-
Article
Characterization of Microstructure and Texture in Grain-Oriented High Silicon Steel by Strip Casting
Grain-oriented 4.5 wt% Si and 6.5 wt% Si steels were produced by strip casting, warm rolling, cold rolling, primary annealing, and secondary annealing. Goss grains were sufficiently developed and covered the e...
-
Article
Microstructure and mechanical properties of a novel hot-rolled 4% Mn steel processed by intercritical annealing
The study described here focuses on the microstructure and mechanical properties of a novel hot-rolled medium-Mn steel (Fe–0.25C–4Mn–1.88Al–0.6Si–0.04Nb–0.08V, wt%) that contained only 4 wt% Mn and modest Al c...
-
Article
Influence of heat treatment on microstructure and nanohardness of TiAl alloy solidified under high pressure
The Ti-48at.%Al alloy solidified under different pressures was prepared using a tungsten-carbide six-anvil apparatus and then heat treated at different temperatures. The effect of heat treatment on microstruct...
-
Article
Dynamic Recovery and Recrystallization Behaviors of C71500 Copper-Nickel Alloy Under Hot Deformation
The isothermal compression test was employed to study the influence of deformation temperature and strain rate on the hot deformation behavior of C71500 copper-nickel alloy. According to the characteristics of...
-
Article
Analysis of the Influence of Sulfur on the Hot Tensile Fracture of C71500 Cu-Ni Alloy
The hot tensile test was applied to study the influence of sulfur content on the high-temperature mechanical properties of C71500 Cu-Ni alloy. The hot processing map of C71500 alloy was established according t...
-
Article
Texture and Special Grain Boundary Distribution of C71500 Copper-Nickel Alloy Tubes at Different Annealing Temperatures
Two-stage rolling process was adopted to study the texture and special grain boundary distribution of C71500 copper-nickel alloy tubes at different annealing temperatures. The effect of temperature on the text...
-
Article
Effect of Sulfur on Hot Compression Properties of C71500 Cupronickel Alloy
The influence of sulfur on the hot compression properties of C71500 cupronickel alloy and the mechanism of thermo mechanical effect are studied for the first time. The composition of sulfide inclusions and its...
-
Article
Effect of Thickness Reduction on Microstructure and Properties of Rolled C71500 Cupronickel Alloy Tube
The electron backscatter electron diffraction (EBSD) technique was applied to study the microstructure evolution and properties of the annealed cold rolling C71500 cupronickel alloy tube. The fixed reduction r...
-
Article
Effect of Annealing Treatment on Precipitates and Tensile Properties of FeCoCrNiVN High-Entropy Alloy Produced by Twin-Roll Casting
In the present work, an as-cast strip of novel high entropy alloy (Fe48.8Co26.9Cr9.7Ni5.7V8.3N0.6 at.%) was successfully produced by twin-roll casting technology. Then, the as-cast strip with or without primary a...
-
Article
Helicid Alleviates Neuronal Apoptosis of Rats with Depression-Like Behaviors by Downregulating lncRNA-NONRATT030918.2
Helicid (HEL) has been found to possess antidepressant pharmacological activity. The paper was to testify to the precise molecular mechanism through which HEL regulates lncRNA-NONRATT030918.2 to exert an antid...
-
Article
A novel Al-alloyed press-hardening steel with superior mechanical and antioxidant properties
A novel Al-alloyed press-hardening steel (PHS) was developed, which exhibits excellent tensile, bending and antioxidation properties. Al is a ferrite-forming element that can hinder the formation of cementite ...
