Search
Search Results
-
A Low-Temperature SiO2 Interfacial Layer Preparation using Rapid Thermal Oxidation Process for GAA Nanosheet Based I/O Transistor
In this paper, a low-temperature SiO 2 interfacial layer preparation using rapid thermal oxidation (RTO) process for gate-all-around (GAA) nanosheet...
-
Interfacial Properties of Aramid Fiber Composites Reinforced with SiO2-Coated ZnO Nanoparticles
In this study, silica-coated zinc oxide nanoparticles (NPs) were prepared via a sol-gel method using inorganic NPs with an organic polymer binding. A...
-
Effect of 1wt% GO, MWCNTs, SiO2-GO and SiO2-MWCNTs on Mechanical Properties and Corrosion Resistance of Double-Layer Zinc Silicate Coatings
A double-layer structure coating combining the advantages of GO shielding and the conductivity of MWCNTs was proposed. The sol–gel method was used to...
-
Physicochemical Characterization of Interfacial Defect Reduction in Superficially Modified Hydrophobic SiO2-Aerogel Composites
The aim of this research is to reduce the number of defects caused by the hydrophobicity of silica aerogel (SA) in the interfacial transition zone...
-
Modification of an Interfacial Layer of Reinforced Polymer Composites with Nanodispersed Silicon Dioxide
AbstractThe behavior of colloidal silicon dioxide in a composition with a styrene/butyl acrylate oligomer grafted onto a thermoplastic polyamide...
-
Investigation on Wettability Behaviour of Electrode Coatings using Silica-based SiO2-CaO-CaF2 and ZrO2-CaO-SiO2 Flux System
This paper aims to investigate the high-temperature wettability properties of laboratory-developed electrode coatings for offshore applications. The...
-
Tensile and Dry Sliding Wear Properties of Compo-Cast SiO2 Coated ABOw/ Al-319 Composites
Al-319 matrix composite reinforced by SiO 2 -coated Al 18 B 4 O 33 (ABO w ) whiskers with different percentages (2.5,5,7.5,10%) were fabricated by a...
-
Surface modification of a polypropylene separator by an electrospun coating layer of Poly(vinyl alchohol)-SiO2 for lithium-ion batteries
Nowadays lithium-ion batteries are widely used in many electrical equipments. Separators are a key component in lithium-ion batteries (LIBs) and...
-
Carbon-coated disproportionated SiO composite as anode materials for lithium-ion batteries
SiO is one of the most attractive anode materials for lithium-ion batteries due to its abundance and high theoretical specific energy density....
-
Novel PEG/SiO2/SiO2–modified expanded graphite composite phase change materials for enhanced thermal energy storage performance
A binary porous material of SiO 2 and SiO 2 –modified expanded graphite (MEGR) was simultaneously prepared based on a low-cost and template-free...
-
Development of a Dynamic Model of Collision and Coalescence for Molten Matte Droplets in Copper Smelting Reaction Shaft Considering Interfacial Deformation
In the flash furnaceFlash furnace for copper smeltingCopper smelting, Cu loss in the slag is an economically important topic. It is known that the...
-
Cycling performance of SiOx-Si-C composite anode with different blend ratios of PAA-CMC as binder for lithium sulfur batteries
Silicon (Si) -based materials have been identified as a potential alternative anode owing to their superior theoretical capacity compared to...
-
Stability mechanism of SiO2/SDS dispersion for foam flooding in hydrocarbon reservoirs: experimental research and molecular simulation
The dispersion of silica dioxide (SiO 2 )/sodium lauryl sulfate (SDS) has been widely used in hydrocarbon reservoirs, but its instability is still a...
-
Improvement of characterization and application of Polyethersulfone membrane by CeO2@SiO2 nanoparticles for drug pollutant removal
In this study, thin film composite membranes were fabricated and modified by CeO 2 functionalized SiO 2 (CeO 2 @SiO 2 ) through an interfacial...
-
Basics of Interfacial Electrokinetics
All electrokinetic microfluidic and nanofluidic phenomena and processes are results of the interaction of the applied electrical field with the...
-
The interfacial interactions of nanomaterials with human serum albumin
The fates of nanomaterials (NMs) in vivo are greatly dependent on their interactions with human serum proteins. However, the interfacial molecular...
-
Tissue paper-based composite separator using nano-SiO2 hybrid crosslinked polymer electrolyte as coating layer for lithium ion battery with superior security and cycle stability
In order to develop high power lithium ion batteries (LIBs), urgent requirements including adequate safety, higher current density and superior...
-
Using Nano-powders to Improve the Interfacial Bonding Strength of Carbon Fiber/Epoxy Composites
The interfacial bonding strength is undoubtedly very crucial to the mechanical performance of carbon fiber/epoxy composites. In this work, their...
-
Effect of SiO2-MWCNTs on Mechanical and Tribological Properties of Acrylic Silicone Resin Coating
The characteristics of multi-impurities and high-flow velocity in the marine environment can easily cause wear and tear of the surface coating of...
-
Improvement of Phase Transformation and Densification of SiO2-ZrO2 Ceramics by Using Desert Sand as a SiO2 Source
Desert sand was introduced to improve the transformation of zircon (ZrSiO 4 ) and densification of SiO 2 -ZrO 2 ceramics. The effect of desert-sand...