Skip to main content

and
  1. No Access

    Article

    Foaming Behavior of AlMg4Si8 Matrix and Pure Al Matrix Precursors in Closed Cavities with Different TiH2 Addition Levels

    The foamed structure of the central layer, predominantly governed by the addition levels of TiH2 and the composition of the precursor, in addition to the parameters associated with the foaming process, constitute...

    Guo Zhiqiang, Gong Yonglin, Zu Guoyin in International Journal of Metalcasting (2024)

  2. No Access

    Article

    Study on the Microstructure and Mechanical Properties of ZrB2/AA6111 Particle-Reinforced Aluminum Matrix Composites by Friction Stir Processing and Heat Treatment

    In this paper, the Al–K2ZrF6–KBF4 reaction system, a melt reaction method, was used to prepare in situ ZrB2/AA6111 particle-reinforced aluminum matrix composite. The modification of friction stir processing (FSP)...

    Sun Caizhi, Li Hui, Wang Feng, Han Xudong, He Wei in International Journal of Metalcasting (2024)

  3. No Access

    Article

    Foaming Behavior of AlSi8Mg4 Alloy in Closed Cavity

    As a new lightweight and energy absorbing structure, aluminum foam special-shaped parts have broad application prospects in many industrial fields, especially in the automotive industry. Aluminum foam special-...

    Guo Zhiqiang, Feng Zhanhao, Zu Guoyin in International Journal of Metalcasting (2023)

  4. No Access

    Article

    Effect of Ce Addition on the Thermal Conductivity and Mechanical Properties of Al-7Si-0.6Fe-0.5Zn Cast Alloy Treated by B/La/Sr Modification

    In order to further improve the thermal conductivity and mechanical properties simultaneously of the base alloy (Al-7Si-0.6Fe-0.5Zn alloy) treated by B/La/Sr modification, the La content was further optimized ...

    Gan Junqi, Pan Mengyao, Chen Qiming, Huang Meihong in International Journal of Metalcasting (2023)

  5. No Access

    Article

    Investigation of Vanadium Titanomagnetite Concentrate Activated Reduction

    Test methods including chemical analysis, X-ray-phase, and thermogravimetric analyses together with thermodynamic calculation are adopted to reveal the transition mechanism for Fe, V and Ti in an activated red...

    Zhang Jun, Qi Yuan-hong, Yan Din-liu, Wang Feng, Cheng **ang-li in Metallurgist (2022)

  6. No Access

    Article

    High-Efficiency Extraction of Fe, V, and Ti from Vanadium Titano-Magnetite Concentrate Based on Activated Reduction

    Methods of chemical analysis, XRD, and pH monitoring are adopted in order to study wet extraction of Fe, V and Ti based on activated reduction, and the control conditions as well as the degree of recovery are ...

    Zhang Jun, Wang Feng, Qi Yuan-hong, Yan Din-liu, Zhao Hai-quan in Metallurgist (2022)

  7. No Access

    Article

    Study on the mechanism of large-scale microwave absorption of ferroferric oxide coated with nano-SiO2

    With the continuous development of nanomaterials technology, the research on electromagnetic absorption of nanomaterials dispersed in large-scale sea has important application value. Therefore, the wave absorp...

    Song **nhua, Wang Feng, Zhou Haiyang in Journal of Materials Science: Materials in… (2021)

  8. No Access

    Chapter and Conference Paper

    Microstructure and mechanical properties of an electron beam welds in a spray-deposited Al-Zn-Mg-Cu alloy

    In this study, an electron beam welds produced in a spray-deposited Al-8.6Zn-2.6Mg-2.2Cu (wt,%) alloy were characterized by optical microscope (OM), scanning electron microscope (SEM), transmission electron mi...

    Wang Feng, **ong Baiqing, Zhang yongan, Zuo Yuting, Liu Hongwei in ICAA13 Pittsburgh (2016)

  9. No Access

    Article

    Microstructure, Mechanical Properties, and Age-Hardening Behavior of an Al-Si-Fe-Mn-Cu-Mg Alloy Produced by Spray Deposition

    It has been recognized generally that the spray-deposited process is an innovative technique of rapid solidification. In this paper, Al-20Si-5Fe-3Mn-3Cu-1Mg alloy was synthesized by the spray atomization and d...

    Wang Feng, Zhang Jishan, **ong Baiqing in Journal of Materials Engineering and Perfo… (2011)

  10. No Access

    Article

    Synthesis of nanocrystalline hydroxyapatite powders in stimulated body fluid

    Wang Feng, Li Mu-Sen, Lu Yu-Peng, Ge Sheng-Song in Journal of Materials Science (2005)

  11. No Access

    Article

    Sil−xGex/Si Multiple Quantum Well Wires Fabricated Using Selective Etching

    Using lithography, and selective etching the Si1-xGex/Si multiple quantum well wires are fabricated. The characteristics of the selective chemical etching of Si1-xGex and Si are investigated, and high-performance...

    Shi Yi, Wang Feng, Liu Jianlin, Zhang Rong, Gu Shulin in MRS Online Proceedings Library (1995)