel, fluorocarbon-free, SPME sorbent binder with good thermal and solvent resistance properties for GC and LC analysis
A novel solid-phase microextraction (SPME) coating is presented that uses polybenzimidazole (PBI) as a binder to immobilize micro-size sorbent...
-
Mechanical, Thermal and Solvent Transport Properties of Glutaraldehyde Cured Natural Rubber/Cotton Fabric Composites
Composites of cotton fabric reinforced cured natural rubber (NR) as matrix material were prepared. Glutaraldehyde (GA) was used as a curing agent to...
-
Solvent-free automated thermal desorption-gas chromatography/mass spectrometry for direct screening of hazardous compounds in consumer textiles
The global production of textiles utilizes numerous large-volume chemicals that may remain to some extent in the finished garments. Arylamines,...
-
Exploring 129Xe NMR parameters for structural investigation of biomolecules: relativistic, solvent, and thermal effects
In recent years, the study of new probes has aroused great interest in the scientific community around the world. Therefore, in the present work, we...
-
Improved photovoltaic performance of PTB7:PC71BM blend by thermal annealing and solvent vapor annealing
The ordered aggregation of polymer donor and acceptor greatly affects the charge transport and charge recombination in polymer solar cells (PSCs)....
-
The effect of substituent position and solvent on thermal Z‒E isomerization of dihydroquinolylazotetrazole dyes: kinetic, thermodynamic, and spectral approaches
Kinetic and thermodynamic parameters have been investigated for the thermal Z‒E isomerization of dihydroquinolylazotetrazole dyes with alkyl...
-
Theoretical investigation into the solvent effect on the thermal decomposition of RDX in tetrahydrofuran, acetone, toluene, and benzene
In order to clarify the solvent effect on the thermal decomposition of explosive, the N–NO 2 trigger-bond strengths and ring strains of RDX...
-
Geometric similitude concept and Redlich–Kwong equation of state to predict thermal conductivity of choline chloride class of deep eutectic solvent
Thermal conductivity of 77 choline chloride-based deep eutectic solvents (DESs) has been estimated at 1.01325 bar and 298.15–333.15 K temperature...
-
One-step solvent thermal synthesis of 3D networked MOF composites for preparation of an ultrasensitive chemosensor for hydroquinone and catechol
Pharmaceuticals and personal care products (PPCPs) have a significant impact on the environment and human health, due to their sometimes toxic and...
-
Synergistic Effects of Solvent Vapor Assisted Spin-coating and Thermal Annealing on Enhancing the Carrier Mobility of Poly(3-hexylthiophene) Field-effect Transistors
Poly(3-hexylthiophene) (P3HT) thin films, obtained by normal spin-coating and solvent vapor assisted spin-coating (SVASP) before and after thermal...
-
Improved electrochemical performances of LiOVPO4/ketjen black composite prepared by a novel solvent-thermal oxidation route
Orthorhombic β-LiVOPO 4 /ketjen black composite is obtained via a two-step chemical synthesis. In the first step, Li 3 V 2 (PO 4 ) 3 -V 2 O 3 /ketjen black...
-
The effect of thermal setting, solvent type, and concentration on the tensile behavior of electrospun PLGA and polyamide nanofiber yarns simulated with the modified viscoelastic model
In this paper, the stress–strain behavior of polyamide (PA) and poly(lactic- co -glycolic acid) (PLGA) nanofiber yarns was modeled by the modified...
-
Effect of N,N′-dimethylformamide solvent on structure and thermal properties of lanthanide(III) complexes with flexible biphenyl-4,4′-dioxydiacetic acid
The N,N′-dimethylformamide (DMF) was used in the microwave-assisted (MW) solvothermal method for the preparation of lanthanide(III) complexes with...
-
Solvent-free synthesis of PEG modified polyurethane solid-solid phase change materials with different Mw for thermal energy storage
The different molecular weights of polyurethane (PU), using as solid-solid phase change materials, were synthesized by different molar ratios of...
-
Mechanochemical and thermal succinylation of softwood sawdust in presence of deep eutectic solvent to produce lignin-containing wood nanofibers
In this study, the effect of the deep eutectic solvent (DES) based on triethylmethylammonium chloride and imidazole on the mechanochemical...
-
The solvent effect in obtaining of acid–base multicomponent systems: thermal, structural and luminescence study
Acid–base multicomponent systems based on active pharmaceutical ingredients 2-chloro-5-nitrobenzoic acid (2Cl5NBH) and monoethanolamine were prepared...
-
Influence of the solvent removal method on the morphology of polystyrene porous structures prepared via thermally induced phase separation
Thermally induced phase separation (TIPS) allows preparation of nano and micro-porous structured materials for various applications. The literature...
-
Effect of casting solvent on the structure development, electrical, thermal behavior of polyvinylidene fluoride (PVDF)–carbon nanofiber (CNF) conducting binary and hybrid nanocomposites
The role of two solvents, namely N , N -dimethylformamide (DMF) and N , N -dimethylacetamide (DMAc), on the dispersion of CNF in PVDF matrix has been...
