Search
Search Results
-
Optimal current density for cathodic CeCC deposition on anodized AA2024-T3 aircraft alloy
The reliable and durable corrosion protection of structural materials, such as the AA2024-T3 aircraft alloy, is the subject of intensive research...
-
Selection of appropriate electrochemical deposition regime for cerium conversion coating on anodized AA2024-T3 aircraft alloy
The reliable and durable corrosion protection of commercially attractive aluminum alloys like AA2024-T3 is the subject of world-wide intensive...
-
Corrosion inhibition of magnesium alloy AZ31 in chloride-containing solutions by aqueous permanganate
In this work, corrosion of the AZ31 magnesium alloy was examined in 0.05 M NaCl solutions containing 0.01–0.150 mol/dm 3 of potassium permanganate as...
-
Corrosion in the Development and Airworthiness Certification of Select Al and Mg Aerograde Alloys
Materials design and selection in aerospace industries are dictated mainly by the density, specific strength/stiffness in static and dynamic... -
Localization-Delocalization Matrices Analysis for Corrosion Inhibition
In this chapter, three case studies will be presented illustrating how to use electron localization-delocalization matrices (LDMs) analysis in the... -
Characterization and Optimization of Flat Friction Stir Spot Welding of Triple Sheet Dissimilar Aluminium Alloy Joints
The method of flat friction stir spot welding (FFSSW) was used to investigate the tensile behavior of three thin dissimilar aluminium alloys (Two...
-
Electrochemical characterization of Al–Li alloys AA2099 and AA2055 for aeronautical applications: effect of thermomechanical treatments
Third-generation Al–Li alloys are high-performance materials that are very attractive for aircraft and aerospace applications due to their relatively...
-
Performance Analysis of Nano Silicon Carbide Reinforced Swept Friction Stir Spot Weld Joint in AA6061-T6 Alloy
Swept friction stir spot welding (SFSSW) is one of the preferred welding methods used in joining metals. The application of this joining process is...
-
Influence of Reinforcement with Multi-Pass FSW on the Mechanical and Microstructural Behavior of Dissimilar Weld Joint of AA5083 and AA6061
In the present study, a defect-free dissimilar weld joint of AA5083 and AA6061 was fabricated, and the influence of SiC particles with multi-pass...
-
New Insights in Adhesive Properties of Hybrid Epoxy-Silane Coatings for Aluminum Substrates: Effect of Composition and Preparation Methods
The sol–gel system has attractive properties both in terms of adhesion to metal substrates and of its great potential to replace the toxic treatments...
-
-
Synergistic effect between glutamic acid and rare earth cerium (III) as corrosion inhibitors on AA5052 aluminum alloy in neutral chloride medium
The synergistic effect of glutamic acid (Glu) and rare earth cerium (III) ion on corrosion inhibition for AA5052 aluminum alloy in 3 wt% NaCl was...
-
Towards Cr(VI)-free anodization of aluminum alloys for aerospace adhesive bonding applications: A review
For more than six decades, chromic acid anodizing (CAA) has been the central process in the surface pre-treatment of aluminum for adhesively bonded...
-
Laboratory Investigation into Anti-contamination Coatings for Mitigating Insect Contamination with Application to Laminar Flow Technologies
Insect contamination on aircraft leading edge surfaces can result in premature transition of the boundary layer, leading to an increase in skin... -
On the corrosion behavior of Al2Cu by local electrochemical impedance spectroscopy using droplet cell microscopy
In this short communication, we study the electrochemical behavior of an individual Al 2 Cu intermetallic phase (coexisting with α-Al) in 0.1 M NaCl...
-
Contact Glow Discharge Electrolysis: A Novel Tool for Manifold Applications
Contact glow discharge electrolysis (CGDE)/plasma electrolysis (PE) which is associated with the formation of a light emitting plasma around an...
-
Influence of organic corrosion inhibitors on the corrosion performance of organic–inorganic hybrid coatings applied on aluminium alloy
The proposed work aims to develop and study sol–gel derived anticorrosion films for aluminium. To further improve performance of these films,...
-
Synthesis and Structure of Environmentally Friendly Hybrid Clay/Organosilane Nanocomposite Coatings
Environmentally friendly polysiloxane and clay/polysiloxane composite coatings were synthesized on aerospace-grade aluminum alloy AA2024-T3...