Search
Search Results
-
Influence of material properties of electrodeposited copper by different modes of electrodeposition on pool boiling heat transfer
The influence of surface adhesion between the electrodeposited coating and the base material prepared by different modes of electrodeposition on pool...
-
Electrodeposition of tin, selenium, and tin-selenium compound in the choline chloride-glycerol deep eutectic solvent
The electrochemistry of Sn(II), Sn(IV), and Se(IV) in the choline chloride-glycerol deep eutectic solvent was investigated on glassy carbon at 110 °C...
-
On the Mechanism of Formation of Electrochromic WO3 Films on the Surface of Sn, Ti, ITO Electrodes in the Process of Cathodic Electrodeposition
Abstract —The mechanism of the electrochemical formation of WO 3 films on the surface of titanium, tin, and ITO electrodes is investigated under...
-
Model Describing of the Loose Zinc Electrodeposition Process in the Pulse-Potential Modes
AbstractThe structural characteristics of loose zinc deposits obtained in pulse-potential modes are calculated using a phenomenological model....
-
Modification of Waterborne Primer VKF-093 for Electrodeposition
AbstractA method was proposed for introducing cobalt resinate catalyst into VKF-093 primer-based waterborne compositions for electrodeposition. The...
-
Evaluation of sulfate-oxalate deposition solution with new electrodeposition system
The presented paper defined parameters of electrodeposition and their relationships for selected alpha-emitting radionuclides to be used as an...
-
Localized or Spatially Selective Electrodeposition Methods
This chapter summarizes methods of great variety in which the localization of the electrodeposition is a result of the presence of a thin reaction... -
A Model Describing the Process of the Electrodeposition of Zinc Loose Deposits in Pulsed Current Modes
AbstractA phenomenological model describing the change in the structural characteristics of loose zinc deposits obtained in pulsed current modes is...
-
Electrochemistry and Electrodeposition
The present chapter offers a general overview on the basis of electrochemistry. This introduction deals also with concepts that are seldom discussed... -
Correlation between morphology and hardness of electrolytically produced copper thin films
Correlation between morphology of electrolytically produced copper thin films and their hardness has been considered. The Cu films were...
-
Selection of appropriate electrochemical deposition regime for cerium conversion coating on anodized AA2024-T3 aircraft alloy
The reliable and durable corrosion protection of commercially attractive aluminum alloys like AA2024-T3 is the subject of world-wide intensive...
-
Analyzing the Conditions for the Electrolytic Formation of Ensembles from Metal Nanowires in the Pores of Track Membranes
AbstractThe effect of the electrolyte composition, mass-transfer conditions, pore diameter, interpore distance, and electric parameters on the...
-
Development of electrochemistry in Serbia-challenges and perspectives
In this review, the development of electrochemistry in Serbia is presented, with an accent on historical moments from the beginning up to...
-
A Study of the WO3/GO Electrochromic Films Obtained by the Electrochemical Deposition Route: Optical and Electromagnetic Method
AbstractThe optical and electromagnetic properties of graphene oxide (GO)-modified WO 3 electrochromic nanocomposite films obtained by...
-
Electrochemical nucleation and the role of the surface state: unraveling activity distributions with a cross-system examination and a local electrochemistry approach
Electrochemical nucleation and growth (EN&G) is an inherently dynamic process governed by atomic-level interactions. Understanding the...
-
Optimization of process of the honeycomb-like structure formation by the regime of reversing current (RC) in the second range
Formation of the honeycomb-like electrodes of copper by the regime of reversing current (RC) in the second range has been investigated. Morphological...
-
The control of morphology and structure of galvanostatically produced tin dendrites by analysis of chronopotentiometry response
The influence of chronopotentiometry response on the morphology and structure of galvanostatically synthesized tin dendritic particles has been...
-
A Review of Solid Electrolyte Interphase (SEI) and Dendrite Formation in Lithium Batteries
Lithium-metal batteries with high energy/power densities have significant applications in electronics, electric vehicles, and stationary power...
-
The Effect of Decalin and Perfluorodecalin on Dendrite Formation at Metallic Lithium Anodes during Their Operation
AbstractIn this work, we studied the effect of additions of decahydronaphthalene (decalin) and its derivative, perfluorodecalin...
-
Composite Pt/(SnO2/C) and PtSnNi/C Catalysts for Oxygen Reduction and Alcohol Electrooxidation Reactions
AbstractThe electrodeposition of tin and tin-nickel on a highly dispersed carbon material is used to obtain composite supports. These composite...