Search

Search Results

1. Facile synthesis of polyaniline nanorods to simultaneously enhance the mechanical properties and wear resistance of epoxy composites

   To enhance the mechanical properties and wear resistance of epoxy resin, polyaniline nanorods were first synthesized using a facile route, and then...

   Liu Jiang, **ian Yang, ... Xuesong Feng in Frontiers of Chemical Science and Engineering

   Article 03 May 2023
   

2. Solutionizing Temperature Effect on the Dry Sliding Wear Performance of Al-7Si-0.3Mg-3Ni Hypoeutectic Alloy

   The solutionizing temperature effect on the dry sliding wear performance of cast T ₆ heat-treated Al–Si–Mg-Ni hypoeutectic alloy is explored in this...

   Vasudev Raveendranath, Aravind Senan V. R, ... Karthik V. Shankar in Silicon

   Article 18 February 2023

3. Wear and Corrosion Properties for the Effect of Addition Cu to Ti–18Nb Biomaterial

   The current work related to investigate wear and corrosion properties for addition three weight% of copper to Ti–18Nb alloy using powder metallurgy...

   Hüseyin Demirtaş, Mohammed Riyadh, Rana Anaee in Chemistry Africa

   Article 19 May 2023
   

4. Erosion wear assessment of sugarcane fibre reinforced polymer composites for applications of wind turbine blades

   This research reports erosion wear characteristics of polyester matrix composite reinforced with short fibres of sugar cane. Erosion tests were...

   N.S.M. El-Tayeb, Tamer A. Mohamed, ... Mahmoud Elthakaby in Journal of Polymer Research

   Article Open access 01 September 2023
   

5. Effect of Adding Rice Husk Ash Functional Silicon Additives on Flammability Wear and Thermal Stability of Ramie-Epoxy Composite

   The epoxy composites with ramie fiber and rice husk ash functional additives were prepared and characterized in this study. This investigation aims...

   Anil Kumar, Anantha Raman Lakshmipathi, ... Neti Praveen in Silicon

   Article 18 April 2023

6. Effect of Al₃Ni and SiC on Mechanical and Wear Behaviour of Al-Ni-SiC Composite

   The present article discusses the combined effect of SiC reinforcement particle and in-situ formed Al ₃ Ni on the mechanical and wear behavior of...

   Manik Mahali, Nitesh Kumar Sinha, ... S. Mohan in Silicon

   Article 27 January 2023

7. Synergistic effects of aramid fibre and resorcinol-formaldehyde-latex-coated aramid fibre on improving the wear resistance of nitrile rubber composites

   To improve the wear performance of aramid fibre (AF)/nitrile rubber (NBR) composites, in this study, untreated AFs and...

   Sheng Wan, Zhuo Li, ... Ruijun Sun in Iranian Polymer Journal

   Article 05 February 2023
   

8. Microstructural, Mechanical and Wear Characteristics of Industrial Waste (Brass Slag) Reinforced LM30 Alloy-Based Composite

   The present work explained the effect of brass slag reinforcement on the microstructural, mechanical and wear characteristics of Al-Si alloy (LM30)...

   Mahesh Sharma, Varun Singhal, ... V. K. Dwivedi in Silicon

   Article 14 September 2023

9. Fretting Wear Behavior of Al-Si-Mg-Ni Hypoeutectic Alloy with Varying Solutionizing Time

   Aluminium and its alloys have a wide range of applications, especially in the automotive sector. Typically, aluminum alloys are utilized in pistons...

   V. Govind, Kumar K. Praveen, ... Karthik V. Shankar in Silicon

   Article 22 February 2023

10. A Regression Model for Tool Wear and Breakage Diagnosis

    Many studies have addressed tool wear diagnosis, breakage detection, and tool vibration removal in machining large workpieces, such as moulds and...

