-
Article
Comparing study on single-beam and two-beam interference scanning for nanosecond laser-induced periodic structures on chromium metal
The strong thermal effect is an important factor that hinders the application of nanosecond laser in the fabrication of uniform laser-induced periodic surface structures (LIPSS), though it offers the advantage...
-
Article
Investigations on sintering behavior and microwave dielectric properties of MgNb2O6 ceramics do** with LiF
MgNb2O6 ceramics do** with different amounts of LiF (0–0.4 wt%) were prepared via a solid-state reaction method. The sintering behavior, phase evolution, microstructure, and microwave dielectric properties of t...
-
Article
Oxygen manipulation at the Co/SiO2 interface and its effect on spin-dependent transport properties
Oxygen manipulation at ferromagnetic metal (FM)/oxide heterointerfaces has been proved to be significantly effective in tailoring magnetic and transport properties. Herein, oxygen migration at the Co/SiO2 interfa...
-
Article
Direct Ink Writing of Flexible Electronics on Paper Substrate with Graphene/Polypyrrole/Carbon Black Ink
Direct ink writing is an interesting and attractive method to replace traditional fabrication techniques such as etching, milling, and lithography for flexible electronics because of its simple process, low co...
-
Article
Temperature stable microwave dielectric ceramics in Li2ZnTi3O8–based composite for LTCC applications
A temperature stable low temperature co-fired ceramic (LTCC) was fabricated by the powder mixture of Li2ZnTi3O8 ceramic, TiO2 τf-tailoring dopant and B2O3–La2O3–MgO–TiO2 (BLMT) glass sintering aid, and the sinter...
-
Article
Investigation of Li2Zn3Ti4O12-based temperature stable dielectric ceramics for LTCC applications
A low temperature co-fired ceramic (LTCC) was fabricated at 910 °C /2 h from the powder mixture of Li2Zn3Ti4O12, TiO2 and a B2O3–La2O3–MgO–TiO2 glass (BLMT), and the influence of TiO2 on microstructure and dielec...
-
Article
Low loss and temperature stable microwave dielectric ceramics in (1 − x)Li2TiO3–xLi2Mg3TiO6 (0.1 ≤ x ≤ 0.5) system
The (1 − x)Li2TiO3–xLi2Mg3TiO6 (x = 0.1, 0.15, 0.2, 0.3, 0.4, 0.5) ceramics system was fabricated by solid-state synthesis. Test results of X-ray diffraction and electron diffraction spectrum show that all cerami...
-
Article
Low temperature sintering process, phase evolution and dielectric properties of BaTi4O9-filled B–La–Mg–Ti–O glass/ceramic composites
Low temperature co-fired ceramics composite is fabricated by mixing B2O3–La2O3–MgO–TiO2 (BLMT) glass matrix with BaTi4O9 ceramic filler and the influence of the filler on sintering behavior, phase composition, mi...
-
Article
The influence of BBZ glass on phase evolution, sintering behavior and dielectric properties of BaTi4O9 ceramics
A low temperature co-fired ceramic (LTCC) material has been fabricated by mixing BaTi4O9 ceramic powder with a BaO–B2O3–ZnO (BBZ) glass and sintering the mixture at 925 °C/2 h. The influence of the BBZ glass on s...
-
Article
A novel temperature-stable and low-loss microwave dielectric using Ca0.8Sr0.2TiO3- modified Li2Mg3TiO6 ceramics
Microstructure and microwave dielectric properties of (1-x)Li2Mg3TiO6-xCa0.8Sr0.2TiO3 (x = 0.03, 0.06, 0.08, 0.09, 0.12) ceramics prepared by the conventional solid state route have been investigated. XRD and SEM...