Search
Search Results
-
Formation of Hydrophobic and Superhydrophobic Coatings on Track-Etched Membrane Surfaces to Create Composite Membranes for Water Desalination
AbstractDifferent methods have been considered for the formation of coatings on the surface of a hydrophilic poly(ethylene terephthalate)...
-
Hydrophilic Modified Siloxane Coatings
AbstractCoatings on glass and poly(ethylene terephthalate) have been obtained on the basis of oligosiloxanes bearing chloromethyl and aminopropyl...
-
On the Fabrication of Hydrophobic Coatings by Polycondensation of Fluoroalkylalkoxysilanes
AbstractIt has been shown that for obtaining hydrophobic coatings, it is reasonable to use fluoroalkylalkoxysilanes (FASs) with a longer fluoroalkyl...
-
On the Issue of the Stability of Water-Repellent Infusion Liquids on Hydrophilic and Hydrophobic Silica Substrates
AbstractThe macroscopic theory of the van der Waals forces has been used to calculate disjoining pressure isotherms for silicone oil and...
-
A Hydrophilic/Hydrophobic Janus Membrane Used as Wound Dressings with Enhanced Antibacterial Properties
In this study, an asymmetric wettable composite wound dressing consists of hydrophobic polyvinylidene fluoride (PVDF) outer layer and a hydrophilic...
-
Highly Hydrophobic Polyurethane Coatings Modified with an Organosilicon Block Copolymer and Amino-Functionalized Nano/Microdispersed SiO2–NH2
AbstractThe joint effect exerted on the hydrophobic properties of two-component polyurethane coatings by SiO 2 –NH 2 particles prepared from...
-
Constructing stable transparent hydrophobic POSS@epoxy-group coatings for waterproofing protection of decorative-painting surfaces
Fabrication of waterproof decorative paintings has attracted a great deal of interest. In this work, in situ reaction using poly(glycidyl...
-
Surface zeta potential and protein adsorption on the coating surface of a heteroarm star polymer with a controlled hydrophilic/hydrophobic arm ratio
A surface coated with a star polymer is believed to form a highly dense polymer brush-like architecture and inhibit biofouling. In this study, the...
-
One-pot fabrication of bio-based hydrophobic and flame-retardant coating for cotton fabric
The facile fabrication of eco-friendly flame-retardant coatings with high efficiency, hydrophilicity, and good softness for cotton fabrics is...
-
Development of the hydrophilic additive by suspension copolymerisation of methacrylic acid with isodecyl methacrylate for easy-to-clean coatings
Achieving easy cleanability by using hydrophilic additive is an imminent perspective. In this study, easy cleanability to coating was induced by the...
-
Deposition of Hydrophobic Polymer Coatings on the Surface of Track-Etched Membranes from an Active Gas Phase
AbstractThe surface properties and chemical structure of nanosized coatings deposited on the surface of poly(ethylene terephthalate) track-etched...
-
Adsorption of Polyelectrolytes with Hydrophobic Parts
Polyelectrolytes offer numerous possibilities for modification of particles, planar inorganic or polymer surfaces, and control of colloidal... -
Stability of Some Silicone Lubricating Interlayers in Liquid-Infused Coatings
AbstractOne of the most actively develo** research areas in materials science relevant to polyfunctional coatings is the creation of slippery...
-
Water-Soluble Interpolyelectrolyte Complex Based on Poly(diallyldimethylammonium chloride) and Sodium Polyacrylate as a Component for Creating Stable Biocidal Coatings
AbstractPolycation-based coatings represent a promising class of protective antimicrobial coatings. Water-soluble complexes of...
-
Hydrophobic Al2O3/SiO2/PDMS Composite Coatings for Anti-corrosion Application of 304 Stainless-Steel
Polymer coatings for steel anticorrosion are usually susceptible to damage by invading water, oxygen and chloride ions, therefore, it is still a...
-
Photocuring behavior of low molecular weight biomass-derived methacrylate monomers for paper coatings
The quest for sustainable materials in industrial applications has led to the exploration of biobased monomers for photocurable resins. This study...
-
Fruit Peel–Based Edible Coatings/Films
Convenience and lifestyle changes have spurred food-processing industries to produce consumable products such as fruit juices, jams, jellies,... -
Plasma Techniques for the Fabrication of Hydrophobic Substrates
Recent advances in the texturing process generate definite possibilities for the fabrication of hydrophobic metallic substrates using plasma etching... -
Influence of Composition of Copolymers of Glycidyl Methacrylate and Alkyl Methacrylates on the Free Energy and Lyophilic Properties of the Coatings
AbstractThe use of reactive copolymers of glycidyl methacrylate and alkyl methacrylates differing in the length of the alkyl substituent (С6–С18) has...
-
Sustainable fabrication of hydrophobic lignocellulose micro and nanofibrils mulch films and spray coatings
The increased level of plasticulture recently practiced has increased the volume of waste plastics in the soil and consequently decreased...