Skip to main content

6 Result(s)

within Yuan-xiang Zhang Remove this filter Engineering Design Remove this filter

and

  1. No Access

    Article

    Effect of Annealing Treatment on Precipitates and Tensile Properties of FeCoCrNiVN High-Entropy Alloy Produced by Twin-Roll Casting

    In the present work, an as-cast strip of novel high entropy alloy (Fe48.8Co26.9Cr9.7Ni5.7V8.3N0.6 at.%) was successfully produced by twin-roll casting technology. Then, the as-cast strip with or without primary a...

    Rong Ran, Yuan-xiang Zhang, Yang Wang… in Journal of Materials Engineering and Perfo… (2024)

  2. No Access

    Article

    Effect of Thickness Reduction on Microstructure and Properties of Rolled C71500 Cupronickel Alloy Tube

    The electron backscatter electron diffraction (EBSD) technique was applied to study the microstructure evolution and properties of the annealed cold rolling C71500 cupronickel alloy tube. The fixed reduction r...

    **n Gao, Hui-bin Wu, Ming Liu… in Journal of Materials Engineering and Perfo… (2021)

  3. No Access

    Article

    Texture and Special Grain Boundary Distribution of C71500 Copper-Nickel Alloy Tubes at Different Annealing Temperatures

    Two-stage rolling process was adopted to study the texture and special grain boundary distribution of C71500 copper-nickel alloy tubes at different annealing temperatures. The effect of temperature on the text...

    **n Gao, Hui-bin Wu, Ming Liu… in Journal of Materials Engineering and Perfo… (2021)

  4. No Access

    Article

    Effect of Sulfur on Hot Compression Properties of C71500 Cupronickel Alloy

    The influence of sulfur on the hot compression properties of C71500 cupronickel alloy and the mechanism of thermo mechanical effect are studied for the first time. The composition of sulfide inclusions and its...

    **n Gao, Hui-bin Wu, Feng Gao, Ming Liu… in Journal of Materials Engineering and Perfo… (2021)

  5. No Access

    Article

    Analysis of the Influence of Sulfur on the Hot Tensile Fracture of C71500 Cu-Ni Alloy

    The hot tensile test was applied to study the influence of sulfur content on the high-temperature mechanical properties of C71500 Cu-Ni alloy. The hot processing map of C71500 alloy was established according t...

    **n Gao, Huibin Wu, Ming Liu, **angdong Zhou… in Journal of Materials Engineering and Perfo… (2021)

  6. No Access

    Article

    Dynamic Recovery and Recrystallization Behaviors of C71500 Copper-Nickel Alloy Under Hot Deformation

    The isothermal compression test was employed to study the influence of deformation temperature and strain rate on the hot deformation behavior of C71500 copper-nickel alloy. According to the characteristics of...

    **n Gao, Hui-bin Wu, Ming Liu… in Journal of Materials Engineering and Perfo… (2020)