3,530 Result(s)
within
Wu**an Li
Characterization and Evaluation of Materials
Nanotechnology
Surfaces and Interfaces, Thin Films
-
Article
Effect of Annealing Stress on the Magnetic Properties of High-Grade Non-oriented Electrical Steel
Effect of annealing stresses on the magnetic properties of non-oriented electrical steel has been studied. When the annealing stress increases from 2.5 to 4.5 MPa, the iron loss P1.0/400 of non-oriented electrica...
-
Article
Effect of Mn Contents on Microstructure Evolution and Recrystallization Behavior of 18.5 Pct Cr Low-Nickel Type Duplex Stainless Steel During Multi-pass Hot Compression
This study examined the effect of manganese (Mn) contents (3.12 to 8.97 pct) and three-pass deformation distributions on dynamic recrystallization (DRX) and dislocation evolution during hot compression of low-...
-
Article
Enhancing the Thermal Conductivity of Laser Powder Bed Fusion AlSi20 by Introducing a Novel TiC–Ti Coated Diamond Powder
The formation of pores induced by the poor wettability of diamond with the AlSi20 matrix for the powder bed fusion using a laser beam (PBF-LB) process largely deteriorates the thermal conductivity. This study ...
-
Article
The Laminated/Network Interface Design and Deformation Behavior of Multilayer Steel
The SUS304/45 multilayer steels with laminated/network coupling interfaces were fabricated by cold rolling, and the interface evolution behavior and strengthening–toughening mechanism were clarified by microst...
-
Article
Microstructure of Batch Hot-Dip Zn-5 Wt Pct Al Coatings: Comparison of Ball-Milling Pretreatment and Conventional Pretreatment
Instead of pickling and solvent fluxing in the conventional batch hot-dip galvanizing, ball-milling pretreatment was used to study the crystal orientation of the Q235 steel surface and the structure growth of ...
-
Article
Solubility Product of Aluminum Nitride in Steels: Thermodynamic Calculations
Thermodynamic models were employed to determine the solubility product of aluminum nitride in steels containing the solid solution elements of Mn, Ni, Cr, and Mo. Specific solubility product expressions were d...
-
Article
Current Progress in Aqueous Corrosion of Multi-Principal Element Alloys
While multi-principal element alloys (MPEAs) remain a promising class of materials owing to several attractive mechanical properties, their corrosion performance is also unique. In this concise review, we pres...
-
Article
Refinement Mechanism of the Hypoeutectic Al–7Si Alloy by Adding a Novel La-Rich Rare-Earth Grain Refiner
Refining the grain size of the as-casted hypoeutectic Al–Si alloys is an established technique for improving their mechanical properties. This work is based on the development of a novel La-riched grain refiner,
-
Article
Correction: The influence of boron microalloying on the microstructural and mechanical properties of Ni-Mn-Sn-Gd shape memory alloy
-
Article
First principles study on the mechanical properties and generalized stacking fault energy of CsCl, CsBr and CsI
In this paper, the lattice constants, elastic anisotropies, and elastic constants (C11, C12 and C44) of three Cs halide materials, CsCl, CsBr and CsI have been investigated for the first time by using first-pr...
-
Article
Evolution of Inclusion Distribution in Continuous Casting Slabs During Strip Feeding
Feeding strip significantly enhances continuous cast slab quality. To clarify its impact on inclusion distribution, a mathematical model coupling flow, solidification and inclusion motion have been developed. ...
-
Article
Large Eddy Simulation of Molten Steel Flow and Inclusion Transport in a New Butterfly-Type Induction Heating Tundish
In addressing the retrofitting issues of conventional non-induction heating tundish, a novel butterfly-type induction heating tundish model was devised. A three-dimensional coupled mathematical model of magnet...
-
Article
Phase Diagram Study of the Nd2O3-SiO2-FeO-Fe2O3 System at 1773 K in Air
The phase diagram information of the Nd2O3-SiO2-FeO-Fe2O3 system is basic for the design and development of slag for recycling NdFeB magnets by pyrometallurgical processes. The equilibria phase relations of the N...
-
Article
Characterization of the Macroscale Struts and Microscale Substructures in Ti–6Al–4V Octet-Truss Metamaterials
Metamaterials, characterized by repeated unit cells and typically processed through additive manufacturing, represent a departure from traditional solid materials, showcasing inherent hierarchical structures. ...
-
Article
Experimental Determination of the Isothermal Sections and Liquidus Surface Projection of the Co–V–Zr System
The construction of the experimental liquidus surface projection and isothermal sections of the Co–V–Zr ternary system was based on the analyses of solidification microstructures and phase constituents. A new ...
-
Article
Generalized stacking fault energies of intermetallic compounds AlSc and MgSc at different pressures using first principles
Intermetallic compounds with B2 structure are used in aviation and aerospace, but lower ductilities are required for these materials. Here, to better understand the properties of this class of compound, the la...
-
Article
The light control resistance switch characteristics and conduction mechanism of BaTiO3/MoS2 structure
In this study, Cu/BaTiO3/MoS2/Cu nanodevices were fabricated through magnetron sputtering at room temperature, and the adjustable resistor switching (RS) functionality of the devices under dark and illuminated co...
-
Article
Unraveling the Influence of Static Magnetic Field on Carbide Precipitation and Mechanical Properties in Large-Scale H13 Hot Work Die Steel
In order to evaluate the potential application advantages of static magnetic field on the development of electroslag remelted large-scale H13 steel technology, the carbides, inclusions, solute segregation and ...
-
Article
A Study on the Corrosion Behavior of Ti-Containing Weathering Steel in a Simulated Marine Environment
The aim of this study is to evaluate the effect of titanium on the corrosion characteristics of bridge weathering steel plates in marine environments. The corrosion characteristics of steel containing differen...
-
Article
Effect of Solid Solution Treatment on the Wear Behavior and Subsurface Microstructure of 2205 Duplex Stainless Steel in Different Environments
This study investigated the friction and wear performance and the subsurface microstructure characteristics of 2205 duplex stainless steel under different environmental conditions through heat treatment at var...
