-
Article
Laser Dry Cleaning of ZrO2 Particles from Air Bearing Surface of Magnetic Head Sliders
Laser dry cleaning of ZrO2 particles from air bearing surface(ABS) of magnetic head sliders has been investigated. The experimental results show that the cleaning threshold of removing ZrO2 particles from ABS is ...
-
Article
Mechanism of and method to avoid discoloration of stainless steel surfaces in laser cleaning
O3. Based on Auger Electron Spectroscopy analyses and optical microscopic observations, γ-Fe2O3 and Fe3O4 are formed on the stainless steel surface in laser cleaning in the air. Since laser can induce high temper...
-
Article
A theoretical model for laser removal of particles from solid surfaces
-
Article
Theoretical Modeling for Laser Cleaning of Micro-Particles from Solid Surface
In laser cleaning of micro-particles from solid surface, the adhesion force between the particles and the substrate surface and the thermal expansion of both particles and substrate play important roles in det...
-
Article
A Theoretical Model for Steam Laser Cleaning
A theoretical model for removal of tiny particles from solid surface covered with a thin liquid film by laser cleaning is established by taking adhesion force and cleaning force into account. When pulsed laser...
-
Article
Pulsed Laser Deposition of High Coercivity Barium Ferrite Films
Barium ferrite films with high coercivity (>2000 Oe) have been prepared on single crystal sapphire substrates by laser in-situ deposition. The structures of these films were characterized by x-ray diffractomet...
-
Article
Studies of Carbon Nitride Thin Films Synthesized by KrF Excimer Ablation of Graphite in Nitrogen Atmosphere
Carbon nitride thin films were deposited on silicon wafers by pulsed KrF excimer laser (wavelength 248 nm, duration 23 ns) ablation of graphite in nitrogen atmosphere. Different fluences of the excimer laser a...
-
Article
An energy approach to the modelling of particle removal by pulsed laser irradiation
An energy model to explain particle removal mechanism has been developed. This model is based on a detailed investigation of contact deformation of a particle on a solid surface, as well as particle motion dur...
-
Article
Scanning tunnelling microscopy imaging and modification of hydrogen-passivated Ge(100) surfaces
Scanning tunnelling microscopy (STM) study and modification of hydrogen (H)-passivated Ge(100) surfaces have been investigated. Thermal oxidation procedures were used to minimise surface roughness. Ge samples ...
-
Article
Laser writing of a subwavelength structure on silicon (100) surfaces with particle-enhanced optical irradiation
Spherical 0.5-μm silica particles were placed on a silicon (100) substrate. After laser illumination with a 248-nm KrF excimer laser, hillocks with size of about 100 nm were obtained at the original position o...
-
Article
Laser Writing of Nanostructures on Magnetic Film Surfaces With Optical Near Field Effects
Laser directly writing of nanostrucrures on magnetic film surfaces with optical near field effects has been investigated. Spherical 0.99 m or 0.47 m silica particles were placed on Cr/CoCrPt multilayers. After...
-
Article
Laser-induced removal of flash from heat sinks in integrated circuit packages
Laser-induced removal of flash from heat sinks in integrated circuit (IC) packages has been studied. It is found that flash can be effectively removed from heat sinks in plastic IC packages by laser deflashing...
-
Article
Photoluminescence from Silicon Nanocrystals Formed by Pulsed-Laser Deposition
Si nanocrystals (NCs) consisting of small crystals from 1 to 20 nm were formed by pulsedlaser deposition (PLD) in inert Ar gas and reactive O2 gas. The oxygen content of the Si NCs increases with increasing O2 am...
-
Article
Pulsed laser deposition of oriented barium ferrite (BaFe12O19) thin films
Barium ferrite (BaFe12O19) thin films have been deposited by pulsed laser deposition at 900 °C in 250 mTorr oxygen on Si substrates with Pt (111) underlayers. The barium ferrite films contained platelet grains an...
-
Article
Particle on surface: 3D-effects in dry laser cleaning
Previous analysis of dry laser cleaning within the frame of a one-dimensional (1D) model with homogeneous surface heating shows that this model disagrees with experiments by one–two orders of magnitude. The pa...
-
Article
Laser synthesis of new materials
The dual-beam laser ablation of different targets for synthesizing new materials within the overlap** plasma area has been investigated. This method is termed ‘laser synthesis of new materials’ and it is fle...
-
Article
Growth Temperature and Properties of Ge4Sb3Te3 Films
The growth temperature and properties of Ge4Sb3Te3 thin films are presented in this paper. The critical growth temperature of Ge4Sb3Te3 is between 300 and 340 °C. The Ge4Sb3Te3 films can only be grown on a substr...
-
Article
Structural and Optical Properties of Co-Doped ZnO Thin Films
Co-doped zinc oxide thin films (Zn1−xCo x O) have been deposited on c-plane sapphire substrates by dual-beam pulsed laser deposition. The films have lattice parameters similar to...
-
Article
Barium ferrite (BaFe12O19) thin films prepared by pulsed laser deposition on MgO buffered Si substrates
Barium ferrite (BaFe12O19) thin films have been deposited by pulsed laser deposition (PLD) on Si substrates with MgO underlayers. The films were deposited in oxygen atmosphere by excimer laser (λ=248 nm, pulse du...
-
Article
Room temperature diluted magnetic semiconductor synthesized by dual beam laser deposition
Diluted magnetic semiconductor Co-doped ZnO film has been synthesized by a dual beam pulsed laser deposition method. The magnetic, electrical, and optical properties of the Zn0.985Co0.015O0.67 film are studied in...