    S. G. Kim, E. Y. Heo, ... D. W. Kim in Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus

    Conference paper 2023
    

11. Sustainable, recyclable, and highly wear-resistant wood matrix as a new paper-based friction material

    Shifting of the preparation strategy of paper-based friction materials from unsustainable to green, environmentally friendly, and recyclable...

    Zhiqiang Shan, **aohua Jia, ... Haojie Song in Cellulose

    Article 09 June 2023
    

12. Investigation of the Influence of Ni and Cu Additions on the Wear Behavior of Spray Formed Al-15Si Alloy at Elevated Temperature

    The aim of this study is to develop a novel class of alloy material using spray forming process, which is a rapid solidification process that...

    Mehabubsubahani R. Alavandi, Julfikar Haider, Dayanand M. Goudar in Silicon

    Article 02 May 2023

13. Electrodeposited Co-WS₂ composite coatings with resistance to fouling, wear, and corrosion

    Develo** a coated metal mold to avoid scuff, corrosion, and fouling in rubber vulcanization condition remains challenging. Here, a composite...

    Cansen Liu, **anhong Wu, ... Huisi **e in Journal of Solid State Electrochemistry

    Article 18 August 2023
    

14. The Influence of Composition and Size of Gravel Filler Composite with Epoxy Basis on Its Abrasive Wear

    Abstract

    The performed experiments showed that the maximum abrasive-wear resistance is achieved with the composition of a composite of 60 pts wt of...

    A. M. Mikhalchenkov, S. A. Feskov, ... A. S. Kononenko in Polymer Science, Series D

    Article 04 September 2023
    

15. The Influence of Ultralow Content of Graphene on Wear-Resistant Properties of Composites Based on Ultra-High Molecular Weight Polyethylene

    Abstract

    The composite samples with the graphene filler content of 0.014 to 0.05 wt % have been prepared via the in situ polymerization. The effect of...

    A. S. Zabolotnov, S. S. Gostev, ... R. I. Chelmodeev in Polymer Science, Series A

    Article 01 June 2023
    

16. Interaction of Sludge Particles and Wear Particles of Polishing Powder in the Process of Polishing of Polymeric Optical Materials

    Abstract

    As a result of studying the laws of interaction of sludge particles and polishing powder wear particles during polishing of polystyrene,...

    Yu. D. Filatov, V. I. Sidorko, ... O. Ya. Yurchishyn in Journal of Superhard Materials

    Article 01 June 2023
    

17. Wear test and thermal stability analysis of commercial oil with three types of alkyl mercaptans

    The performance of dodecyl mercaptan (C ₁₂ H ₂₆ S), hexadecyl mercaptan (C ₁₆ H ₃₄ S), and octadecanethiol (C ₁₈ H ₃₈ S) as novel oil additives was assessed. The...

    Jhih-Ying Chen, Sheng-Wei Liao, ... Chi-Min Shu in Journal of Thermal Analysis and Calorimetry

    Article 03 April 2023
    

18. Effect of SiC Particle Size on the Mechanical and Wear Behavior of Al356 Metal Matrix Composites

    This study investigates the mechanical properties and wear behavior of SiC reinforced Al356 metal matrix (AlSiMg) composite materials produced by the...

    Halil Karakoç in Silicon

    Article 19 September 2023

19. Influence of Silicon Carbide Reinforcements on Mechanical and Wear Behaviour AA7075/15% wt. Glass fiber Hybrid Composites

    Aluminium hybrid composites are a new generation of metal matrix composites that have the potential of satisfying the recent demands of advanced...

    G. Saravanan, G. B. Bhaskar in Silicon

    Article 21 September 2022

20. Movement, Wear Comfort, and Compression Evaluation of Nylon and Polyurethane Blend Stretch Knit Material and 3D Virtual Fitting Stress Strain Comparison

    This study analyzed leggings patterns and materials and evaluated user satisfaction with movement, wear comfort, and compression by body part and...

    Jong Kyu Lee, Ho Sun Lim in Fibers and Polymers

    Article 27 June 2023